Alongside the Honor Play 80 Plus,Honor today announced another budget smartphone called the Honor Play 70C. The phone gets the basics right and targets the most entry-level segment.
The phone starts at 599 yuan (around $90) for the 4GB RAM and 64GB storage version. There are two other configurations: 4GB + 128GB at 699 yuan and 6GB + 128GB at 799 yuan.
Honor Play 70C Specifications
For the price, the Honor Play 70C features a 6.75-inch IPS LCD with a 90Hz refresh rate and a 720 × 1600 resolution. The panel includes a waterdrop notch that houses a 5MP front-facing camera, which is about what you’d expect at this price point.
On the back, the device has a single 13MP main camera capable of shooting 1080p video and supporting up to 10x digital zoom.
Powering the phone is the MediaTek Helio G81 Ultra chipset, paired with up to 6GB of RAM and 128GB of storage. It’s backed by a relatively large 5,300mAh battery.
The Play 70C runs Android 15 with MagicOS 9.0 out of the box. Connectivity options include dual SIM 4G, dual-band Wi-Fi, Bluetooth 5.1, GPS, and even a 3.5mm headphone jack.
Honor is offering the phone in multiple color options, including Midnight Black, Moonlight Silver, and Ocean Blue (also referred to as Ink Rock Black, Moonlit Silver, and Lake Blue in some listings). The device itself is fairly slim at 7.89mm and weighs 186 grams.
The Honor Play 80 Plus is a better phone with a larger 7,500mAh battery and a Snapdragon 4 Gen 4 chipset. But the Play 70C sticks to the basics, a low-cost phone that focuses on battery life, modest performance, and just enough features to get by.
For more daily updates, please visit our News Section.
Ugreen has introduced a new 45W power bank, the Rhythm Series S45 (model PB603), currently listed on JD.com in China for 199 yuan ($29). It features a standard 10,000mAh capacity and is designed to address a very common annoyance: remembering your battery pack but forgetting the charging cable. By integrating a built-in USB-C cable, it offers a straightforward solution for keeping your devices powered on the go.
Ugreen PB603 Power Bank Specifications
The device measures 152 x 71 x 29.8 mm. On the outside, it has a ripple-textured finish to help with grip and a small TFT digital display on the front to clearly show the remaining battery percentage.
The built-in 45W USB-C cable sits at the top, supports the PD3.0 fast charging standard, and features a braided finish to handle standard wear and tear. Ugreen hasn’t detailed the rest of the port selection yet.
Inside the casing, the power bank uses ATL battery cells, which are generally known in the industry for their reliability. Ugreen notes that this model includes updated battery technology aimed at extending its overall lifespan.
The company states the new model offers a 166% improvement in charge cycle longevity over its previous generation, which was rated for around 300 cycles.
For safety, it uses a proprietary Battery Management System (BMS) to monitor charging conditions. According to the company, the device has gone through over 150 testing procedures to meet China’s latest 3C safety standards.
Some of these tests are quite specific, for instance, Ugreen says the battery cell passed a puncture test with a 4mm steel needle and withstood 1.43 tons of pressure without catching fire or failing. It also reportedly survived a 135°C heat chamber test.
To keep things cool during standard 45W fast charging, the device relies on a four-layer cooling system. This includes high thermal conductivity graphene materials and an NTC intelligent temperature control system that Ugreen says performs up to 360,000 temperature checks per hour to prevent overheating.
In related news, OnePlus has recently introduced a 15,000mAh power bank with 120W fast charging and advanced battery safety technology.
For more daily updates, please visit our News Section.
The global smartphone market in early 2026 turned out to be increasingly top-heavy. According to market research firm Counterpoint Research, the iPhone 17 was the best-selling smartphone globally in Q1 2026, grabbing 6% of all global smartphone sales on its own.
The iPhone 17 Pro Max and iPhone 17 Pro followed right behind in second and third place, meaning Apple owned the top three spots on the list entirely.
Senior analyst Harshit Rastogi says the iPhone 17 outperformed its predecessor by a clear margin. The base model got meaningful upgrades this time with more storage out of the box, a higher-resolution camera, and a faster screen refresh rate. This narrowed the gap between the standard and Pro models, which seems to have pushed more buyers toward the cheaper option.
Sales in China and the US grew by double digits year-over-year. South Korea was even better, where sales tripled compared to the previous generation.
Android’s budget segment dominates the market
On the Android side, Samsung dominated with five spots in the top ten, all from its Galaxy A budget lineup. The Galaxy A07 4G was the top-selling Android phone of the quarter, driven by demand in the Middle East, Africa, and Latin America. Samsung is now promising six years of software updates on these devices.
The Galaxy S26 Ultra didn’t crack the top ten, though Samsung says it opened stronger than the S25 Ultra did.
Redmi A5
The only Chinese brand to make the list was Xiaomi, with the Redmi A5 landing at number ten. It’s also the cheapest device on the list and has held steady demand in emerging markets since launch.
All in all, the top ten phones accounted for 25% of all global smartphone sales, the highest share ever recorded for a first quarter. Two things explain that: iPhone 17 demand stayed strong, and a memory chip shortage pushed up component costs, which squeezed Android manufacturers trying to compete at lower price points.
Counterpoint’s Karn Chauhan says the overall phone market is likely to shrink in 2026, with the budget segment taking the hardest hit. Manufacturers seem to know this already, as most are shifting resources toward higher-end products rather than racing to sell volume.
Xiaomi seems to be getting ready to bring another budget tablet to more markets, this time under the Poco brand. A new FCC listing has revealed details of what is expected to launch as the Poco C Pad.
The tablet showed up in the FCC database with model number 2603APC14G. The filing itself does not mention the Poco C Pad name, but the same model number has already been linked to it through Xiaomi’s HyperOS code. The listing also confirms support for 18W charging, though it looks like a charger may not be included in the box.
One small detail that stands out is the color options. The device is listed in Pantone finishes, including Cool Gray and Red. It adds a bit of personality to what is otherwise a fairly straightforward tablet.
In terms of hardware, this is not entirely new. The Poco C Pad is expected to be a rebranded version of the Redmi Pad 2 9.7, which Xiaomi launched recently in some markets. So the overall experience should be quite similar.
That means a 9.7-inch LCD display with a 2K resolution and a 120Hz refresh rate, along with a slim metal body that keeps things relatively light at just 401 grams. Under the hood, it is powered by the Snapdragon 6s Gen 2 4G processor, paired with up to 4GB of RAM and 128GB of storage, expandable via microSD.
The rest of the setup is fairly standard. You get an 8MP rear camera, a 5MP front camera, dual speakers, a headphone jack, and optional 4G connectivity. Nothing flashy, but enough for everyday use. The tablet packs a 7,600mAh battery, which Xiaomi claims can last well over a day on mixed usage. It runs HyperOS 3 based on Android 16, with features like cross-device integration and some AI-assisted tools built in.
Pricing should stay on the lower side. In markets like Malaysia, the Redmi version starts at around RM560, which is equivalent to US$140. Prices may vary across regions, but it should stay in a similar range.
With certification already in place, an official announcement does not seem too far away.
Zebronics has added a new flagship soundbar to its home audio lineup in India. The ZEB-Juke Bar 9890 is a 5.1.2 channel system that supports both Dolby Atmos and DTS:X. It is currently available on Amazon and Flipkart with a launch price of ₹29,999 ($315).
Zebronics ZEB-Juke Bar 9890 Specifications
The system has a total stated output of 1030W RMS, which is divided among a few different components. The main soundbar unit contains five drivers, three facing forward and two pointing upward to handle the height channels required for spatial audio formats.
The package also includes two rear satellite speakers and an 8-inch (20.32cm) subwoofer. Because the rear speakers and subwoofer connect wirelessly to the main bar, it cuts down on the amount of cabling needed across the living room, making the initial setup a bit more straightforward.
For audio processing, the soundbar relies on its up-firing drivers to bounce sound off the ceiling, simulating overhead audio for Dolby Atmos and DTS:X tracks. Zebronics also includes its own internal audio processing, which it calls Zeb-AcoustiMax, designed to manage the surround sound distribution.
Physically, the soundbar and satellite speakers are wrapped in a dark fabric finish, a common design choice intended to help the hardware blend in with standard living room furniture. The main bar features a basic LED display on the front to show the current input or volume level, and the unit includes the necessary hardware to be mounted to a wall.
The connectivity options cover the standard requirements for a modern TV setup. The primary connection is HDMI eARC, which is necessary to transmit high-bandwidth audio formats directly from the TV.
It also features an optical input, a 3.5mm auxiliary jack, and a USB port for playing MP3 files from a flash drive. For wireless audio playback from a phone or tablet, it uses Bluetooth 5.3.
In related news, Sony has recently introduced the HT-B500 soundbar with Dolby Atmos, DTS:X, and a 3.1-channel configuration, while boAt has launched the Aavante Prime X, a wireless 7.1.4 Dolby Atmos soundbar delivering 700W output
For more daily updates, please visit our News Section.
Smart rings are becoming pretty common, and RingConn has just announced its third-generation model. The main updates for the RingConn Gen 3 are a built-in vibration motor and a feature that tracks nighttime blood pressure trends. It costs $349 globally (or $314 if you pre-order) and, like the company’s previous models, it doesn’t require a monthly subscription to use the companion app.
RingConn Gen 3 Specifications
Physically, the Gen 3 is a titanium ring with a medical-grade epoxy resin on the inside. It’s about 2.3mm thick and weighs between 2.5 and 3.5 grams depending on the size you get, which keeps it in line with the standard footprint for this category. The sensors inside are what you’d expect: an optical heart rate sensor, a temperature sensor, and an accelerometer.
The most noticeable hardware change is the vibration motor. Putting haptic feedback in a ring without making it bulky or severely draining the battery is usually tricky, but RingConn included it to give you physical nudges.
The ring vibrates for things like a low battery, high stress, or if you’ve been sitting still for too long. It’s a small change, but it means you don’t have to look at your phone as often to know what the ring is doing.
On the health tracking side, RingConn is introducing a feature it calls Vascular Health Insights. It is important to note that this isn’t a medical diagnostic tool. Instead, it monitors your blood pressure trends automatically overnight while you sleep. The goal is to show you how your daily habits might be affecting your vascular patterns over time.
The Gen 3 also adds sleep apnea pattern tracking and full-cycle predictions for women. For daily use, it tracks standard metrics like blood oxygen, stress, and workouts, with automatic detection for basic exercises like walking, running, and cycling.
Coming to the battery life, RingConn says the Gen 3 lasts 11 to 14 days if you turn the vibrations off, and 10 to 12 days if you leave them on. It comes with a wireless charging case that holds up to 150 days of standby charge and takes about 90 minutes to recharge the ring. It’s also water-resistant up to 10ATM, so you don’t need to take it off to shower or swim.
The ring works with both iOS and Android, and it syncs with Apple Health and Google Health Connect. If you happen to be away from your phone, the ring can store up to 10 days of data locally.
In related news, Rogbid has recently launched the SR15 smart ring, offering health tracking features along with vibration-based alerts.
For more daily updates, please visit our News Section.
Google has already released four betas of Android 17, which are more than enough to show us what the upcoming version has in store. There are some new, exciting features, as well as many essential upgrades to existing ones, that make the software more useful and feature-rich.
With the stable Android 17 release approaching, here are the eight features or upgrades I can’t wait to try.
1. A native app lock, finally
Google is finally bringing the ability to lock individual apps, a feature users have been requesting for years. You will be able to lock apps directly from the home screen by long-pressing an app icon and choosing the “App lock” option from the quick options menu.
You can set up app lock using a PIN, pattern, password, or biometrics like fingerprint or face unlock, without needing a third-party app. This feature on the Google Pixel works just like any other app lock, but keep in mind that notifications for a locked app, along with all associated shortcuts and widgets, will be hidden.
Google notes that certain AI features, such as Gemini’s screen automation, may still be able to interact with apps, depending on permissions. You’ll be notified if other apps have access to the app you’re locking.
Most Android skins, including One UI, already have this feature, but it’s a nice welcome addition for Google Pixels.
2. Floating app bubbles make multitasking easier
The bubble feature has been around for quite a few years now, but it was restricted to messaging and conversations. Android 17 takes it a major step forward by allowing users to turn any app into a floating bubble.
For example, if you’re watching a tutorial on YouTube and noting important steps on Google Keep, you’ll be able to convert Google Keep into a floating bubble for quicker access. When you tap the Keep bubble, the app will open in a small floating window, while the YouTube tutorial plays in full screen. This is better than switching between the two apps and using them in a split-screen view.
You will be able to close an app bubble by dragging it to the bottom of the screen.
Bubbles are more useful on large-screen devices like foldables or tablets where the user has more screen to work with than on a regular smartphone.
3. A more powerful screen recording with a preview screen
Android 17 will upgrade the screen recording experience with a more refined UI and a new preview screen. Currently, when you tap the screen recording tile in Quick Settings, a pop-up shows up asking about the recording area and audio options.
In Android 17, when you tap the screen recording tile, a new floating pill interface will show up, letting you choose what to record, whether to record device audio or microphone (or both), and whether to show touches. You can tap the status indicator in the status bar to bring back the floating pill UI.
Once you stop the recording, you’ll see a new preview screen where you can play, edit, delete, or share the clip instantly without opening the gallery.
4. Mandatory Large-Screen Adaptivity
Google enforces a stricter policy on app resizability and orientation, preventing developers from restricting apps to a single orientation on large devices (sw ≥ 600dp). This effectively skips smartphones (generally below 600dp) and targets tablets and larger-screen devices.
The latest move is designed to make Android apps truly adaptive. On a device running Android 16 or an earlier build, if you open a portrait-locked app on a landscape tablet, the app appears as a tall, narrow window in the center of the screen, with thick black bars on the sides. In Android 17, the app would rotate to fill the gap, resulting in a more usable screen and better app experience.
Games are exempted from these strict mandates to ensure they don’t break during critical gameplay.
Google began phasing out apps’ ability to restrict screen orientation and resizability on large-screen devices with Android 16. However, it still allowed app developers to opt out of this change. But Android 17 makes it mandatory, and developers will no longer be able to opt out.
5. Hide app names on the home screen
In the Beta 3 build, Google introduced a feature that lets users hide the app labels on the home screen. This isn’t a big step, but it helps users create a cleaner home screen setup.
To hide app labels, you’ll need to go to Wallpaper & style, tap Home screen, select Icons, tap the Names tab at the bottom, and turn off the toggle for Show app names. Keep in mind that this won’t affect the app drawer or apps inside folders.
6. Separate Wi-Fi and mobile data toggles
On Pixel devices running Android 16 or earlier, if you need to switch between Wi-Fi and mobile data, or turn them on or off, you must open Quick Settings, tap the Internet tile, and then perform the action.
Many users have expressed their frustration with the extra step required to access Wi-Fi or mobile data. After nearly four and a half years, Google is finally allowing users to add separate Wi-Fi and mobile data toggles in Android 17.
This change would particularly benefit Pixel users, as most other Android skins, including Samsung’s One UI and OnePlus’s OxygenOS, already have it.
7. Give apps limited access to your contacts
Right now, there’s no way to give apps access to specific contacts. If you grant the contacts permission, the app will have access to all contacts stored on your device.
This is certainly not a privacy-focused approach, and therefore, Google is introducing a new system-level Contact Picker interface that will allow users to select one or more contacts to share with an app at a time. Google says apps won’t be able to track any changes you make to a contact’s information.
Contact Picker grants temporary, session-based read access to the specific data fields selected by the user. That means the app will need to request permissions again after the session timeout, further strengthening users’ privacy.
8. Seamless task continuity on another device
Google is working on a “Task Continuity” feature, which will allow users to sync notifications, share files, and continue apps across their linked Android devices. Essentially, you will be able to transfer an app’s current state from one Android device to another. This feature could debut with Android 17.
This feature will show a suggestion on the taskbar representing the running app from another device. When you click this suggestion, the system initiates the handoff and passes the remote app’s state, as Android Authority explains.
Google announced the new Handoff API in Android 17 Beta 2, which allows developers to specify the application state to resume on another device. Once enabled, the Android system displays a handoff suggestion in the launcher of the user’s nearby devices.
Final build may not include all of them
If you’ve been following Android releases, you’d know that Google doesn’t include all the features from the beta builds into the final package. But there’s a very good chance some of them will make it to the final release.
All the features we’ve discussed so far are available in the Android 17 beta releases. You can get an eligible Google Pixel to test them or wait for the stable release, which could happen around June 2026.
We’ll regularly update you with the latest information in the Android 17 section on this website. You can visit the page regularly for the latest details, or join our Telegram channel for instant updates.
2026’s flagship race is already settled, at least on paper. The phones launched between January and April — from Samsung, Xiaomi,OPPO, Vivo, Honor, Motorola, Huawei, and iQOO — will define what a high-end Android phone looks like for the rest of the year.
New chipsets will come, but these are the devices most people will be comparing, buying, and arguing about through December. So here’s what actually shipped, and what each one is trying to do.
January
Motorola Razr Fold
Motorola introduced the Razr Fold at CES 2026 as its first book-style foldable. Unlike the Razr’s usual clamshell form, this one opens up like a tablet, with an 8.1-inch 2K LTPO inner display and a 6.6-inch cover screen. The cover screen is large enough that you can handle most everyday tasks without unfolding the device.
The camera setup is all 50-megapixel across the board: a Sony LYTIA main sensor, an ultra-wide with macro support, and a periscope telephoto with 3x optical zoom. There’s also a 32MP camera on the outer display and a 20MP shooter on the inner screen. Video recording supports Dolby Vision. The phone also supports Motorola’s Moto Pen Ultra stylus.
Honor Magic 8 RSR Porsche Design
Honor kicked things off with the Magic 8 RSR Porsche Design, which went on sale in China on January 23rd. The phone is what it sounds like: a high-end device made in collaboration with Porsche Design, with finishes called Slate Gray and Moonstone, and a back panel made of microcrystalline nano-ceramic material that Honor says has a Mohs hardness rating of 8.5.
Inside, it runs Qualcomm’s Snapdragon 8 Elite Gen 5, with configurations going up to 24GB of RAM and 1TB of storage. The camera setup includes a 50MP main sensor, a 50MP ultra-wide, and a 200MP telephoto with 3.7x optical zoom and up to 100x digital zoom. Battery is 7,200mAh with 120W wired and 80W wireless charging. It also supports satellite communication and IP68/IP69K water resistance.
Honor is also selling an optional photography kit with a magnetic grip, filter adapter, and external telephoto lens. It runs MagicOS 10 with Porsche Design-themed UI elements layered on top.
February
Samsung Galaxy S26 Series
Samsung’s February Unpacked event brought the Galaxy S26, S26+, and S26 Ultra. The base S26 has a 6.3-inch FHD+ Dynamic AMOLED 2X display, while the S26+ bumps that up to 6.7 inches at QHD+ resolution. Both have 1-120Hz adaptive refresh rates and Gorilla Glass Victus 2.
Galaxy S26 and S26 Plus
Depending on your region, these phones ship with either the Exynos 2600 or the Snapdragon 8 Elite Gen 5. The main camera across the standard models is a 50MP sensor, paired with a 12MP ultra-wide and a 10MP telephoto with 3x zoom. The S26 has a 4300mAh battery, the S26+ has a 4900mAh battery, and both support Qi2 wireless charging at 20W.
Samsung Galaxy S26 Ultra
The S26 Ultra takes a different direction. It has a 6.9-inch QHD+ display with Gorilla Armor 2, runs exclusively on the Snapdragon 8 Elite Gen 5, and includes a 200MP main camera, a 50MP ultra-wide, a 10MP telephoto at 3x, and a 50MP periscope lens at 5x zoom. Battery is 5000mAh with Super Fast Charging 3.0. The S Pen is still here. The software on all three runs One UI 8.5 on Android 16, with AI features like Photo Assist, Now Brief, and Creative Studio built in.
Xiaomi 17 Ultra
Xiaomi launched the 17 Ultra in China in February, and it arrives with one of the more interesting camera setups of the year. The main camera uses a 1-inch Light Fusion 1050L sensor co-developed with Leica, shooting at 50MP. The telephoto is a 200MP Leica-certified lens that supports lossless optical zoom between 75mm and 100mm, going up to 400mm digitally. The ultra-wide is a 50MP sensor with 115-degree FOV.
The display is a 6.9-inch OLED with up to 3,500 nits peak brightness, 1-120Hz adaptive refresh rate, and Dolby Vision support. It runs Snapdragon 8 Elite Gen 5, and Xiaomi says the phone can mirror and control Apple devices through its HyperOS 3.0 software.
The battery is 6,800mAh, the largest in any Xiaomi Ultra device. It charges at 90W wired and 50W wireless. Despite all of that, Xiaomi says the 17 Ultra is the thinnest Ultra device it has made, at 8.29mm.
iQOO 15 Ultra
The iQOO 15 Ultra is a performance-first phone, and it makes that clear from the spec sheet. The display is a 6.85-inch flat Samsung AMOLED at 2K resolution with a 144Hz refresh rate and 8,000 nits peak brightness. The touch sampling can go up to 4000Hz.
The phone runs Snapdragon 8 Elite Gen 5 alongside iQOO’s in-house Q3 esports chip, and the company claims an AnTuTu score of 4.51 million.
iQOO 15 Ultra
For cooling, it has a 59-blade fan and an 8,000mm² vapor chamber. The phone also includes pressure-sensitive shoulder triggers and a 500Hz gyroscope. Battery is 7,400mAh with 100W wired and 40W wireless charging.
On the camera side, it’s a triple 50MP system consisting of main, ultra-wide, and periscope telephoto with 3x optical zoom. Not the headline feature here, but solid. It runs OriginOS 6 on Android 16 and supports 8K video recording.
March
OPPO Find X9 Ultra
OPPO’s Find X9 Ultra is the most camera-forward device on this list. It’s the only 2026 flagship to use two 200MP cameras, one for main and another for 3x telephoto. Both deliver maximum detail in portrait and general photography. There’s also a dedicated 50MP 10x optical zoom telephoto and a 50MP ultra-wide.
OPPO is leaning hard on the Hasselblad partnership here. The new Hasselblad Master Mode includes features like True Detail for 8K output across six focal lengths, a full-link ProXDR pipeline, and nine film presets that try to simulate real film color behavior rather than just slapping a filter on.
Video-wise, it supports 8K at 30fps and 4K at 120fps in 10-bit Log format, along with custom 3D LUT import and an ACES color management workflow. TILTA accessories like ND filters and manual focus grips are available for it. The phone runs Snapdragon 8 Elite Gen 5 with a 144Hz 2K display, a 7,050mAh battery with 100W wired and 50W wireless charging, and IP66/IP68/IP69 water resistance.
OPPO Find N6
OPPO’s Find N6 is pitching itself as the world’s flattest foldable, and the engineering behind that claim is genuinely interesting. The hinge uses a bionic four-axis structure built with chip-level polymer 3D printing, reducing surface unevenness to 0.1mm. Paired with memory glass that restores up to 99.9% flatness after folding, the crease situation is about as controlled as any foldable has managed. It’s TÜV certified for 600,000 folds.
The inner display is an 8.12-inch QXGA+ foldable OLED, and the outer cover screen is a 6.62-inch FHD+ AMOLED, both running 1-120Hz adaptive refresh with 240Hz touch sampling. The outer panel peaks at 3,600 nits.
Cameras follow the same Hasselblad-partnership playbook as the Find X9 Ultra: a 200MP main with dual-axis OIS leads, supported by a 50MP ultra-wide, a 50MP 3x telephoto, and a dedicated Danxia color calibration lens. It supports 8K stills and 4K 120fps Dolby Vision video.
The chipset is the Snapdragon 8 Elite Gen 5, paired with a 6,000mAh battery, 80W wired and 50W wireless charging. It folds to 8.93mm and weighs 225g, with IP56/IP58/IP59 ratings.
Vivo X300 Ultra
Vivo’s X300 Ultra follows a similar camera-first philosophy as the Find X9 Ultra, but leans into a Zeiss partnership instead of Hasselblad. The camera array includes a 50MP ultra-wide (Sony LYTIA 818), a 200MP main camera (Sony LYTIA 901), and a 200MP telephoto (Samsung HP0) with gimbal-level stabilization.
Vivo X300 Ultra – Victory Green
Vivo is also selling two external teleconverter modules, one for 200mm and one for 400mm. The imaging system supports 4K 120fps Dolby Vision and 4K 120fps 10-bit Log recording, along with 3D LUT imports and ACES workflows.
The display is a 6.82-inch 2K LTPO AMOLED at 144Hz. Battery is 6,600mAh with 90W wired and 40W wireless charging. It runs OriginOS 6 on Android 16 and carries IP68/IP69 ratings.
April
Huawei Pura 90 Pro and Pura 90 Pro Max
Both the Huawei Pura 90 Pro and 90 Pro Max share the same XMAGE imaging philosophy and a Red Maple multispectral lens, but the Pro Max gets better hardware meaningfully across the board.
The Pro Max camera system leads with a 50MP RYYB main sensor (1/1.28-inch) with OIS, LOFIC tech, and a variable aperture from f/1.4 to f/4.0. The telephoto is a 200MP RYYB periscope unit with 4x optical zoom, up to 8x optical-quality zoom, CIPA 7.0 stabilization, and what Huawei calls an industry-first three-in-one super concentrating prism. Rounding it out is a 40MP RYYB ultra-wide.
The standard Pro keeps the same main sensor and aperture setup but steps down to a 12.5MP ultra-wide and a 50MP periscope telephoto.
Both phones run on the Kirin 9030S, a step below the Kirin 9030 Pro found in the Pura X Max foldable. Huawei claims a 200 percent improvement in NPU image understanding over the previous generation, with gains in AI ISP color processing, telephoto video clarity, and stabilization accuracy. AI features are central to the software pitch — AI pose recommendations, composition assist, portrait retouching, and one-click photo creation are all present, alongside an upgraded Xiaoyi assistant with real-time pointing recognition and voiceprint detection.
The Pro Max has a 6.9-inch display; the Pro gets 6.6 inches. Both use single-punch-hole cutouts. The Pro Max also gets Kunlun glass protection, which Huawei says cuts reflections by 70 percent and improves scratch resistance up to 16 times over standard glass. Both phones run HarmonyOS 6.1.
OnePlus Ace 6 Ultra
The OnePlus Ace 6 Ultra is squarely aimed at mobile gamers. It runs on the MediaTek Dimensity 9500, built on TSMC’s third-gen 3nm process, with OnePlus claiming a 32% performance uplift and 55% better power efficiency over the previous generation.
Keeping things cool is a 6,000mm² vapor chamber that sits alongside a Glacier Cooling System and a deeper integration of OnePlus’s Wind Chaser Gaming Kernel.
OnePlus Ace 6 Ultra
The headline accessory is an optional Strix Gaming Controller with a joystick-free layout, mechanical triggers rated at 1.8ms response time, a dedicated e-sports chip, and support for magnetic cooling modules. It’s the kind of peripheral ecosystem you’d more typically associate with a dedicated gaming phone brand.
The display is a 6.78-inch 1.5K LTPS OLED at 165Hz with 4,000Hz instantaneous touch sampling. As for cameras, it has a 50MP main with OIS and an 8MP ultra-wide unit. The battery is a large 8,600mAh dual-cell unit with 120W wired charging. It runs ColorOS 16 on Android 16, and carries IP66/IP68/IP69/IP69K ratings.
For more daily updates, please visit our News Section.
The upcoming Honor 600 series is gearing up for its China debut later this month, and new leaks have revealed some exciting upgrades. According to tipster Digital Chat Station, the China variant could bring major improvements, especially in battery capacity and color options.
One of the biggest highlights is the massive battery upgrade. While the global version already offers a large 7000mAh battery, the China model is expected to push this further to around 8500mAh to 9000mAh, making it one of the biggest batteries in a mainstream flagship-style smartphone. This suggests a strong focus on long-lasting performance and heavy usage without frequent charging.
In terms of design, the Honor 600 series will reportedly arrive in six vibrant colors, including Good Orange, Lucky Star, Jasmine White, Green Apple, Light Feather Blue, and Obsidian Black. The device is also said to feature a premium metal frame and high durability ratings, including IP68, IP69, and IP69K protection against dust and water.
The smartphone is expected to sport a 6.57-inch 1.5K flat display with a 120Hz refresh rate and ultra-slim 0.98mm bezels on all sides. It will also use 3840Hz PWM dimming technology, aimed at improving eye comfort during extended use.
Under the hood, the device is rumored to be powered by the flagship Snapdragon 8 Elite chipset, paired with MagicOS 10 based on Android 16.
For photography, the Honor 600 series could feature a 200MP main camera, along with a 12MP ultra-wide lens and a 50MP 3.5x periscope telephoto sensor. A 50MP front camera is also expected for selfies.
Overall, the China variant of the Honor 600 series appears to focus heavily on battery life while retaining flagship-grade performance and camera capabilities.
Honor has quietly introduced the Honor Play 80 Plus in China, adding a new entry to its budget lineup with a focus on battery life and everyday performance. The device stands out with a large 7,500mAh battery, a 120Hz display, and Qualcomm’s latest Snapdragon 4 Gen 4 platform. It also brings MagicOS 10 based on Android 16, positioning it as a modern entry-level 5G option. Here is a closer look at what the phone offers.
Honor Play 80 Plus specifications and features
Honor Play 80 Plus
The Honor Play 80 Plus features a 6.61-inch TFT LCD screen with a resolution of 720 x 1604 pixels and a 120Hz refresh rate. The panel supports eye protection features and delivers a 20.05:9 aspect ratio. Like the recent Honor phones, the Play 80 Plus runs on MagicOS 10 based on Android 16.
Powering the device is the Snapdragon 4 Gen 4 chipset, making it the first phone to feature this platform. Announced in December 2025, the 4nm processor comes with an octa-core setup featuring 2 x 2.3GHz Cortex-A78 performance cores and 6 x 1.95GHz Cortex-A55 efficiency cores paired with the Adreno 613 GPU. The chipset focuses on improved power efficiency, better AI handling, and stable connectivity. It is designed to handle daily tasks smoothly while keeping battery consumption in check, which aligns well with devices targeting long endurance.
Honor Play 80 Plus
The phone includes a 13-megapixel rear camera with an f/1.8 aperture and a 5-megapixel front camera. The device is backed by a huge 7,500mAh battery with support for 45W fast charging. Additional features include dual SIM support, Bluetooth 5.0, dual-band Wi-Fi, a side-mounted fingerprint sensor, and a USB-C port. The device measures 163.9 x 75.9 x 8.29mm and weighs around 205 grams.
Honor Play 80 Plus price and availability
The Honor Play 80 Plus is available in Aquamarine, Black, and Gold color options. Pricing in China starts at 1,699 Yuan (~$250) for the 6GB+128GB variant and goes up to 2,099 Yuan (~$310) for the 8GB+256GB model. The device is already on sale in China, but there is no confirmation yet regarding its global availability.
For more daily updates, please visit our News Section.
Lenskart first introduced its AI-powered smart eyewear, B by Lenskart, back in November 2025, offering an early glimpse at its vision for connected wearables. The company has now moved a step further by opening early access, with the official microsite revealing key details about the pricing and full specifications.
B by Lenskart smart glasses specifications and features
B by Lenskart
The B by Lenskart smart glasses are designed to feel like regular eyewear, weighing around 45g and supporting prescription lenses from -6 to +6. Under the frame, the device runs on the Qualcomm Snapdragon AR1 Gen 1 platform, paired with 32GB internal storage. It supports Bluetooth 5.3 and works with devices running iOS 18 and above or Android 12 and above. Interaction is handled through touch controls and voice commands, including a wake phrase for the built-in assistant powered by Google Gemini.
For imaging, the glasses feature a 12 megapixel Sony camera with a 16mm ultra-wide lens. It captures photos at up to 4032 x 3024 resolution and records videos at 1080p in landscape and 1440 x 1920 in portrait at 30fps. Audio is handled through dual directional speakers, while a three-microphone setup supports calls and voice inputs.
B by Lenskart
Battery life is rated at up to 4 hours on a single charge, with the included charging case extending total usage to up to 48 hours. Fast charging is supported, with 50 percent charge achieved in around 15 minutes. The glasses can be charged through the case or directly using a cable.
B by Lenskart smart glasses price and availability
The B by Lenskart smart glasses are priced at Rs 22,000 (~$230) as an early access offer, compared to a listed price of Rs 27,000 (~$285). They are available in Black and Silver colour options and come bundled with a charging case.
The product is currently open for waitlist registrations, indicating a phased rollout. Features like real-time AI assistance, multi-language support, note-taking and hands-free capture position it as more than just a wearable accessory.
For more daily updates, please visit our News Section.
Inllie has introduced two new wearable devices, the Luna Core Bracelet and Sense Core Band, bringing a different take on everyday fitness tracking. The announcement highlights a shift towards blending wellness features with a more refined design language, setting the tone for what these devices aim to deliver.
Inllie Luna Core Bracelet and Sense Core Band features and design
Inllie smart bracelets
The Inllie Luna Core Bracelet is designed to resemble a piece of jewellery, featuring a stainless steel bracelet paired with a zinc alloy and epoxy resin case. It includes gold and silver accents, giving it a polished look suitable for both casual and formal wear. The device weighs 11.6g, making it comfortable for extended use. The Sense Core Band follows a slimmer and more conventional design, with a 5.6mm thin body and a weight of 16.5g. It offers strap options, including metal Milanese and silicone, allowing flexibility between style and practicality.
Inllie smart bracelets
Both devices focus on integrating health tracking into daily wear without appearing overly sporty. They support heart rate monitoring, blood oxygen levels, stress tracking, heart rate variability, menstrual cycle tracking, sleep insights, step count, and multiple exercise modes. The Sense Core Band also features a compact display that shows essential data such as steps, battery status, and heart rate.
Battery capacity differs between the two models. The Luna Core Bracelet houses a 26mAh battery, while the Sense Core Band includes an 18mAh battery. Each device is rated to deliver around 5 to 7 days of usage on a single charge, with standby extending up to 12 days for Luna Core and 10 days for Sense Core.
Inllie Luna Core Bracelet and Sense Core Band price and availability
Inllie smart bracelets
The Luna Core Bracelet is priced at $149, while the Sense Core Band is available for $109. The company is also offering a limited-time bundle where both devices can be purchased together with a $79 discount.
For more daily updates, please visit our News Section.
Honor has quietly introduced the Honor Play 11 Plus in China, where it is already listed on the brand’s official website and available for purchase. This mid-range 5G phone offers a balance of battery life and everyday performance by packing a large 7000mAh battery and a bright AMOLED display in a slim design. Here is a closer look at its specifications, features, and pricing.
Honor Play 11 Plus specifications and features
Honor Play 11 Plus
The Honor Play 11 Plus features a 6.6-inch AMOLED display with a resolution of 2600×1200 pixels, offering DCI-P3 color support and up to 6500 nits peak brightness. It also includes 3840Hz PWM dimming for eye comfort and aluminosilicate glass protection.
Powering the device is the Dimensity 6500 Elite chipset paired with 8GB RAM and 256GB storage. It packs a 7000mAh battery with support for fast wired charging and reverse charging. The phone runs MagicOS 10 based on Android 16 and brings several AI-driven features such as YOYO smart assistant, AI notes, translation tools, and system-level optimizations.
For photography, the phone includes a 50-megapixel rear camera with an f/1.8 aperture and support for up to 10x digital zoom. On the front, it has an 8-megapixel camera for selfies and video calls. It also supports 1080p video recording.
Honor Play 11 Plus
Other features include in-display fingerprint sensor, stereo speakers, IP66 rating, NFC, infrared remote, Bluetooth 6.0, and dual SIM 5G support. Despite packing a huge battery, it measures 7.34mm in thickness, with a weight of around 185 grams. To sum up, this phone appears to be a rebranded version of the Honor X80i, which debuted earlier this year in China.
Honor Play 11 Plus price and availability
The Honor Play 11 Plus is available in an 8GB + 256GB variant priced at 2,199 Yuan (~$320). It comes in Sunrise Gold and Lanyue Silver colour options, also referred to as Moon Embracing Silver in some listings. The device is already on sale in China via official channels.
For more daily updates, please visit our News Section.
At SID Display Week 2026 in the United States, Samsung showcased a range of next-generation display technologies that could redefine how smartphones are used in daily life. The highlight of the event was the shift from traditional screens to multi-functional displays that combine visuals, health tracking, and privacy features.
One of the most impressive innovations is the Sensor OLED display. This technology allows users to measure heart rate and even blood pressure simply by placing a finger on the screen. It works by using light emitted from the display, which reflects off the skin and is captured by built-in sensors. This removes the need for smartwatches or separate health devices, making smartphones more useful for quick health checks.
Samsung also introduced the Flex Chroma Pixel display, which focuses on brightness and color accuracy. It can reach up to 3,000 nits of brightness and covers 96% of the BT.2020 color range. The goal is to deliver richer colors while improving power efficiency, especially for future premium devices.
Another key feature is Flex Magic Pixel technology, designed for privacy. It limits viewing angles so sensitive content like messages or health data stays hidden from people nearby, without affecting the main viewing experience.
Samsung also showcased a stretchable Micro LED display aimed at automotive use, along with improvements in EL-QD display efficiency.
Overall, Samsung is pushing toward displays that do much more than just show content. Future smartphones could act as health monitoring tools, offer built-in privacy, and deliver better visual performance, all through a single screen.
Motorola officially unveiled the Motorola Razr Fold, its first-ever book-style foldable, at MWC 2026. The device is now gradually making its way to different markets. While it has already landed in Europe, it is making its way to China this month. Now, a new development reveals that it is also heading to India in the coming days.
Motorola Razr Fold teaser page
The landing page for the Motorola Razr Fold has gone live in India, indicating that the launch may not be far away. The page states “coming soon” suggesting that t The page includes a notify option, allowing users to register interest ahead of the official launch.
Motorola Razr Fold specs, price
The specifications of the Motorola Razr Fold are already known, as the device has debuted globally. It features a 6.6-inch pOLED outer display with a 2520 x 1080 resolution, 165Hz refresh rate, and peak brightness of up to 6000 nits, protected by Gorilla Glass Ceramic 3. The inner display measures 8.1 inches with an LTPO panel, 2484 x 2232 resolution, 120Hz refresh rate, and up to 6200 nits brightness, along with UTG protection.
The device is powered by the Snapdragon 8 Gen 5 chipset, paired with 16GB LPDDR5X RAM and up to 1TB storage. It houses a 6000mAh silicon-carbon battery with support for 80W wired, 50W wireless, and 5W reverse wired charging.
For photography, the Razr Fold includes a 50-megapixel main camera with a Sony LYT-828 sensor and OIS, a 50-megapixel ultra-wide lens with a 122-degree field of view, and a 50-megapixel periscope telephoto camera offering 3x optical zoom with OIS. It also features a 32-megapixel front camera on the outer display and a 20-megapixel inner camera. The device supports 8K video recording along with Dolby Vision.
On the software front, it runs Android 16 and is promised to receive seven Android upgrades along with seven years of security updates. Additional features include Motorola Pen Ultra support and an IP48/49 rating for durability.
In Europe, the Motorola Razr Fold is priced in the premium segment, placing it alongside other flagship foldables. However, there is no information yet regarding its pricing in India. Once launched, it is expected to compete with upcoming foldable devices such as the Vivo X Fold 6 and the Samsung Galaxy Z Fold 8 in the Indian market.
For more daily updates, please visit our News Section.
For the past ten years, I have relied almost entirely on air conditioning to get through the summer. Where I live, temperatures regularly reach 45°C (113°F), and the heat can be difficult to manage.
However, running an AC unit all day comes with a significant downside: high electricity bills. This year, I decided to look for a more cost-effective way to cool my home during the daytime. I wanted to see if a modern desert cooler could do the job without using as much power.
To test this out, I received the Kenstar TALL BOY Honey Comb 105 Litre BLDC Desert Cooler (Model: KCLTBDBL105FRH) as a review unit. It retails for ₹15,990 ($168) and features a Brushless Direct Current (BLDC) motor, which is designed to be energy efficient.
After using it for a week, including during a particularly hot and humid stretch of weather, I have a clear understanding of how it performs, where it works well, and what its limitations are. Here is my experience using it as a daily cooling solution.
Design and Dimensions
The first thing you notice about the Kenstar Tall Boy is its height. It stands 1428 mm tall, which is about 4.7 feet. It is a large appliance that will be very noticeable in whatever room you place it in. However, the height serves a specific, practical purpose.
Many standard desert coolers are relatively short, meaning the air they blow often hits the side of a bed or the back of a chair. By elevating the 40.6 cm (16-inch) fan, the Tall Boy directs the airflow higher up. When I am sitting at my desk or lying in bed, the air reaches me directly rather than cooling the floor.
Despite being tall, the cooler’s footprint is fairly standard for its capacity, measuring 630 x 445 mm. It fits reasonably well into the corner of my dining room and doesn’t take up too much floor space on my balcony. The body is made from ABS and HIPS plastic. It feels sturdy enough for regular indoor and covered outdoor use, and it hasn’t shown any signs of strain.
When the cooler is empty, it weighs 18 kg, which is manageable to move. But this model has a 105-liter water tank. Once you fill it up, the total weight exceeds 120 kg. To handle this, Kenstar included four castor wheels at the base. I was initially concerned about moving it when full, but the wheels roll smoothly on flat floors. I can push it from the living room to the terrace without much effort, though you do have to be careful over door thresholds.
BLDC Motor and Power Consumption
This model comes with a BLDC motor. Traditional desert coolers of this size usually consume between 200 and 250 watts of electricity. The Kenstar Tall Boy is rated at 145 watts. While that might not sound like a massive difference on paper, it adds up over a month when you are running the cooler for 10 to 15 hours a day. It is a noticeable reduction in power consumption compared to older models.
This low wattage also provides a very practical benefit during power cuts. Because it draws only 145 watts, the cooler runs easily on my standard home inverter. In areas where the power grid can be unreliable during peak summer months, being able to keep your primary cooling appliance running on battery backup is highly convenient.
Kenstar says that the motor uses a double ball bearing system. In practice, this is meant to reduce internal friction, which should help the motor last longer and run a bit smoother. It comes with a five-year warranty on the motor, which provides some peace of mind regarding its durability.
Cooling Performance and Airflow
If you are transitioning from an air conditioner to a desert cooler, there is a learning curve. I made the mistake of setting the Tall Boy up in a closed bedroom on the first day. Desert coolers use evaporative cooling, which naturally adds moisture to the air. Because the room lacked ventilation, the humidity increased quickly, and the room just felt sticky and uncomfortable.
Once I realized my error, I moved the cooler to my dining area and opened a window to allow for cross-ventilation. The difference was immediate. In an open space, the cooler works effectively. The fan pushes out 4500 m³/h (cubic meters per hour) of air, and Kenstar claims an air throw of 50 feet.
While I didn’t measure the exact distance, it easily circulates air across my entire living space. The motorized louvers move side to side, helping to distribute the air evenly rather than blowing it in just one direction.
The cooling media consists of honeycomb pads on three sides. They hold water well, don’t sag, and provide consistent evaporation.
For particularly hot afternoons, the cooler has an ice chamber on top. You can add ice cubes to cool the water before it runs through the pads. It does lower the temperature of the air noticeably for a short period. Once the ice melts, it returns to standard evaporative cooling, which is still effective as long as you keep a window or door open.
Day-to-Day Use and Maintenance
Living with a 105-liter cooler is fairly straightforward. The large tank is very convenient; a full tank easily lasts me 12 to 15 hours of continuous use. I can fill it in the evening and run it through the night without worrying about the water running out. There is a clear water level indicator on the front, so you can check how much water is left at a glance.
The cooler includes a dust filter net on the outside of the cooling pads. This is a simple but useful feature. It catches larger dust particles, pet hair, and insects, stopping them from getting stuck in the honeycomb pads. This means the pads stay cleaner for longer, and the air smells fresher. Also, a quick heads-up for new buyers: if you have just bought it, you will likely notice a distinct smell for the first two days of use, but it eventually goes away completely.
The control panel is a modern touch interface that is intuitive and easy to use, and it also comes with a handy remote control. The touch panel works really well with absolutely no issues, housing all the necessary buttons including power, fan settings, cooling on or off, swing, and a timer. It offers seven different fan speeds, which is highly practical. You can keep it on a low setting for a gentle breeze or turn it up when you need to cool the room quickly.
There are a few drawbacks to keep in mind. First, moving this volume of air generates noise. On the lower settings, it is a manageable background hum. But on the highest fan speeds, it is quite loud. If you are watching TV or taking a phone call in the same room, you will likely need to turn the fan speed down.
Second, maintenance is required. If you live in an area with hard water, minerals will eventually build up on the honeycomb pads. You will need to periodically drain the tank and descale the pads to keep the cooler working efficiently. It isn’t a difficult process, but it is an extra chore you don’t have with an AC.
The Verdict
The Kenstar TALL BOY 105 Litre BLDC Desert Cooler is a practical and effective appliance, provided you use it in the right environment. It will not replace an air conditioner in a sealed room, and it won’t drop the room temperature to 18°C.
However, if you have a large, well-ventilated space, like a living room, a spacious bedroom with open windows, or a covered patio, it performs very well. The 4.7-foot height ensures the air reaches you where you are sitting, and the 105-liter tank minimizes the need for constant refilling.
At ₹15,990 ($168), the initial cost is reasonable, and the 145W BLDC motor helps keep ongoing electricity costs down. It is a sensible, energy-efficient alternative for managing the summer heat, especially if you need an appliance that can run on a home inverter during power outages.
Since the beginning of this month, Oppo has been teasing the arrival of the Find X9 Ultra in India, but is yet to confirm the launch date. Most likely, the company may unveil it after its rival brand Vivo introduces the Vivo X300 Ultra tomorrow in India. Ahead of the expected launch this month, Oppo has now shared key details about the camera capabilities of the Find X9 Ultra.
The Oppo Find X9 Ultra introduces a redesigned periscope camera system that aims to deliver 10x optical zoom without increasing module size. At its core is the Industry-first Quintuple Prism Reflection Periscope Structure, where light is redirected multiple times within a compact 29mm space before reaching the 50-megapixel sensor. This design extends the optical path, enabling an approximate 230mm focal length while keeping the device slim.
To maintain image quality across this complex setup, Oppo has developed a refined optical path system that reduces stray light and preserves clarity. The device also integrates sensor shift stabilisation, which physically moves the sensor to counter hand movements at higher zoom levels. This helps in capturing stable shots even at extended zoom ranges.
Find X9 Ultra – Triple Active Optical Alignment
The camera module is further refined through Triple Active Optical Alignment, a precision-based assembly process that ensures accurate positioning of the lens, prism, and sensor for consistent sharpness. The overall setup includes a 200-megapixel main camera with a Sony LYTIA 901 sensor, a 200-megapixel 3x telephoto lens for portraits and telemacro use, and a 50-megapixel ultra-wide camera. All lenses support 4K 60fps Dolby Vision recording, supported by an image engine focused on colour and detail refinement.
Oppo Find X9 Ultra launch date (rumored)
According to tipster Sanju Choudhary, the Oppo Find X9 Ultra and Find X9s could launch in India on May 15. Pricing is expected to be positioned above the Find X9 Pro, which is currently priced at Rs 1,09,999, with the Ultra variant likely to cost significantly more. The Find X9s, on the other hand, may start at around Rs 70,000.
For more daily updates, please visit our News Section.
Last year, Xiaomi launched the Xiaomi 15s Pro powered by its homegrown Xring O1 chip. There have been reports that the brand is now working on a successor version of the chip dubbed the Xring O3. Speculation suggests that the Xring O3 may debut as early as this year, possibly powering the upcoming Xiaomi 17 Fold (tentative name) foldable smartphone. Now, a new leak reveals that it may also power the next-generation Ultra-branded flagship phone.
Xiaomi’s mysterious Ultra flagship with Xring O3 in the works
Xiaomi 17 Ultra
Tipster Yogesh Brar suggests that Xiaomi is working on a new Ultra-branded smartphone powered by its in-house Xring O3 chipset. The report indicates that this device is being developed alongside the upcoming Xiaomi 18 Ultra, which is still expected later this year.
The new Xring O3-powered Ultra model is said to be a separate offering from the 18 Ultra, raising questions about its positioning within Xiaomi’s flagship lineup. It is also being suggested that this device may remain limited to China, with no plans for a global rollout at this stage.
What’s known about the Xring O3?
Reports have revealed that the Xring O3 will arrive with a simplified yet more powerful architecture. It is expected to shift to an octa-core design, moving away from the earlier 10-core layout. The new setup may include a Prime core clocked at up to 4.05GHz, Titanium cores at around 3.42GHz, and efficiency-focused little cores reaching 3.02GHz.
The GPU is also tipped to improve, nearing 1.5GHz frequencies. Memory speeds may remain unchanged at 9600 MT/s. Overall, these changes are likely aimed at improving multitasking, background processing, and sustained performance efficiency across demanding workloads.
For more daily updates, please visit our News Section.
Samsung has quietly increased prices for a bunch of its budget and mid-range Galaxy phones in India, and this is not the first time this year. The latest revision, which took effect in early May 2026, marks the sixth price hike so far in 2026.
This time, the increase hits models across the M and F series, including the Galaxy F06, F36, F70e, M06, M17e, M17, and M36. Based on updated listings on Samsung’s official website, most variants have gone up by a flat ₹1,000.
The change was first pointed out by tipster Abhishek Yadav on X, who shared what looks like internal communication sent to retailers.
For the more affordable models like the Galaxy F06 and M06, prices now start at ₹12,499 for the 4GB/64GB variant, going up to ₹15,999 for the 6GB/128GB version. For context, the 4GB/128GB version of the Galaxy F06 was priced at ₹9,999 at launch and now stands at ₹13,999.
The F36 and M36 series now sit between ₹21,999 and ₹27,999 depending on the configuration. Mid-tier options like the F70e and M17e have also seen a similar ₹1,000 bump across variants, while the Galaxy M17 lineup now starts at ₹16,999 and goes up to ₹20,999.
Samsung has not officially explained the reason behind the repeated increases, but the broader industry trend gives some context. Component prices, especially memory and storage, have been climbing due to demand from AI infrastructure and data centers, and that shift seems to be trickling down to consumer devices.
What stands out is how frequent these adjustments have been. Samsung has been revising prices almost every month this year, and while ₹1,000 might not sound like much to some buyers, it starts to add up over multiple hikes.
Seasonal sales on platforms like Amazon and Flipkart could offset some of the increase, depending on discounts and exchange offers. So the actual street price may still look reasonable in some cases. Still, if this trend continues, these phones are slowly drifting away from their original “budget” positioning.
Previous reports suggested that OpenAI was exploring hardware such as AI-focused earbuds and possibly a phone developed with partners like MediaTek and Qualcomm. Now, analyst Ming-Chi Kuo has shared deeper insights into a dedicated AI agent smartphone, including timelines, specifications, and the broader strategy behind it.
OpenAI’s AI agent smartphone vision takes shape
According to Kuo, OpenAI may accelerate development of its first smartphone, targeting mass production as early as the first half of 2027. MediaTek is currently the leading candidate to supply the processor, which is expected to be a customised chip based on the MediaTek Dimensity 9600 and manufactured using TSMC’s N2P process in the second half of 2026.
The hardware is said to focus heavily on AI-driven tasks, with a dual NPU architecture designed for layered computing. Memory and storage could also see upgrades with LPDDR6 RAM and UFS 5.0, aiming to reduce bottlenecks when handling continuous AI workloads. For imaging, an enhanced ISP is expected to improve high dynamic range output, which could help the device better interpret real-world environments visually.
Kuo suggests that the device may rethink how users interact with smartphones. Instead of relying on multiple apps, the focus could shift to AI agents that handle tasks directly based on user intent. This approach may require deep integration between hardware and software, allowing OpenAI to control the entire experience without platform-level restrictions seen on existing ecosystems.
The phone is also expected to continuously process user context, which includes behaviour and usage patterns, making on-device efficiency critical. Simpler tasks could be handled locally, while more demanding processes may be executed through cloud-based AI systems.
Security features such as pKVM and inline hashing are also expected to be part of the system design. If development stays on track, shipments could reach around 30 million units across 2027 and 2028 combined.
For more daily updates, please visit our News Section.
Motorola has launched two different versions of the Edge 70 Pro for India and global markets. Now, the brand is working on a new model called the Edge 70 Pro+ for the Indian market. According to reliable tipster Mukul Sharma, this phone is scheduled to launch by the end of this month. Ahead of the launch, he has revealed that the device will offer three major upgrades over the existing Edge 70 Pro.
Motorola Edge 70 Pro+: Key features revealed
Motorola Edge 70 Pro+
The leak reveals that the Motorola Edge 70 Pro+ will feature a telephoto lens, support wireless charging, and offer a 16GB RAM variant. Additionally, it will be available in three shades, as shown in the image. The extreme left one is dubbed Satin Wine Red, and there is also a wood finish variant.
While the other specifications of the phone are under wraps, they are likely to be identical to the regular Edge 70 Pro. It appears that the global version of the Edge 70 Pro, which includes all the above-mentioned specifications, will be called the Edge 70 Pro+ in the Indian market.
The Edge 70 Pro is priced at Rs 38,999 (~$410) in the Indian market. Therefore, the Edge 70 Pro+ with its distinguishing features may carry a sub-Rs 50,000 price tag.
The Edge 70 Pro+ may feature a 6.8-inch AMOLED panel offering a 1.5K resolution, a 144Hz refresh rate, and 5200 nits of peak brightness. Under the hood, it could be equipped with the Dimensity 8500 Extreme chip and a 6,500mAh battery with 90W wired and 15W wireless charging.
The Edge 70 Pro+ could be equipped with a 50-megapixel front camera and a 50-megapixel (main) + 50-megapixel (ultra-wide) + 50-megapixel (3.5x periscope) triple camera setup. The device will run on Hello UX-based Android 16 and is expected to receive three major Android updates.
For more daily updates, please visit our News Section.
Casio recently added two new digital watches to its US lineup: the AE1600HX-1BV and the AE1600HX-3AV. Both models are priced at $45.95. If they look familiar, it is because they were already listed on Casio’s international and European websites last month, but they are now officially available for US buyers.
Design Details
The main difference between these new “HX” models and the standard AE-1600H series is the strap length. Standard Casio resin bands usually fit wrist sizes up to 215mm. These new models come with an extra-long rally-style strap that accommodates wrists from 145mm up to 235mm.
It is a practical change for people who usually find standard watch bands too tight. The longer band is also useful if you need to wear the watch over a jacket or long sleeves while working or spending time outdoors. The strap uses a double-hole design, which helps keep the watch secure on the wrist.
As for the design, both watches have a large resin case measuring 54.1 by 49.7mm, and they are 15.9mm thick. Despite the bulky size, they only weigh 55 grams. The AE1600HX-1BV is the black model. It uses a negative LCD, meaning the screen background is dark while the numbers are light, and has small light blue text on the case.
The AE1600HX-3AV comes in a dark olive color with a standard LCD screen and lime yellow text. Both versions have a large button on the front of the case that turns on an amber LED backlight, making it easy to check the time in the dark.
Internally, these watches offer the standard set of features you would expect from an affordable Casio. They are powered by a CR2032 coin battery that is rated to last for about 10 years. They also have 100-meter (10-bar) water resistance, meaning you can swim or wash your hands with them without an issue.
The software includes basic daily tools: a dual time function, a 1/100-second stopwatch, a 24-hour countdown timer, and five alarms (including one snooze option). The digital calendar is fully automatic up to the year 2099.
The Fairphone 3 has reached an important milestone, marking the end of its official software support cycle. While the journey is coming to a close, it also highlights how long a smartphone can realistically last.
Seven years of support and design evolution
Fairphone 3
Launched in 2019 with a promise of five years of updates, the Fairphone 3 has now completed seven years of support, extending well beyond its original target. The final software update is expected to roll out by June 2026, with support ending in August. This extended lifecycle stands out in a market where most smartphones receive significantly shorter update timelines.
The device also marked a shift in design for the brand. It introduced a more refined and modular build compared to earlier models, making repairs easier and improving accessibility of spare parts. Over time, updates such as the Fairphone 3+ brought improvements in camera modules and audio, while maintaining compatibility with existing hardware.
Beyond hardware, the Fairphone 3 played a role in Fairphone’s broader sustainability initiatives. It was the first device linked to the company’s living wage program, which has contributed over $1.25 USD to supply chain workers since its introduction. The phone also supported reuse initiatives, where components like displays, motherboards, and speaker modules were refurbished and made available again.
Even as official support ends, the device is expected to remain functional through alternative operating systems. Platforms such as LineageOS, /e/OS, and postmarketOS continue to offer updates, extending the usability of the hardware further. Fairphone has also shared development work to support these communities, encouraging longer device lifespans.
For more daily updates, please visit our News Section.
Samsung has expanded its removable storage portfolio in India with the introduction of the T7 and T9 microSD cards. The new lineup signals a shift in branding while addressing growing demand for faster and higher-capacity storage. Here are all the technical details about the new microSD cards from Samsung.
Samsung T7, T9 microSD card key specifications
Samsung T7 and T9 microSD cards
The T7 microSD card is positioned for everyday users looking to expand storage across smartphones, tablets, laptops, and gaming devices. It offers capacities ranging from 128GB to 1TB, with read speeds of up to 170MB/s. This makes it suitable for regular file transfers, media storage, and casual gaming needs without noticeable slowdowns.
The T9 microSD card is aimed at users who handle larger files and need quicker access speeds. With read speeds reaching up to 200MB/s and write speeds up to 130MB/s, it supports demanding tasks such as high-resolution video recording and fast data transfers. It also includes a six-layer protection system designed to safeguard data in varied environments, including use in drones and action cameras.
Samsung is also introducing a simplified naming approach with this launch. The new T series replaces earlier options such as EVO Plus and PRO variants, aligning removable storage with its existing portable SSD naming. The idea is to make it easier for buyers to understand performance tiers while maintaining consistency across categories.
Samsung T7, T9 microSD card: Price and availability
In terms of pricing, the T7 microSD card starts at Rs 4,849 (~$50) for the 128GB variant, going up to Rs 30,399 (~$320) for the 1TB model. The T9 range begins at Rs 5,989 (~$65) for 128GB and reaches Rs 18,999 (~$200) for the 512GB option. Both series will be available in India from the first week of May 2026 through online and offline channels.
For more daily updates, please visit our News Section.
The upcoming Samsung Galaxy Z Flip 8 has surfaced in fresh leaks, pointing towards a refined design rather than a major overhaul. Early details suggest Samsung is focusing on improving the overall experience while keeping core hardware familiar.
Focus shifts to hinge and display refinement
Samsung Galaxy Z Flip 7
According to a tipster on Naver, Samsung may introduce a redesigned hinge mechanism aimed at reducing the visible crease on the Galaxy Z Flip 8’s inner folding display. The improvement could make the screen appear nearly flat when unfolded, addressing one of the most noticeable aspects of flip-style foldables.
The same hinge change is also expected to slightly alter the device’s dimensions. Reports indicate the phone could be marginally wider while becoming around 0.5mm thinner when folded. The weight is also tipped to drop to about 180 grams, compared to roughly 188 grams on the Samsung Galaxy Z Flip 7, making it easier to handle over long periods.
While the design may see subtle refinements, the internal hardware is expected to remain largely unchanged. The device is likely to feature a 4,300mAh battery paired with 25W wired charging, similar to the previous generation. Other elements such as speakers, vibration motor, and cover display are also tipped to carry forward without major upgrades.
Camera specifications could include a 50-megapixel primary sensor and a 12-megapixel ultra-wide lens, along with a 10-megapixel front camera placed on the inner display. The handset is also expected to run on Samsung’s upcoming 2nm Exynos 2600 chipset, aligning with the brand’s approach for its flip series.
The Galaxy Z Flip 8 is expected to debut alongside other foldables at a Galaxy Unpacked event rumoured for July 22 in London. Pricing may see a slight increase due to rising component costs, although exact figures are yet to be confirmed.
For more daily updates, please visit our News Section.
Working on a single laptop screen can be frustrating when you need to view multiple documents or applications at the same time. Portable monitors are a standard fix for this, and Asus has just added another option to the mix. The ZenScreen OLED MQ16FC is a 16-inch secondary display aimed at people who work away from a desk, and it is priced at €280 in Europe.
Asus ZenScreen OLED MQ16FC Specifications
The monitor uses an OLED panel with a 1920 x 1200 resolution. That gives it a 16:10 aspect ratio, which matches most modern productivity laptops and provides a little more vertical space for reading text or viewing spreadsheets. The screen covers 95% of the DCI-P3 color space and has a Delta E < 2 color accuracy rating.
In practical terms, the colors and contrast should be reliable enough for standard photo and video editing tasks. It is a 60Hz display, so it is meant for work and watching media rather than gaming, though the 1ms response time should keep text scrolling looking normal.
The most useful hardware addition is the power pass-through system. The monitor includes two USB-C ports (which support DisplayPort Alt Mode) and a mini-HDMI port.
If you plug a compatible USB-C charger into the monitor, it can pass up to 65W of power directly to your connected laptop. This is helpful if you are working in a cafe or an airport and only have access to a single wall outlet, as you can keep both devices powered using one charging brick.
Physically, the monitor is built to fit in a standard laptop bag. It weighs 0.68 kg and is 0.9 cm thick. It includes a built-in kickstand, a standard 1/4-inch tripod socket if you prefer to mount it, and software that automatically rotates the screen if you turn it vertically.
Asus also included a specific color profile intended to match the screen output of Apple’s MacBooks, which might save macOS users some time adjusting settings to get their screens to match.
BenQ has introduced the Mobiuz EX271QZ in India, bringing a new focus on blending ultra-fast gaming performance with accurate visual storytelling. The monitor targets gamers who want both responsiveness and immersive visuals.
BenQ Mobiuz EX271QZ: A new direction for gaming displays
BenQ Mobiuz EX271QZ gaming monitor
The Mobiuz EX271QZ features a 27-inch QHD QD-OLED panel paired with a 500Hz refresh rate and 0.03ms response time. This combination improves motion clarity during fast gameplay while keeping transitions smooth in open-world titles and cinematic sequences. The higher refresh rate also helps reduce blur and enhances tracking precision in competitive scenarios.
What sets this monitor apart is its approach to color tuning. Instead of generic presets, it introduces Game Art Color profiles such as Fantasy, Sci-Fi, and Realistic modes. These are designed to align with a game’s artistic style rather than simply boosting colors. Supporting this is Spectral Color Refinement, which adjusts colours across the full spectrum to deliver balanced tones, improved midtones, and more natural highlights.
The QD-OLED panel enables precise lighting control at the pixel level, delivering deep blacks and high contrast. The monitor carries VESA DisplayHDR True Black 500 certification, covers 99 percent DCI-P3 colour space, and can reach up to 1000 nits peak brightness in HDR content. These elements together improve depth and realism in both games and media playback.
It also integrates High Pixel Contrast technology that dynamically enhances shadow detail without affecting brighter areas. For connectivity, HDMI 2.1 with eARC support allows compatibility with modern consoles and multi-channel audio formats like Dolby Atmos and DTS:X. To maintain performance over time, the EX271QZ includes several OLED protection mechanisms such as pixel refresh, logo dimming, pixel shift, and graphene-based cooling.
BenQ Mobiuz EX271QZ price in India, availability
The monitor is priced at Rs 84,998 and is available via online and retail platforms across India.
For more daily updates, please visit our News Section.
The market for OLED gaming monitors has been steadily growing, and Lenovo is adding a new model to the list. Through its Lecoo sub-brand, the company recently launched the W3259PS in China.
It is a 31.5-inch display that includes the standard features expected from a current high-end desktop monitor: a 4K UHD resolution, a 240Hz refresh rate, and a QD-OLED panel, priced at 5,499 Yuan (roughly $805).
Lenovo Lecoo W3259PS Specifications
The primary feature of the monitor is its QD-OLED panel. Because OLED uses self-emissive pixels, the display controls brightness and color at the individual pixel level. This results in the deep blacks and high contrast ratios typical of OLED technology. Lenovo also applied an anti-reflective (AR) coating to the screen to help reduce glare in brighter rooms. The panel has a peak brightness of 450 nits, which is standard for desktop OLEDs in this category.
For gaming, the W3259PS comes with a 240Hz refresh rate paired with a 0.03ms gray-to-gray response time, which helps reduce motion blur and ghosting in fast-moving scenes. It supports Adaptive Sync to prevent screen tearing and includes standard software features like on-screen crosshairs and preset picture modes for FPS and RTS games.
The monitor is also suitable for general content creation. The 10-bit panel supports 1.07 billion colors, covering 99% of the DCI-P3 color gamut and 100% of sRGB. It is factory-calibrated with an average Delta E of less than 2, meaning the color accuracy should be reliable out of the box. To help with eye strain during longer sessions, the display incorporates a flicker-free design and hardware-level low blue light technology.
The port selection covers the basics for modern setups. It includes one DisplayPort, two HDMI ports, and a USB-C port that provides up to 90W of power delivery. The 90W output is useful for people who want to connect and charge a work laptop using a single cable. The monitor also supports Picture-in-Picture (PIP) and Picture-by-Picture (PBP) modes, allowing you to view two input sources at the same time.
Physically, the monitor comes with an adjustable stand that supports height, tilt, swivel, and pivot changes. If you prefer to use a third-party monitor arm, the back of the display supports a 75 x 75mm VESA mount.
For more daily updates, please visit our News Section.
Oppo has confirmed that the Find X9 Ultra and the more compact Find X9s are headed to India soon, bringing its latest flagship lineup to the market not long after their global debut. The move is notable, as Oppo is keeping the India rollout closely in sync this time instead of delaying availability by a few months.
The Find X9 series, which launched globally in late April, leans heavily into camera performance through Oppo’s continued partnership with Hasselblad. The Ultra model is clearly the centerpiece here.
The Find X9 Ultra comes with a quad-camera setup, including two 200MP sensors: one for the main camera and another for 3x telephoto. There is also a 50MP ultra-wide and a 50MP periscope telephoto offering up to 10x optical zoom, with digital zoom going much further. Oppo has also added extras like a multispectral sensor aimed at delivering more consistent color and detail.
Up front, there is a 50MP selfie camera, while the rest of the hardware stays firmly in flagship territory. The phone runs on the Snapdragon 8 Elite Gen 5, paired with 12GB or 16GB RAM and 256GB-1TB of fast UFS 4.1 storage. In the front, it packs a 6.82-inch LTPO AMOLED display with a 144Hz refresh rate. Battery capacity is on the higher side as well, with a 7,050mAh unit supporting 100W wired and 50W wireless charging.
The Find X9s is positioned as the smaller alternative. It features a 6.59-inch display and a triple 50MP camera setup, still tuned by Hasselblad. It is powered by the Dimensity 9500s and comes with a similarly large 7,025mAh battery, though charging is slightly lower at 80W.
Pricing has not been officially announced yet, but early expectations place the Ultra in the premium range, while the X9s should land closer to the upper mid-range segment. With the launch expected to be just weeks away, more details on pricing and availability should follow soon.
The Xiaomi Smart Band 10 Pro has barely had time to build up any real rumor cycle, and it is already popping up in retail listings. Brazilian store Magazine Luiza has listed the device ahead of any official announcement, which usually means a launch is not too far away.
The listing shows the fitness band in black, silver, and pink. That lines up with an earlier tip from Digital Chat Station, who mentioned a May 2026 launch and a wider set of colors, including white, orange, and a white ceramic version. If previous Xiaomi launches are anything to go by, some of those finishes could stay limited to China.
On the specs side, things look fairly familiar. The band is expected to keep the same 1.74-inch AMOLED display as the Band 9 Pro, and the battery is listed at 380mAh. Battery life is claimed to go up to 25 days, which would be a small but useful bump over the 21 days on the previous model. Support for both Android and iOS is expected to remain unchanged.
The ceramic version is still the most interesting part. The standard model is said to stay under 40 grams, while the ceramic variant goes past 50 grams. That is a noticeable jump, but it likely comes down to the material rather than a bigger device. For reference, the Band 9 Pro with its aluminum frame weighs under 25 grams without the strap, so this would be a clear shift in feel.
Pricing is where things get a bit messy. The Brazilian listing shows a range between BRL 734 and BRL 849, which roughly converts to $149 to $170. That seems unusually high for this category, especially considering the Band 9 Pro can often be found for around $90. Other estimates suggest the actual global pricing could land closer to the $100 mark, which feels more in line with Xiaomi’s usual positioning.
One thing that does add a bit of credibility is certification. A model number matching the expected naming scheme for the Band 10 Pro showed up in South Korea’s NRRA certification database back in January, which suggests the device has been in development for a while.
XPPen Magic Note Pad has officially launched in India, perfect for students, professionals, and creators who want a paper-like digital writing experience. With a focus on note-taking, reading, and light productivity, this device blends the feel of traditional notebooks with modern Android features. It aims to stand out in a growing segment of smart writing tablets by offering eye comfort, precision stylus input, and built-in productivity tools.
Display and Writing Experience
The Magic Note Pad features a 10.95-inch X-Paper display designed to mimic real paper. The AG nano-etched surface reduces glare and reflections, making it comfortable for long reading or writing sessions. It supports 16.7 million colors, 400 nits brightness, and a smooth refresh rate for clear visuals.
A dedicated X-Paper Key lets users switch between three modes: Ink, Light, and Natural, depending on the task. Whether you’re sketching, taking notes, or reading documents, the screen adapts easily, making it versatile for everyday use.
Performance and Features
Running on Android 14, the device supports apps from the Google Play Store, giving it more flexibility than traditional e-note devices. It comes with 128GB of storage, which is enough for notes, PDFs, and apps.
The XPPen Notes app is built-in and offers features like handwriting-to-text conversion, PDF annotation, auto-save, and cloud syncing with Google Drive and OneDrive. The included X3 Pro Pencil 2 provides 16,384 pressure levels, ensuring accurate and smooth writing. It also supports magnetic attachment and shortcut keys for better productivity.
For remote work, the tablet includes a 13MP front camera, dual speakers, and microphones, making it suitable for video calls and online meetings.
Battery and Design
The Magic Note Pad packs an 8000mAh battery with 20W fast charging, designed to last through a full day of usage. It is slim at 7mm and lightweight at 495g, making it easy to carry around.
The display is TÜV SÜD certified for low blue light, which helps reduce eye strain during long usage sessions.
Price and Discount Offer
XPPen Magic Note Pad is priced at Rs. 39,999, but it is currently available at a discounted price of Rs. 38,999. Buyers can get an additional 5% discount using the code GizmoXP, making it a more attractive deal for early adopters. Overall, the device positions itself as a strong option for users looking for a paper-like digital writing experience with modern smart features.
Buying a budget projector used to require a lot of compromises. For a long time, spending less than $300 meant dealing with dim images, clunky interfaces, and the need to plug in a separate streaming stick just to watch Netflix. But as we look at the market in May 2026, the baseline for entry-level projectors has noticeably improved.
Features that were once limited to more expensive models, like built-in adjustable stands, sealed optical engines to prevent dust buildup, and officially licensed smart TV software, are now standard in this price range. If you are looking for a simple way to watch movies on your ceiling or set up a casual outdoor movie night, here are the most practical budget projectors available right now.
TCL Projector C1
TCL is well-known for its budget televisions, and the C1 applies that same approach to projectors. For $250, it provides a native 1080p resolution and runs on official Google TV, which includes native support for Netflix.
The most useful physical feature is its 285-degree adjustable gimbal, which lets you easily point the image at a wall or ceiling without needing to prop the device up on books. At 230 ISO Lumens, it is not particularly bright, so you will need a dark room for the best picture.
However, it includes a fully sealed optical engine to keep dust off the internal lens and a decent 8W built-in speaker, making it a reliable, low-maintenance option.
Price: $249.99
Anker Soundcore Nebula P1i
Anker’s Nebula series has been a staple in portable projectors for a while. The P1i sits right at the edge of the $300 budget and focuses heavily on audio flexibility.
It features dual 10W speakers that can physically rotate 90 degrees horizontally or 200 degrees vertically, allowing you to aim the sound toward your seating area regardless of how the projector is positioned.
It outputs 380 ANSI lumens, which gives it a slight edge in brightness over the TCL, and it uses an all-glass lens. Like the C1, it runs Google TV and handles autofocus and keystone correction automatically. It’s a solid all-in-one unit if you want better built-in sound.
Price: $299
Aurzen Boom Mini
The Aurzen Boom Mini has a retail price of $349.99, but it is frequently discounted to around $245. If you can buy it at the lower price, it offers the highest brightness on this list at 500 ANSI lumens. This makes it a bit more forgiving if you have a small amount of ambient light in your room.
It includes a 110-degree adjustable stand, Google TV, and dual 10W speakers. The trade-off for the brighter lamp and larger speakers is that the unit is a bit bulkier than its competitors, but it’s a fair compromise if you prioritize a brighter image.
Price: ~$245 (with standard discounts)
Dangbei N2 Mini
If your budget is strictly capped at $200, the Dangbei N2 Mini is a capable entry-level choice. To keep the price down, Dangbei uses a custom Linux operating system instead of Google TV. Fortunately, it still comes with official licenses for Netflix, Prime Video, and YouTube, which covers the basics for most users.
It features a 190-degree tilt stand, a sealed optical engine, and outputs 200 ISO lumens. It also runs quietly, operating under 27dB. It’s a straightforward, compact projector that works well for small spaces like dorm rooms.
Price: $199
JMGO N1S Nano
While the JMGO N1S Nano sits above the $300 threshold, it is worth mentioning if you have a little flexibility in your budget. At $399, you get a noticeable improvement in color accuracy. It covers 90% of the DCI-P3 color gamut and outputs 460 ISO lumens, resulting in a richer, more vibrant picture than the cheaper models.
It retains the convenience features found in the others, including a 127-degree gimbal stand, Google TV, and automatic image adjustment, all packed into a lightweight 3.9-pound frame. It is a sensible step up if you want better visual fidelity without moving into the $500+ price bracket.
Price: $399
For more daily updates, please visit our News Section.
Reports have revealed that Xiaomi is gearing up to launch the Xiaomi 17T and 17T Pro for the global market. While the 15T series was unveiled in September, the 17T lineup is expected to debut much earlier, possibly as soon as this month. Ahead of the impending launch, Winfuture has published a report revealing the full specifications and official renders of the 17T duo.
Xiaomi 17T, 17T Pro specifications (rumored)
The Xiaomi 17T is expected to feature a 6.59-inch display with a resolution of 2756 x 1268 pixels and a 120Hz refresh rate. The 17T Pro may come with a larger 6.83-inch panel offering 2772 x 1280 resolution and a 144Hz refresh rate, indicating smoother visuals and improved responsiveness on the Pro model.
In terms of performance, the standard model could be powered by the MediaTek Dimensity 8500 Ultra chipset, while the Pro variant may feature the Dimensity 9500vv. Both phones are likely to include 12GB RAM with storage options of 256GB and 512GB. The Xiaomi 17T is said to house a 6500mAh battery with 67W charging support, while the 17T Pro could pack a 7000mAh battery with 100W wired charging and up to 50W wireless charging.
For cameras, both devices are expected to feature a triple rear setup with a 50-megapixel primary sensor, a 50-megapixel telephoto lens offering 5x optical zoom, and a 12-megapixel ultra-wide camera. On the front, both models may include a 32-megapixel camera for selfies and video calls.
The Xiaomi 17T is likely to come with a plastic build, whereas the Pro variant may feature a metal frame. The design differences between the two are expected to be minimal, mainly in size and camera module detailing.
Xiaomi 17T, 17T Pro price (rumored)
The Xiaomi 17T is tipped to start at 749 euros (~$935) for the 12GB+256GB variant, while the Xiaomi 17T Pro could be priced at 999 euros (~$1,170) for the 12GB+512GB model. Both devices are expected to be available in black, with the Xiaomi 17T also likely to come in light blue and pink finishes, while the 17T Pro will have dark blue and dark pink shades.
For more daily updates, please visit our News Section.
The Dimensity 9500 is MediaTek’s most powerful smartphone chipset right now, with performance and efficiency going toe-to-toe with Qualcomm’s Snapdragon 8 Elite Gen 5 SoC, but at a lower price point.
If you’re in for a high-end upgrade with strong hardware and long-term software support, these are the top five Dimensity 9500-powered smartphones to watch in 2026.
The Vivo X300 Pro offers excellent rear cameras. The triple camera setup includes a 50MP primary shooter, a 200MP periscope telephoto lens, and a 50MP ultrawide camera. The 50MP selfie camera takes great shots with excellent details.
The smartphone features a 6.78-inch LTPO AMOLED screen with a 120Hz refresh rate and 4500 nits of peak brightness. It supports HDR10+ and Dolby Vision. The device ships with Android 16 out of the box and promises up to five generations of OS upgrades, all the way up to Android 21.
The X300 Pro houses a 6,540mAh battery, but the EU markets get a slightly lower capacity at 5,440mAh. The charging capabilities remain the same across all markets: 90W wired fast charging and 40W wireless charging support. The Vivo phone also offers strong connectivity, featuring Wi-Fi 7, Bluetooth 5.4, NFC, and USB Type-C 3.2.
The Vivo X300 (review) is a compact flagship phone, featuring a 6.31-inch LTPO AMOLED screen. It supports a 120Hz refresh rate, HDR10+, HDR Vivid, and a peak brightness of 4500 nits.
The smartphone features a different camera setup than its Pro model. The triple camera setup includes a 200MP primary camera, a 50MP periscope telephoto lens, and a 50MP ultrawide camera. The selfie camera is still a 50MP snapper. The X300 also boots Android 16 out of the box and promises OS upgrades up to Android 21.
The Vivo X300 packs a 6,040mAh battery, with EU markets getting a slightly lower capacity of 5,360mAh. The charging speeds, though, match the Pro model, so you still get 90W wired charging and 40W wireless charging.
The Find X9 Pro (review) has a 6.78-inch LTPO AMOLED panel with a 120Hz refresh rate, HDR10+, HDR Vivid, and a peak brightness of 3600 nits. The display specs closely resemble the Vivo X300 Pro, and so do the camera specs, which include a 50MP primary camera, a 200MP periscope telephoto lens, and a 50MP ultrawide camera. The selfie camera is also a 50MP snapper.
The Oppo Find X9 Pro boots Android 16 and promises five major Android OS upgrades, up to Android 21. On the battery side, it houses a 7,500mAh battery with support for 80W wired charging and 50W wireless charging. Connectivity specs include Wi-Fi 7, Bluetooth 6.0, NFC, and USB Type-C 3.2.
The standard Find X9 (review) is a compact flagship phone featuring a 6.59-inch AMOLED screen with a 120Hz refresh rate, HDR10+, and 3600 nits of peak brightness. It boots Android 16 and promises OS upgrades up to Android 21.
The smartphone features three rear cameras, all with 50MP resolution. It includes a primary camera, a periscope telephoto lens with 3x optical zoom, and a 50MP ultrawide camera. The selfie camera has a lower resolution of 32MP.
Inside the device is a 7,025mAh battery with support for 80W wired and 50W wireless charging. On the connectivity side, the device supports Wi-Fi 7, Bluetooth 6.0, and NFC.
The Honor Magic 8 Pro Air (review) is currently exclusive to China. However, a global release is expected to follow soon, though an official confirmation is still awaited. The phone ships with a 6.31-inch LTPO OLED panel, featuring a 120Hz refresh rate, Dolby Vision, and 6000 nits of peak brightness.
The smartphone boots Android 16 OS with the MagicOS 10 skin on top of it. It features a triple camera setup on the back, comprising a 50MP primary shooter, a 64MP periscope telephoto lens, and a 50MP ultrawide camera. The front side has a 50MP selfie snapper.
The Magic 8 Pro Air houses a 5,500mAh battery with 80W wired and 50W wireless charging support. And its connectivity specs include Wi-Fi 7, Bluetooth 6.0, NFC, and USB Type-C 2.0.
Samsung appears to be preparing a subtle yet noticeable visual change for its next major software update. Early leaks around One UI 9 indicate that the company is refining how its media player looks and reacts during playback, hinting at a more immersive experience.
One UI 9 media player may get dynamic color integration
In One UI 9, Media Player seek bar changes its color as per the song
Information shared by tipsters Tarun Vats and Rajesh Rajput suggests that the media player in One UI 9 could feature colour-shifting elements. Instead of sticking to a fixed design, the playback bar and interface accents adapt based on the album art of the track being played. This creates a more responsive visual layer that changes in real time as users switch songs.
Screenshots indicate that this effect also extends to the Now Bar, where colours appear to blend with the overall interface. The shift is subtle but adds a sense of continuity between content and UI. The idea is to make the interface feel more connected to what the user is listening to, rather than remaining static.
In One UI 9, the media player seek bar dynamically changes color based on the album theme.
— Rajesh Rajput (Technobuzz) (@iRaj_r) May 2, 2026
This approach aligns with a broader trend where software interfaces adapt dynamically to content. By syncing colours with music, Samsung appears to be focusing on making everyday interactions feel more engaging without adding complexity to the user experience.
Work on One UI 9, which is expected to be based on Android 17, has already begun internally. Early builds were spotted running on the upcoming Samsung Galaxy S26 series as far back as March. Since then, more glimpses of the software have surfaced through leaked images and short clips.
The same source, Tarun Vats, has previously shared accurate timelines for earlier One UI releases and Galaxy launches, which adds credibility to this update. The redesigned media player is likely to debut with upcoming foldable devices such as the Samsung Galaxy Z Fold 8 and Samsung Galaxy Z Flip 8.
For more daily updates, please visit our News Section.
CMF has confirmed the India launch timeline for its next smartwatch, the CMF Watch 3 Pro. After earlier teasers, the company has now locked in a specific date, setting the stage for its arrival in the country. The specifications of the device are no secret since it was unveiled globally last year.
CMF Watch 3 Pro specifications and features
CMF Watch 3 Pro
The CMF Watch 3 Pro is scheduled to launch in India on May 6, following its earlier global debut. The smartwatch comes with a 1.43-inch circular AMOLED display featuring a 466 x 466 resolution, 60Hz refresh rate, and peak brightness of up to 670 nits with automatic adjustment. It features an aluminium alloy frame paired with a liquid silicone strap and carries an IP68 rating for dust and water resistance.
The device introduces a four-channel optical heart rate sensor, which is claimed to improve accuracy by over 10 percent compared to the previous generation. It also supports continuous SpO2 tracking, stress monitoring, sleep analysis with detailed insights, and women’s health tracking. With support for more than 130 sports modes and automatic workout detection, it aims to cover a wide range of fitness activities.
On the software side, the smartwatch includes AI-powered running guidance, personalized recovery insights, and workout summaries. Additional features include gesture controls, voice note transcription, real-time news updates, and integration with ChatGPT through the Nothing X app. The watch supports more than 120 watch faces and connects with both Android and iOS devices.
The CMF Watch 3 Pro packs a 350mAh battery, which is rated to last up to 13 days under typical usage. With heavier usage, it can last around 10 to 11 days, while enabling always-on display may reduce battery life to roughly 3.5 to 4.5 days.
CMF Watch 3 Pro price and availability
The CMF Watch 3 Pro will be available in India starting May 6 via Flipkart and select offline retail stores. Pricing has not been officially confirmed yet, but it is expected to be positioned under Rs 7,000 (~$75).
For more daily updates, please visit our News Section.
A new set of leaks has spilled the beans on what the Huawei Nova 16 series might look like. According to a post from tipster Fixed Focus Digital, the upcoming lineup could stick with some familiar colors.
The standard Nova 16 and Nova 16 Pro are said to arrive in classic black and white, along with a blue and a gradient finish. The top-end model, however, may skip the gradient look entirely with just black, white, and blue on its helm.
The top model is also where things get a bit more interesting. A newer leak suggests Huawei might call it the Huawei Pura Nova 16 Pro Max, instead of the previously expected “Ultra” branding.
Fortunately, a previous report gives us an idea of what this Ultra—or now Pro Max—model might offer.
Huawei Nova 16 Pro Max Possible Specifications
A previous report from tipster Digital Chat Station revealed a prototype device in the works with a 6.84-inch 1.5K LTPO display. It’s expected to be the top-tier model in the Nova 16 series, powered by a “9-series flagship processor,” which likely means a Kirin 9000-series chip, along with a battery that could land around 7000mAh.
As for the camera, the device is said to include a 50-megapixel main sensor in the 1/1.3-inch range, paired with a 50MP periscope telephoto lens and a multispectral sensor. Wireless charging is also reportedly part of the package.
For context, the Huawei Nova 15 series launched late last year with Kirin 8020 and 9010S chipsets, starting at 2699 yuan. The Ultra variant stood out mostly for its dual “red maple leaf” design, rather than major hardware changes.
Like most early leaks, none of this is final. Names, specs, and even the overall direction could change before Huawei makes anything official.
For more daily updates, please visit our News Section.
Last year, Xiaomi skipped launching a horizontal foldable smartphone, but recent reports suggest that it may introduce one this year. While it unveiled the Xiaomi Mix Flip 2 last year, there have been some reports that the Mix Flip 3 may not be unveiled this year. Now, a new update reveals that Xiaomi have discontinued the flip phone lineup
Xiaomi Mix Flip series may come to an end
Xiaomi Mix Flip seris discontinued, claims DCS
According to a post on Weibo, a user asked tipster Digital Chat Station whether Xiaomi plans to launch a new compact foldable phone this year and if it would bring upgrades over the Mix Flip 2. In response, the tipster suggested that Xiaomi has discontinued the Mix Flip series.
There is no official confirmation from Xiaomi yet, so the exact reason behind this move remains unclear. However, it is likely tied to market dynamics. Despite small foldables performing reasonably well globally, the segment remains niche and production costs are still high. Compared to larger foldables, compact flip devices may not offer the same value proposition.
Xiaomi MIX Flip 2
Xiaomi is not alone in slowing down its efforts in this category. There is also uncertainty around whether Honor will launch a successor to its flip phone lineup after the Honor V Flip 2. Similarly, Vivo introduced the X Flip as its first flip device, and Oppo launched the Find N3 Flip in 2023, but neither brand has followed up with new flip models since then.
On the other hand, Motorola continues to remain active and dominate in the segment. The brand recently launched multiple flip devices, including the Razr 70, Razr 70+, and Razr 70 Ultra, expanding its presence instead of scaling back.
Coming back to Xiaomi, its upcoming horizontal foldable smartphone is expected to feature the in-house Xring O3 chip. The device is likely to launch around July or August, although its final branding remains uncertain. It could arrive as the Mix Fold 6 or possibly under a new naming scheme such as the Xiaomi 17 Fold.
For more daily updates, please visit our News Section.
Samsung’s security update rollout, which had lagged in the last couple of months, is finally getting back on track. The April 2026 security patch started rolling out to the Galaxy S26 series on the very first day of April, and it has gradually expanded to over a dozen Galaxy devices since.
Here’s a list of Galaxy devices that have started receiving the April 2026 security update:
Galaxy S series
Galaxy S26, S26+, S26 Ultra
Galaxy S25, S25+, S25 Ultra, S25 Edge, S25 FE
Galaxy S24, S24+, S24 Ultra, S24 FE
Galaxy S23, S23+, S23 Ultra, S23 FE
Galaxy Z series
Galaxy Z TriFold
Galaxy Z Fold 7, Z Flip 7, Z Flip 7 FE
Galaxy Z Fold Special Edition
Galaxy Z Fold 6, Z Flip 6
Galaxy Z Fold 5, Z Flip 5
Galaxy Z Fold 4, Z Flip 4
Galaxy A series
Galaxy A57, A56, A55, A54, A53
Galaxy A37, A36, A35, A34
Galaxy A26, A25
Galaxy A16, A15
Galaxy A07, A07 4G
Galaxy M series
Galaxy M54
Galaxy M16
Galaxy Tab series
Galaxy Tab S10+, Tab S10 Ultra
Galaxy Tab A11+
Galaxy XCover series
Galaxy XCover 7, XCover 7 Pro
Galaxy XCover 6 Pro
Samsung releases software updates in batches, so even if your device is on the list, it may take a few days before the update shows up. You can manually check for updates by navigating to Settings > Software updates > Download and install.
The April 2026 security patch, like any other, fixes vulnerabilities found in the previous software version. It doesn’t include new features or visual upgrades, but it strengthens security to keep the device safe from critical security flaws.
The April security patch, in particular, addresses 47 vulnerabilities in total. Of these, 33 come from Google as part of the Android Security Bulletin for April 2026, 10 from Samsung Mobile, and the remaining 4 from Samsung Semiconductor. Some of those Samsung-specific patches are related to Device Care and DeX.
There are still many more Galaxy devices in line to receive the latest security update. The rollout should gradually cover them over the coming days and weeks. We’ll update the list periodically to ensure it remains fresh. You can revisit the page later for the latest information.
While the security update rollout is back on track after being delayed in February and March, Samsung is still struggling with One UI 8.5. The company hasn’t begun rolling out the update despite a really long beta program. Hopefully, the wait will be over soon. You can check the One UI 8.5 eligible devices list here.
We’ll update you with the latest developments in our Samsung section. You can visit the page from time to time to stay updated. Or, join our Telegram channel to get instant updates.
A recent report hinted that Xiaomi could bring back the Mix lineup with the Mix 5. The claim was based on internal database entries referencing a device codenamed “hongkong” with the model number Q5.
This detail led to speculation around a 2026 release window and a possible continuation of Xiaomi’s Mix branding, which has historically been tied to more experimental hardware.
However, a reliable Chinese tipster, Digital Chat Station, has refuted the claims, stating that there is no such product as the Mix 5 in development. According to the tipster, the Q5 model number isn’t tied to a Mix device at all, but rather to Xiaomi’s next-generation flagship, likely part of the Xiaomi 18 series.
What was rumored
The previous leak about the supposed Mix 5 hinted at an under-display camera similar to the one seen on the Xiaomi Mix 4. It was also expected to feature experimental ideas, such as a magnetic lens system for the rear camera. Xiaomi had previously teased such an accessory in 2025, and reports suggested it could be nearing mass production.
Xiaomi 18 Pro render
The rumored hardware also included Qualcomm’s next flagship chip, the Snapdragon 8 Elite Gen 6 Pro, along with HyperOS 4 out of the box. There were even hints at a broader global release, something the Mix lineup has typically avoided.
Now that the rumor has been refuted, these experimental ideas seem more likely to be reserved for the Xiaomi 18 series.
Separate leaks around that lineup describe a compact flagship with a next-generation 2nm chipset, possibly the standard Snapdragon 8 Elite Gen 6, along with dual 200-megapixel cameras and a battery capacity of around 7,000mAh. Xiaomi is also said to be working on a slimmer design with ultra-narrow bezels using LIPO packaging.
For more daily updates, please visit our News Section.
AnTuTu’s latest Android performance rankings for April are in, and not much has changed from last month. The same phones are at the top with iQOO still leading the pack with iQOO 15 Ultra.
The iQOO 15 Ultra is the best performing phone for April with a score of 4,126,940. Close behind is the iQOO 15 with 4,102,621. Both devices rely on Qualcomm’s Snapdragon 8 Elite Gen 5 chip with 16GB RAM and 1TB storage, and are tuned aggressively for performance with a good thermal management.
Right behind them is the Red Magic 11 Pro+, scoring 4,098,742. It uses the Snapdragon 8 Elite Gen 5 too, but has 24GB RAM paired with 1TB storage.
What stands out more broadly is the chipset split. Out of the top ten Android phones this month, nine are powered by the Snapdragon 8 Ultra Gen5. The only exception is the OnePlus Ace 6 Ultra, which uses MediaTek’s Dimensity 9500 and ranks sixth in the chart.
Compared to March, the overall structure hasn’t changed dramatically. The iQOO 15 Ultra was already in first place then, even posting a slightly higher score of 4,174,911. Devices like the Red Magic 11 Pro+ and iQOO 15 were also present in the upper tier, though their positions have adjusted slightly.
AnTuTu mid-range phones and tablets ranking for April
The mid-range, or what AnTuTu classifies as “sub-flagship,” tells a different story. Here, MediaTek has a stronger foothold. The iQOO Z11 leads this category with 2,323,047 points, powered by the Dimensity 8500. It’s followed by the Honor Power2 and Oppo K15 Pro, both also running on Dimensity chips.
On the tablet side, performance is increasingly mirroring flagship phones. The Vivo Pad 6 Pro takes the top spot with a score of 4,095,813. It’s followed by the Legion Tablet Y700 5th Generation and the Oppo Pad 5 Pro. All three use the flagship Snapdragon 8 Elite Gen 5 chip.
Looking back at March, the tablet category has seen a small shift at the top, with Lenovo’s Legion tablet previously holding first place. Now, Vivo has moved ahead, though the overall performance range remains largely similar.
It has not been that long since the OnePlus Ace 6 launched, but early details about its successor are already starting to show up. The Ace 6, which arrived in October 2025, set a pretty high bar with features like a 165Hz display, Snapdragon 8 Elite chip, IP69K rating, and a surprisingly large 7,800mAh battery.
Now, attention is shifting to the OnePlus Ace 7. According to Weibo tipster Smart Pikachu, the phone could use the Snapdragon 8 Elite Gen 5, the successor to the Snapdragon 8 Elite used in the Ace 6. It may also feature an active cooling system, which even the recently launched Ace 6 Ultra lacks. If that holds true, the Ace 7 should offer noticeably better sustained gaming performance compared to both the Ace 6 and possibly even the Ace 6 Ultra.
There is also talk of an “ultra-high refresh rate” display. No exact number yet, but expectations are clearly going up. Some recent leaks even suggest future OnePlus flagships could push toward 240Hz panels, so it will be interesting to see where the Ace 7 lands.
The Ace series has usually been about offering strong performance at a relatively aggressive price, and that does not seem to be changing. If anything, OnePlus looks like it is trying to push it a bit further this time with better cooling and possibly a faster display.
As of now, a lot of the details are still up in the air. Things like battery size, camera hardware, and final design have not really been locked in publicly. But if even half of these leaks hold up, the Ace 7 could end up being one of the more interesting performance-focused phones in its segment when it arrives.
This month, Oppo will unveil the Reno 16 series in China. The lineup is expected to reach global markets around July. The Chinese lineup may include the Reno 16, Reno 16 Pro, and Reno 16c as successors to the Reno 15, 15 Pro, and 15c. A new development suggests that the global market may also receive a model called the Reno 16F.
Oppo Reno 16 Pro, Reno 16F global versions spotted
As seen above, the global versions of the Reno 16 Pro and Reno 16F have received multiple certifications. The UAE’s TDRA authority has approved the Reno 16 Pro with model number CPH2863, and the same device has also appeared on Europe’s EEC certification platform.
At the same time, the Reno 16F with model number CPH2859 has appeared in the databases of TDRA and Thailand’s NBTC certification authority. The device has also been approved by the TÜV certification platform, which reveals support for 80W fast charging.
The Reno 16 Pro and Reno 16F have also surfaced in the NBD database, revealing that both devices could be available in a 12GB + 512GB configuration.
The NBD database also reveals details about another Oppo phone with model number CPH2865, which could be part of the Reno 16 series. The listing suggests that the device features a 6.587-inch display, 12GB of RAM, and 256GB of built-in storage.
Reports have revealed that the Chinese versions of the Reno 16 and Reno 16 Pro will be powered by the Dimensity 8500 and Dimensity 9500 chipsets, respectively. It remains to be seen whether the Chinese and global versions will share identical specifications.
For more daily updates, please visit our News Section.
Lenovo is preparing to bring back its Legion gaming smartphone lineup after a long gap. The upcoming Lenovo Legion Y70 has now been confirmed for a May 19 launch in China, while several details about its hardware and gaming-focused features have surfaced online ahead of the announcement.
Lenovo Legion Y70 specifications
Legion Y70-
The Lenovo Legion Y70 is expected to arrive with a 6.8-inch flat display that supports a 2K resolution and a 144Hz refresh rate. The company is reportedly positioning the panel as an energy-efficient option despite its high resolution. Powering the device could be Qualcomm’s Snapdragon 8 Gen 5 chipset, which is likely to place it among the top-end gaming smartphones launching this year.
The phone is also said to focus heavily on thermal management. Reports suggest Lenovo may introduce a new three-layer cooling setup combining a vapor chamber, liquid metal cooling, and thermal gel. The cooling system is said to include a 5,500mm² VC plate aimed at keeping temperatures under control during extended gaming sessions and demanding workloads.
For battery performance, the Legion Y70 is tipped to pack a large 8,000mAh battery with support for 90W fast charging. Lenovo is also said to be focusing on long-term battery durability, with claims suggesting the battery could retain over 80 percent health even after several years of usage cycles.
In terms of design, the handset may continue the Legion gaming phone styling with a textured glass back panel and an aluminium frame. It is expected to arrive in black and silver color options. Apart from the Legion Y70, Lenovo is also expected to unveil several other products during its May 19 event, including new tablets, laptops, and foldable devices.
For more daily updates, please visit our News Section.
A couple of new flagship phones, including the iQOO 15T, are expected to hit the Chinese market this month. It is speculated that it may rival the likes of the OnePlus Ace 6 Ultra and Redmi K90 Max in its home market. Recently, tipster Digital Chat Station shared key details about the iQOO 15T, and now a new leak has emerged, revealing a few more details about it.
iQOO 15T specifications tipped
iQOO 15T key specs tipped
Starting from the front, the iQOO 15T will reportedly pack a massive 6.82-inch AMOLED panel delivering a 2K resolution along with a 144Hz refresh rate. Like its rivals, the 15T is said to feature the Dimensity 9500 chipset.
It is no slouch in the battery department, as it is said to pack a huge 8,000mAh battery. While it is expected to support 100W wired charging, it will reportedly lack wireless charging.
For photography, it will feature a 200-megapixel Samsung HP5 primary camera. However, details about its other rear cameras remain under wraps. The handset is also said to feature a metal frame.
Apart from this, iQOO is also said to be working on a new Neo 11 series phone for the Chinese market. While its specifications are yet to be revealed, it is said to be an incremental upgrade over the existing model.
Apart from these phones, iQOO is also expected to announce a flagship tablet called the iQOO Pad 6 Pro. This device is said to feature a 13.2-inch LCD screen with support for 4K resolution, a Snapdragon 8 Elite Gen 5chip, 16GB of RAM, 612GB of storage, and a 13,000mAh battery with 90W fast charging support. It may come in three shades: Man Dao, Grey Crystal, and Silver Wing.
For more daily updates, please visit our News Section.
Amazon is giving shoppers a wider look at how product prices have changed before they buy. Its price history feature, available through the AI shopping assistant Rufus, can now show pricing data across 30, 90, and 365 days.
Before Amazon built price history into its own shopping experience, customers often had to depend on third-party plugins, browser extensions, or external tracking sites. These services helped shoppers judge whether a deal was real, but they were not always reliable. Some had device or region limitations, and others could show missing or inaccurate pricing data.
Amazon is now bringing that information directly into the product page. Instead of relying only on a current discount label, shoppers can see how the price has moved over time before deciding whether to buy immediately or wait.
Amazon says more than 50 million customers have already used price history since the feature launched in 2024. The company also says the average customer checks price history three times a month, suggesting that it has become a regular part of the shopping process for both daily-use products and bigger purchases.
There are two ways to use the feature. On a product detail page, customers can click the price history link placed next to the product price. They can also open Rufus from the product page and ask questions such as “What’s the price history?”, “Has this item been on sale in the past 30 days?”, or “Is this the lowest price recently?”
On the Amazon Shopping app, the Rufus icon appears at the bottom right corner of the product detail page. On desktop, it is available in the top navigation bar.
The feature is currently available to customers in the U.S., UK, Canada, and India. The expanded 365-day price history view is now rolling out in the U.S., UK, and India, with broader availability expected in the coming weeks.
The tool could help shoppers compare prices on electronics, home appliances, furniture, winter clothing, or everyday essentials. A product may look heavily discounted on the day of purchase, but the one-year history can show whether that price is actually low compared with earlier months.
For more daily updates, please visit our News Section.
Casio has released two new Star Wars-themed watches ahead of the upcoming The Mandalorian and Grogu movie. The new models, which fall under the G-Shock and Baby-G product lines, are available starting May 1 in the US, UK, and the European Union.
Design Details
The release includes the $220 GM2100-1ASW and the $130 BA110YK-3ASW. Rather than just stamping a Star Wars logo on standard models, Casio customized the materials and colors to match the film’s two main characters. Both watches feature analog-digital hybrid displays, combining traditional watch hands with small LCD screens for additional data.
The GM2100-1ASW is the larger of the two, designed to reference the Mandalorian’s armor. It features a forged stainless steel bezel with an industrial, brushed finish that mimics the look of Beskar steel from the franchise. It measures 49.3 by 44.4 by 11.8 mm and weighs 72 grams.
As a standard G-Shock, it includes the company’s core guard structure for drop protection and offers 200 meters of water resistance. It also includes a hand shift feature, which temporarily moves the analog hands out of the way so you can read the digital display. It runs on two SR726W batteries, which Casio estimates will last about three years.
The second watch is the Baby-G BA110YK-3ASW, which serves as the Grogu tie-in. It costs $130 and comes in a green resin finish. It has a smaller footprint and weighs 45 grams, making it a better fit for smaller wrists.
The water resistance is lower on this model, rated at 100 meters, and the batteries are expected to last around two years. However, it still includes the standard shock resistance found across the lineup.
Both watches share a similar set of everyday features. They include world time tracking (31 time zones on the GM2100, 29 on the BA110), a 1/100-second stopwatch, countdown timers, and five daily alarms. The GM2100 uses a double white LED for illumination, while the BA110 uses an amber LED.
Casio is also including a custom watch stand with both models. The stand is designed to look like a Bounty Hunter ID card. It ships flat, but it has built-in magnets that allow you to fold it into a rigid 3D stand to hold the watch on a desk or shelf when you aren’t wearing it.
The watches are available now at select retailers, the G-Shock SoHo store, and Casio’s website.
Smartphone batteries naturally degrade over time, which often leads people to consider buying a completely new device. However, simply replacing the aging battery is a practical way to extend a phone’s lifespan. Recognizing this, Xiaomi has announced its May Service Week in China, running until May 7th, offering battery replacements at a noticeable discount.
During this event, the cost for a new battery starts at 47.2 yuan (roughly $7), which includes a 20% discount. What makes this program particularly useful is the wide range of supported devices. The promotion covers 67 different models across several generations.
Eligible smartphones include older devices, such as the Xiaomi 10 Pro, along with models from the Xiaomi 11, 12, 13, 14, and the newly released Xiaomi 15 series. It also covers the Mix series, including the Mix 4, Mix Fold models, and Mix Flip and key Redmi lineups.
This includes the Redmi Note series (such as the Redmi Note 10, 11, 12, 13, and 14 series), the performance-oriented Redmi K series (K40, K50, K60, and K70 series), and the Redmi Turbo series. Additionally, models from the broader Redmi number series, such as the Redmi 14C, are included.
Xiaomi regularly hosts these service weeks throughout the year in China, and they have become a popular initiative. It provides users with an affordable maintenance option, helping to keep functional hardware in use rather than requiring an expensive upgrade.
Alongside the promotion, Xiaomi shared some straightforward advice regarding battery health. The company clarified that normal battery degradation, where a battery gradually holds less charge after hundreds of cycles, is expected behavior. They said that users shouldn’t worry too much about normal wear and should simply consider a replacement when the battery no longer meets their daily routine.
However, Xiaomi also pointed out that abnormal degradation caused by physical impact, extreme temperatures, or poor charging habits should be addressed promptly. To help batteries last longer, the company recommends avoiding extreme heat or cold and maintaining standard charging routines.
For more daily updates, please visit our News Section.
Casio has officially listed the newest addition to its Master of G lineup, the G-Shock Mudmaster GWG-B1000MG-1A9. After floating around the rumor mill for a bit, the watch is now up for pre-order on Casio’s Japanese website for ¥143,000 (roughly $910) and is scheduled to start shipping in later this month.
Design Details
The design of this specific model is heavily inspired by earth science and geology. Casio went with red and orange accents on the dial to mimic the look of magma, while the metal components feature a gold-tone finish. The resin band is also molded to look like different layers of rock strata.
Casio is continuing to use biomass plastics for the main resin parts of the case, bezel, and band. It’s a practical step toward using renewable materials, and it doesn’t seem to compromise the standard shock, dust, mud, and 20-bar water resistance that the Mudmaster series is known for.
Under the hood, the GWG-B1000MG-1A9 isn’t a full smartwatch, but it does have a good amount of connectivity. It features Casio’s Triple Sensor, meaning you get a built-in compass, an altimeter/barometer, and a thermometer. It’s also solar-powered.
Casio says a full charge will get you about six months of normal use without any light exposure, or up to two years if it drops into power-saving mode. For timekeeping, it relies on Multi-Band 6 radio control, which automatically syncs the time if you are in range of towers in Japan, North America, Europe, or China.
You can also pair the watch to your phone via Bluetooth using the Casio Watches app. This handles basic tasks like automatic time correction and adjusting settings, but it also includes a location indicator.
If you set a destination in the app, the physical hands on the watch will point toward it, a helpful feature if you’re hiking and don’t want to keep pulling out your phone. Casio does note that this specific location feature isn’t available in China, however.
Rounding out the spec sheet, the watch has a scratch-resistant sapphire crystal and a double LED light system so you can read the analog-digital display in the dark.
In related news, Casio has recently unveiled a new Coca-Cola G-Shock watch featuring an iconic bottle-inspired design, while the Casio Vintage A159WE-1 has been listed in Europe with its classic styling and a 7-year battery life.
For more daily updates, please visit our News Section.
Let’s be entirely honest with ourselves for a second: most of us do not need a robotic, AI-powered, pan-tilt-zoom (PTZ) 4K webcam to join a morning Zoom sync. The built-in laptop camera will technically suffice to prove you are awake and at your desk.
But over the last few years, the webcam market has evolved from a race for basic competence into a full-blown arms race for absolute overkill. And sitting right at the bleeding edge of that overkill is Obsbot.
I’ve spent the last month using the brand-new Obsbot Tiny 3 as my primary daily driver, alongside its more affordable sibling, the Obsbot Tiny 3 Lite. Obsbot’s Tiny series has been around since 2020, effectively pioneering the AI-tracking webcam space, but the Tiny 3 series feels like a culmination of every wild idea the company has ever had, crammed into an impossibly small chassis.
At $349 for the Tiny 3 and $199 for the Tiny 3 Lite, these are premium devices aimed squarely at content creators, streamers, remote educators, and office workers who simply refuse to look anything less than spectacular.
But after a month of having a tiny robot track my every move across my home office, I’ve realized that the magic of the Tiny 3 isn’t just in its spec sheet; it’s in how seamlessly it fades into the background while doing a dozen incredibly complex things at once.
Here is my deep dive into the Obsbot Tiny 3 and the Tiny 3 Lite.
Design and Hardware
When I first unboxed the Tiny 3, I was genuinely surprised. The name is finally, aggressively accurate. Measuring just 1.5 by 1.5 by 1.9 inches and weighing a mere 2.2 ounces (63 grams), the Tiny 3 is absurdly small. It is 48% more compact and 34% lighter than its predecessor, the Tiny 2. Despite this, it feels incredibly premium.
The main camera module and the two-axis gimbal are encased in a dark gray metal alloy that stays cool to the touch even after hours of continuous 4K streaming.
Tiny 3Tiny 3
The Tiny 3 Lite, interestingly enough, goes in a slightly different direction. It is actually a bit larger in dimensions (1.6 by 1.6 by 2.3 inches) and adopts a softer, more minimalistic design language. Where the Tiny 3 looks sharp and industrial, the Lite feels a bit more approachable and rounded.
Tiny 3 LiteTiny 3 Lite
But the biggest physical divergence between the two lies in how you mount them. This is a point of slight contention for me. The Tiny 3 comes with a detachable magnetic base that snaps onto a separate, included screen clip.
The magnet is incredibly strong, and the modularity is great if you want to pop the camera off and snap it onto a tripod or a desktop stand. However, I can’t help but feel that if it had an internal, integrated clamp too, it would have made life just a bit easier for laptop users on the go. You have to keep track of two pieces.
The Tiny 3 Lite, on the other hand, features an integrated clamp. It’s permanently attached to the base, meaning you can just unfold it and slap it onto any laptop or monitor immediately.
It’s less flexible if you want to do complex tripod rigging, but for everyday use, it’s arguably more convenient. Still, the Tiny 3’s magnetic snap has a satisfying, premium tactility to it that the Lite lacks.
Video Quality
Let’s talk about the glass and the silicon, because this is where the $349 price tag of the Tiny 3 starts to justify itself.
The flagship Tiny 3 is packing a massive 1/1.28-inch 50-megapixel CMOS sensor. For context, that is a larger sensor than you’ll find in many premium smartphones, let alone webcams. It boasts a dual native ISO that scales all the way up to 12,800, and an f/1.8 aperture. It shoots in 4K at 30fps, or, if you want buttery smooth motion, 1080p at a staggering 120 frames per second.
In practice, the image quality is nothing short of breathtaking. I have my desk set up in a room where light hits me from all sides, including right from the ceiling. Usually, this kind of omnidirectional lighting makes things incredibly messy for most devices, as they struggle to cut through the glare and balance the frame properly.
But the Tiny 3, utilizing its DCG (Dual Conversion Gain) HDR technology, does an amazing job of managing this chaos. It handles the light so well that I haven’t faced a single issue with overlighting or harsh blasts of glare on my face. It balances the exposure so effortlessly that it looks like I have a perfectly calibrated, professional studio lighting rig.
The natural depth of field is also a massive win. Because the sensor is so large and the aperture so wide, you get actual, optical background blur. It’s not the aggressive, artificial cut-out you get from Zoom or Google Meet; it’s a gentle, natural fall-off that makes you pop off the screen.
The Tiny 3 Lite steps down to a 1/2-inch 48-megapixel sensor. It still shoots 4K at 30fps and 1080p at 120fps, and it still looks fantastic in good lighting. But in low light when I’m relying on the glow of my monitors and a single desk lamp, the difference becomes apparent.
The Tiny 3 remains clean and sharp, while the Tiny 3 Lite introduces a bit of static-like noise into the background. The Lite’s maximum ISO is capped at 6,400, and while it’s still vastly superior to your laptop’s built-in camera, it doesn’t quite have the night-vision-esque magic of the premium model. But for most users, it is more than enough.
Gimbal and AI Tracking
The defining feature of the Obsbot lineup is the mechanical gimbal, and the AI Tracking 2.0 system on the Tiny 3 series is the best I have ever used.
Both cameras feature a two-axis gimbal that can pan up to 150 degrees mechanically and tilt 90 degrees. When you turn on auto-tracking, the camera physically moves to keep you in the center of the frame. There is no robotic jerking or mechanical whining; it just glides. I can stand up from my desk, pace around my office, and the camera follows me seamlessly.
Obsbot gives you an absurd amount of control over this. You can set it to track your full body, your upper body, or just keep a tight crop on your face. But the new Object Tracking feature is what truly blew my mind. Inside the Obsbot Center software, you can draw a bounding box around anything: a coffee mug, a phone, a toy, a product you are demonstrating, and the camera will lock onto it.
Tiny 3Tiny 3 Lite
If you’re a YouTuber showcasing products or a teacher demonstrating crafts from a top-down view, this feature is honestly fantastic. However, it can occasionally be a hit or miss experience, but I believe this could be improved with a software update.
The Tiny 3 also supports gesture controls (holding up your hand to start tracking, making an ‘L’ shape to zoom). It also includes voice controls as well. Saying “Hi, Tiny” wakes it up, “Track me” initiates the gimbal, and “Sleep, Tiny” points the camera straight down at its base, physically cutting off the video feed for guaranteed privacy.
Audio
Built-in webcam microphones usually aren’t the best, but the audio on the Tiny 3 is actually a solid step up. Both the Tiny 3 and the Tiny 3 Lite use a new three-microphone setup (one omnidirectional and two directional), and the software does a good job of processing the sound for everyday use.
You get a few different audio modes depending on what you need. “Pure Audio Mode” leaves the audio raw without extra processing, which is nice if you want to tweak the sound yourself later. “Spatial Audio Mode” captures stereo sound, so if you move around the room, people on the other end can hear which direction you’re speaking from.
I find myself using “Directional Mode” the most. My room environment isn’t always perfectly quiet. I have a noisy fan, and sometimes I get some noise bleeding in from outside, though it’s pretty quiet when I just have the AC running. Directional Mode does a really good job of focusing on my voice and filtering out those background sounds. Even when the fan is running, it isolates my voice well enough that the people on my calls don’t seem to notice the background hum.
The Tiny 3 also has a Voice Tracking feature. The camera uses the microphones to figure out where a voice is coming from and physically turns to face the speaker. If you have two people in the same room sharing the webcam, it just automatically pans back and forth to whoever is talking at the moment, which makes group calls a lot easier to manage.
Software
To get the most out of these cameras, you need to use the Obsbot Center app (available for Windows and macOS). The software is dense, but beautifully laid out.
If you just want to plug and play, you can leave it in Lite mode. But if you click over to Pro, you get all the controls. You can manually adjust the exposure curves, tweaking shadows, midtones, and highlights independently. You can manually set the white balance by adjusting the red and blue gain. You can set up to three preset gimbal angles, allowing you to snap the camera from a wide shot of your room to a tight crop of your face with a single click.
Obsbot has also built in some virtual camera features, like background replacement and artificial bokeh. The background replacement is significantly better than the native tools in Zoom or Teams, handling the edges around my hair with impressive accuracy.
It is also worth noting that the flagship Tiny 3 has a couple of software tricks the Lite lacks, specifically Desk Mode and Whiteboard Mode. Desk Mode automatically tilts the camera down and digitally flips the image so you can show off documents or sketches on your desk without the image being upside down for your viewers. If you don’t need this, the Lite becomes an even more appealing option.
Final Verdict
After a month of living with both of these cameras, I am thoroughly impressed. Obsbot hasn’t just made a good webcam; they have built a genuinely exciting piece of consumer technology.
If you are a content creator, a streamer, a high-level executive, or someone who simply demands the absolute best image quality and low-light performance available, the Obsbot Tiny 3 ($349) is the undisputed king of the hill.
The 1/1.28-inch sensor is a marvel, the HDR processing is flawless, and the sheer amount of technology packed into a chassis the size of a golf ball is a masterclass in hardware engineering. Yes, I wish the magnetic mount had an integrated clamp for laptop convenience, and yes, it is painfully expensive. But it is the best webcam I have ever tested.
However, if you are looking for value, the Obsbot Tiny 3 Lite ($199) is the real scene-stealer here. For $150 less, you are getting the exact same world-class AI tracking, the exact same incredible triple-mic audio system, and the exact same 1080p 120fps capability.
You lose a bit of low-light fidelity due to the smaller sensor, and you miss out on the Desk/Whiteboard modes, but for 95% of users, the video quality is still going to blow away anything else in the sub-$200 price bracket. Plus, the integrated clamp design, while making the camera slightly larger, is undeniably practical for everyday laptop use.
For more daily updates, please visit our News Section.
A new leak suggests Xiaomi may bring back its experimental Mix line of smartphone. According to a recent report from XiaomiTime, the rumored Xiaomi Mix 5 is already in development, and it could land later this year with some new tricks.
Xiaomi MIx 4 UD Camera is faintly visible from the side view
The report points to internal Xiaomi database entries that reference a device codenamed “hongkong” with the model number Q5. The source suggests that the “Q” prefix could mean a 2026 release window, while the “5” aligns closely with the Mix branding. Previous devices in the series followed similar naming pattern, E5 and E5G for Mix 3 and Mix 3 5G and K8 for Mix 4.
On the hardware side, the phone is expected to run on the upcoming Snapdragon 8 Elite Gen 6 Pro chip.
Xiaomi Mix 5 might still retain under display camera
As for the design, the Mix 5 is rumored to feature an under-display camera, like the Mix 4. The idea still hasn’t matured yet, although few niche brands like RedMagic offers their high-end gaming phones with a under-display camera. Of course, the camera performance is not as you’d expect from an over the surface camera.
There’s also talk of a new “magnetic lens” system for the rear camera. Xiaomi in fact teased the acessory back in 2025 and a previous report claimed that the lens has started mass production and could be seen as early as this year.
Software-wise, the device is expected to ship with HyperOS 4 out of the box. That would make it one of the first phones to run Xiaomi’s next-generation software platform.
Perhaps more interestingly, the Mix 5 might not be limited to China this time. The report suggests Xiaomi is planning a broader global release, excluding Japan but opening availability to other international markets.
There’s still no confirmed launch date, and Xiaomi’s evolving naming strategy leaves some room for interpretation. But taken together, the leaks suggest the company is once again use Mix series to bring its innovative experimental features to masses.
For more daily updates, please visit our News Section.
Smartphones in India have become more expensive starting May 1, 2026, as multiple brands raised prices across mid-range and flagship segments. Companies like OnePlus, Nothing, Xiaomi, and Realme have increased prices by ₹1,000 to as much as ₹5,000. The revised pricing is already live across official brand websites and major online platforms.
Why Are Smartphone Prices Increasing?
The primary reason behind this sudden hike is the rising cost of essential components such as DRAM (RAM) and NAND storage. Global demand for these components has surged, especially due to the rapid growth of AI data centres that require massive memory resources.
At the same time, manufacturers are shifting production toward high-bandwidth memory (HBM), which is more profitable but reduces supply for smartphones. This imbalance is pushing up costs across the industry.
Nothing Phones See Major Price Increase
Nothing has introduced some of the highest hikes among all brands. The Nothing Phone (4a) Pro now starts at ₹44,999, with a ₹5,000 increase across all variants. The Nothing Phone (4a) has become ₹3,000 more expensive, and even the older Phone (3a / Lite) models have received a similar ₹3,000 hike.
This move signals a shift away from the brand’s earlier aggressive pricing strategy.
OnePlus Raises Prices of Flagship Models
OnePlus has also increased prices for its flagship lineup. The OnePlus 15 now starts at ₹77,999, marking a ₹5,000 increase, while higher variants have gone up by as much as ₹6,000. The OnePlus 15R has also seen a smaller increase of around ₹2,500.
This shows that even premium and upper mid-range devices are being affected by rising component costs.
Realme Hikes Prices Across Segments
Realme has increased prices across multiple models, ranging from budget to mid-range smartphones. While some devices saw a flat ₹1,000 increase, others, especially higher-end models like the Realme 16 Pro series, have received hikes of up to ₹5,000.
This impacts buyers across all price segments, including entry-level users.
Xiaomi’s Redmi Series Also Gets Costlier
Xiaomi’s Redmi Note 15 Pro series has also been affected, with price increases of up to ₹2,000. The Redmi Note 15 Pro now starts at ₹31,999, while the Pro+ variant goes up to ₹39,999.
Although the increase is relatively smaller, it still reflects the broader pricing pressure across the market.
Industry Facing a Tough Situation
The smartphone industry is now dealing with rising production costs at multiple levels. Memory prices are increasing rapidly and, in some cases, are becoming as expensive as chipsets. With AI companies consuming large amounts of memory supply, smartphone brands are left with limited options.
They must either increase prices or reduce specifications, both of which can impact consumer demand.
What This Means for Buyers
For buyers, this means smartphones are becoming more expensive across the board. The difference between budget and mid-range pricing is shrinking, and flagship devices are moving even higher in price.
If you are planning to buy a smartphone, it may be a good idea to take advantage of bank offers, discounts, or sale events. Waiting too long could result in paying more, as further price hikes cannot be ruled out.
StarTech.com has introduced a new USB4 docking station designed to simplify connectivity across multiple platforms. Announced on April 30, 2026, the Driverless Dual 4K USB4 Docking Station (208N-USB4-DOCK) works seamlessly with macOS, Windows, and Linux devices. It is positioned as an industry-first solution that enables native dual-display support on MacBooks without requiring drivers or additional software, making it especially useful for mixed-device environments.
Key Innovation
The standout feature of this dock is its ability to support dual displays on MacBooks through USB4 without any drivers. This addresses a long-standing limitation where Mac users often needed expensive Thunderbolt docks for multi-display setups. The dock delivers near Thunderbolt-level performance and is compatible with newer MacBook models, including M3, M4, and M5 devices, ensuring broader usability for professionals.
Performance and Connectivity
The dock uses a single USB-C connection with 40Gbps bandwidth and supports up to 100W Power Delivery for charging. It includes a range of ports such as multiple USB-A and USB-C ports, a 2.5Gb Ethernet port, and dual DisplayPort 1.4 outputs. It can drive up to two displays simultaneously, supporting up to 6K resolution at 60Hz in dual mode or 8K at 60Hz for a single display. High refresh rate support like 4K at 144Hz is also available on compatible systems.
Enterprise-Focused Design
Built with enterprise use in mind, the dock eliminates the need for software installation, reducing deployment time and support issues. It also includes a screw-locking USB-C cable that helps prevent accidental disconnections, making it suitable for shared workspaces and IT-managed environments.
Availability and Pricing
The docking station is priced at $143.99 and is available through major retail and distribution channels. It offers a cost-effective and streamlined alternative to traditional docking solutions, especially for organizations managing diverse device ecosystems.
Xiaomi has officially introduced the YU7 GT at the Beijing International Auto Show 2026, with its launch expected by the end of May. Positioned as a flagship model in the YU7 lineup, the GT focuses on delivering a balance between performance and everyday usability rather than extreme track performance.
The company clarified why this model is called “GT” instead of “Ultra.” While “Ultra” models are designed for maximum performance and track dominance, the YU7 GT follows the Grand Touring philosophy. This means it is built for high-speed driving combined with comfort and long-distance capability, rather than being a pure racing machine.
Under the hood, the YU7 GT features a powerful dual-motor setup, producing around 1003 PS. It can reach a top speed of up to 300 km/h, making it one of the fastest SUVs in its category. The vehicle is powered by a ternary lithium-ion battery, offering a claimed range of up to 705 km (CLTC), which supports long journeys without frequent charging stops.
In terms of design, the YU7 GT carries a sporty and aerodynamic look. It features signature water droplet headlights, multiple air vents for improved airflow, and a rear ducktail spoiler for added stability. The overall design focuses on both performance and efficiency.
The SUV also emphasizes stability and comfort, with a chassis tuned for high-speed driving and long-distance cruising. With its combination of strong performance, premium comfort, and extended range, the YU7 GT targets users who want speed without sacrificing practicality.
Overall, the YU7 GT stands out as a balanced performance SUV built for real-world driving, not just track records.
Portable fans are usually straightforward, single-purpose gadgets, but Cuktech is trying to make them a bit more versatile. The company has recently launched the CP Modular Fan Plus, a new portable cooling device that leans heavily into modularity and doubles as a fast-charging power bank.
Cuktech CP Modular Fan Plus Specifications
The CP Modular Fan Plus introduces a modular design powered by Cuktech’s proprietary Power-Pin magnetic interface. This system allows users to attach accessories such as external power modules and extension cables. The magnetic connection is rated at 15N, ensuring a secure and stable fit for everyday use. Cuktech has included a lanyard and a portable form factor, making it easy to carry or use on the go.
The fan runs on a high-speed three-phase brushless motor. It delivers wind speeds of up to 11 m/s and uses Turbo Charged vortex airflow technology to boost air output by 40%. The new motor features a larger diameter than its predecessor, improving airflow and reducing energy consumption by 75%. The fan provides three adjustable speed levels and a Boost mode for maximum cooling performance.
Cuktech has equipped the fan with a nine-blade turbine system. It supports dense airflow cutting and distributes air over a larger area. The CP Modular Fan Plus covers up to 65,516 mm² and operates with advanced acoustic tuning to minimize noise and vibration. It generates 50dB on the lowest setting, 62dB on medium, and 66dB on the highest setting.
The fan includes two built-in 5,000mAh batteries, resulting in a combined capacity of 10,000mAh. It provides up to 37 hours of use on the lowest setting, 24 hours on medium, and 4 hours on high.
The fan also functions as a power bank with 33W output and 27W input. It supports fast-charging protocols like PD, PPS, and MiPPS, enabling it to charge multiple devices efficiently.
The CP Modular Fan Plus allows pass-through charging, letting users operate the fan while it charges. It features built-in safety measures such as overcurrent protection, temperature control, and short-circuit protection. The fan includes a battery indicator system with LED lights for quick status updates.
In related news, the company has recently launched the Cuktech 15 Air power bank, featuring up to 65W output along with a built-in smart display.
For more daily updates, please visit our News Section.
LG is bringing a new dual-mode OLED gaming monitor to the Japanese market. The UltraGear 32GX870B is a 31.5-inch display that lets you choose between a sharp 4K resolution at 240Hz for visually demanding single-player games, or a much faster 480Hz at 1080p for competitive shooters. It’s a practical two-in-one approach that is becoming increasingly common in the high-end monitor space.
LG UltraGear 32GX870B Specifications
The panel itself uses LG’s fourth-generation Tandem OLED technology. Unlike the previous 32GX870A model, which relied on a three-layer emission structure, this new version steps up to a four-layer Primary RGB design. In everyday terms, this translates to improved brightness and color performance.
LG notes the monitor hits a typical SDR brightness of 335 nits and can peak at 1,500 nits in HDR. It covers 99.5% of the DCI-P3 color gamut, boasts a Delta E of less than 2 for out-of-the-box color accuracy, and offers a dynamic contrast ratio of 1,850,000:1. There is also an anti-glare coating to help mitigate reflections from ambient room lighting.
The dual-mode functionality is the main draw here, supported by VESA’s Dual Mode standard. If you switch over to the 1080p 480Hz mode for esports titles like Valorant or Counter-Strike 2, playing on a 32-inch screen can sometimes feel too large for your field of view.
To address this, LG included a feature that scales the display area down to either 27 inches or 24.5 inches with black borders, mimicking the standard monitor sizes used in competitive tournaments. Add in a 0.03ms gray-to-gray response time, VESA ClearMR 13000 certification, and support for both Nvidia G-Sync and AMD FreeSync Premium Pro, and motion blur shouldn’t be an issue.
For connectivity, the monitor includes a DisplayPort 2.1 (UHBR20) connection, which provides enough bandwidth to run these high refresh rates without relying heavily on display stream compression. You also get two HDMI ports, a USB-C port with 90W power delivery (which is great for charging a laptop with a single cable), and a two-port USB 3.2 Gen 1 hub.
The monitor includes built-in 7W stereo speakers and a suite of AI-driven features for upscaling and sound optimization. The stand offers a standard array of ergonomic adjustments, including height, tilt, swivel, and a 90-degree pivot, all wrapped in a slim, four-side borderless design.
Pricing and Availability
The UltraGear 32GX870B is priced at 169,800 yen ($1,081), and shipments in Japan are slated to begin on June 11th. There is no official word yet on when it will hit other markets, but given LG’s usual release cycles, a wider rollout seems likely in the coming months.
Even in an era dominated by cloud storage and ultra-fast portable SSDs, there is still a very real need for a basic, reliable USB flash drive. Kingston is leaning into that dependable, everyday market with the launch of its new DataTraveler Exodia DTXG2 in China. The drive is currently listed on JD.com, with its first official sale scheduled to kick off on May 6.
Kingston DataTraveler Exodia DTXG2 Specs
The DTXG2 is a straightforward piece of hardware that doesn’t try to reinvent the wheel. It utilizes a standard USB-A connector, making it immediately compatible with the vast majority of desktop computers, older laptops, and various digital peripherals you likely already have lying around. It supports a USB 3.2 Gen 1 interface, though it remains fully backward compatible with USB 2.0 ports, ensuring you won’t run into issues when plugging it into legacy hardware.
When it comes to performance, the specifications are firmly grounded in basic utility. The drive offers a maximum read speed of 50MB/s and a write speed of 5MB/s. Those numbers mean the DTXG2 isn’t built for transferring massive 4K video projects or acting as a scratch disk for heavy media editing. Instead, it is positioned strictly for everyday tasks, moving text documents, PDFs, a few photos, or small media files between devices without much fuss.
To make the drive a bit more practical for daily carry, Kingston has opted for a colorful, keyring-style design. The back end of the drive features a prominent loop, making it easy to attach to a set of keys, a lanyard, or a backpack zipper so it doesn’t get lost in your pocket. To protect the USB-A connector, it includes a basic black snap-on cap designed to stay firmly in place while bouncing around in a bag.
Kingston is also using color to differentiate the storage tiers, which is a helpful touch if you happen to own more than one or need to grab a specific drive at a glance. The entry-level 64GB model comes in a standard black finish and is priced at an accessible 59.9 yuan ($9).
Moving up the stack, the 128GB version costs 89.9 yuan ($13) and features an ocean blue accent. The 256GB variant comes in lemon green for 209 yuan ($30), while the top-tier 512GB model stands out in purple and will set you back 419 yuan ($61).
For a bit of added security, Kingston is backing the DTXG2 series with a five-year limited warranty.
OpenAI CEO Sam Altman has pushed back against growing fears that artificial intelligence will replace human jobs, calling such concerns “overly pessimistic” in the long run. Speaking on X (formerly Twitter), Altman emphasized that OpenAI’s goal is to build tools that “augment and elevate” human capabilities rather than replace people entirely.
His comments come at a time when layoffs across industries, especially in the United States, have raised alarm. Several companies have linked job cuts directly to AI adoption, fueling concerns that traditional roles could become obsolete. A widely discussed example is King, the company behind Candy Crush Saga, which reportedly laid off developers after they created AI tools capable of generating game levels.
The anxiety has been further intensified by statements from Dario Amodei, CEO of Anthropic. Amodei recently suggested that AI could soon write nearly all code within the next 6 to 12 months. Such predictions have strengthened the belief that AI may dominate large parts of the workforce.
Altman, however, disagrees with this outlook. He argues that while AI will transform jobs, it will not eliminate the need for humans. Instead, he believes people will shift toward more meaningful and higher-value work. According to him, adaptation, not replacement, will define the future of employment.
Looking ahead, Altman envisions a world where AI reduces the need for intense labor, allowing people to live more flexible and fulfilling lives. While debate continues within the industry, his stance highlights a more optimistic path where humans and AI work together rather than compete.
One UI 8.5 rollout is about to begin, and dozens of Galaxy models are lined up to receive this feature-rich upgrade that doesn’t look like an incremental upgrade at all. It brings numerous visual upgrades, new features, and expanded customization options that really level up the software experience.
Among the long list of changes coming to One UI 8.5, there are five features I am most excited about. I really wish Samsung would bring them to the majority of eligible devices.
1. Modern Liquid Glass interface with smoother animations
Liquid Glass interface in One UI 8.5
One UI 8.5 introduces Liquid Glass design for the first time on Galaxy devices. We know where the inspiration comes from (hello, Apple). The updated design language emphasizes transparency, floating surfaces, rounded controls, and soft depth effects across core apps and the system UI, making One UI feel more premium and modern.
Part of this new design language includes floating navigation bars with semi-transparent panels and more pronounced blur and shadow layering to create a “glass” feel. You’ll see it in the Settings app and first-party apps like Dialer, Gallery, and Calculator, replacing the traditional flat, rectangular navigation bar. The back button and other controls appear as separated floating elements, allowing more room for content.
The new Liquid Glass design is most prominent in Samsung’s own apps, but other areas, including notifications, widgets, and the control center, also receive a subtle glass-style treatment.
2. Fully customizable Quick Panel
Quick Panel customization in One UI 8.5
The Quick Panel in One UI 8.5 is receiving its biggest customization update yet. You can now move tiles and widgets wherever you want, resize them, or change their orientation to create a layout that is perfect for you. You can even remove every toggle to get an almost empty panel.
Brightness and volume sliders are also part of the latest changes, with the ability to switch between horizontal and portrait-style layouts. You can customize the panel however you like instead of using Samsung’s default layout. The panel can become messy if you over-customize, but Samsung’s got you covered. You can easily reset to the default layout.
3. Calling gets a major AI upgrade
Image credit: Sammobile
One UI 8.5 brings major upgrades to calling, now allowing the phone to automatically answer unknown or suspected spam calls. The AI assistant asks the caller’s purpose, shows you a live transcript, and lets you decide whether to pick up or mark as spam. This is a big step up from the manual Bixby Text Call, helping you avoid interruptions from robocalls or telemarketers.
You can also enable the auto answer with AI feature to let the device automatically answer calls after a specific delay (5-30 seconds) and provide a live text transcript. This is particularly useful when you are busy or have Do Not Disturb enabled, allowing you to see the caller’s query via a live transcript before even picking up the call.
One UI 8.5 also introduces a direct voicemail feature that lets callers leave a voice message directly on your device rather than a carrier server. You can see the live transcript of the voicemail as it is being recorded in real-time.
Even during a normal call, you can see real-time call options, making it easier to follow in loud environments. Another small but useful upgrade is that the Now Bar shows a dedicated counter for missed calls, making it easier to track without unlocking the device.
4. A new Creative Studio app for AI creativity
Samsung has added a new Creative Studio app in One UI 8.5, which is basically a central hub for generative AI creativity. The app lets users create wallpapers, stickers, greeting cards, invitations, and profile cards with simple sketches, existing photos, or text prompts.
Image credit: Sammyfans
The app supports multiple aspect ratios (such as 16:9 and 4:3) and various art styles, including Childhood Sketch, Marker Drawing, and Oil Painting.
5. Sharing files got a lot easier (even with Apple devices)
Samsung has made significant upgrades to file sharing to bridge the gap between its ecosystem and other platforms, particularly Apple devices. A major addition is a new “Share with Apple devices” option in the Quick Settings menu, enabling seamless, high-speed transfers to iPhones, iPads, and Macs that use AirDrop.
One UI 8.5 also makes it easier to access the storage of one Galaxy device directly from another through the My Files app. For example, you can browse photos, music, and documents stored on your Galaxy Tab directly on your Galaxy phone, provided both devices are signed into the same Samsung account.
We’ll keep sharing with you the latest One UI updates in the Samsung section on this website. You can visit that page regularly to get fresh details. Or, if you prefer news on the go, make sure to follow our Telegram channel.
Vivo X300 Ultra Global is shaping up to be one of the most powerful flagship smartphones of 2026, combining top-tier hardware with an advanced camera system and a massive battery. Designed for global users, this version supports networks in most countries, making it a flexible option for international buyers.
Availability and Price
Vivo X300 Ultra Global is currently available for pre-order and will begin shipping on May 16. It is listed at a starting price of $1,699, placing it firmly in the premium flagship category.
Display and Design
The phone features a large 6.82-inch BOE Q10+ AMOLED display with a sharp 2K resolution (3168 × 1440 pixels). It supports a smooth 144Hz refresh rate along with high-frequency dimming, ensuring both fluid visuals and comfortable viewing. This makes it ideal for gaming, streaming, and everyday use.
Performance and Software
Powered by the Snapdragon 8 Elite Gen 5 processor, the Vivo X300 Ultra delivers flagship-level performance. It comes with 12GB or 16GB RAM and storage options up to 1TB using fast UFS 4.1 technology. The device runs on Android 16 with OriginOS 6, offering a clean, fast, and modern user experience.
Camera System
Photography is a major highlight here. The triple rear camera setup includes a 200MP Sony YT-901 main sensor, a 200MP periscope telephoto lens, and a 50MP ultra-wide camera. It also supports telephoto macro shots and features Zeiss T* coating for improved image clarity. On the front, a 50MP camera handles selfies and video calls.
Battery and Charging
The device packs a large 6600mAh battery with 100W fast charging. It can reach 50% in just 10 minutes and fully charge in about 30 minutes, making it highly practical for heavy users.
The standard iPhone is typically the default choice for most buyers, offering a balance of new features and approachability. However, if recent supply chain reports are accurate, the base iPhone 18 might represent a shift in how Apple handles its non-Pro lineup.
Between a rumored change in the release schedule and a few specific hardware compromises, the standard iPhone 18 is shaping up to be an interesting, if slightly segmented, device.
Here is a look at what the rumors currently suggest for the base iPhone 18, and what it means for anyone planning to upgrade.
Updated Launch Timeline
For years, consumers have expected a new lineup of iPhones every September. But Apple is reportedly adjusting its strategy for the iPhone 18 cycle. Instead of releasing all four models at once in the fall of 2026, the company is expected to focus its September event entirely on the higher-end devices: the iPhone 18 Pro, the Pro Max, and a rumored foldable model.
If you are waiting for the standard iPhone 18 or the more affordable iPhone 18e, reports indicate you will need to wait until the spring of 2027. Industry analysts suggest this split is largely driven by supply chain costs, particularly the rising price of memory. By spacing out the launches, Apple can prioritize its higher-margin Pro models first.
Shift in Display Priorities
The iPhone 18 is expected to keep the 6.3-inch display size and the 120Hz ProMotion refresh rate introduced with the iPhone 17. However, the underlying technology might take a slight step back compared to the Pro models.
According to supply chain leaks, the base iPhone 18 will use Samsung’s M12+ OLED material, which is an iterative version of the panel used in the iPhone 14 Pro. Meanwhile, the iPhone 18 Pro models will move on to the newer M16 material.
The primary difference here isn’t necessarily how the screen looks, but rather how efficiently it operates. Older OLED panels require more power to achieve the same brightness levels. While the iPhone 18 will benefit from Apple’s highly efficient new 2nm A20 chip, some of those battery life improvements might be offset by the older display technology.
There are rumors that all three iPhone 18 models will feature a smaller Dynamic Island cutout. However, conflicting reports suggest it may be limited to the Pro models.
12GB RAM Standard Across All Models
Perhaps the best upgrade coming to the base iPhone 18 is its memory. Apple is reportedly standardizing 12GB of RAM across the entire iPhone 18 lineup, a notable increase from the 8GB found in previous base models.
The reasoning behind this is straightforward: on-device artificial intelligence. Apple Intelligence features, particularly the anticipated iOS 27 Siri upgrades powered by new language models, require significant memory to run smoothly without relying on cloud processing.
By giving the base iPhone 18 enough RAM to handle these tasks, Apple is ensuring the device will remain capable and responsive for years to come.
Cameras and Cost-Cutting Measures
On the camera front, the standard iPhone 18 is expected to retain a dual 48-megapixel rear setup (main and ultrawide), skipping the variable aperture lens rumored for the Pro models. However, the front-facing camera is slated for a welcome upgrade to 24MP, which should improve the clarity of selfies and video calls.
To keep production costs manageable, Apple might also simplify the Camera Control button. Current rumors suggest the company could remove the capacitive touch layer, relying solely on pressure sensors to register inputs.
It is a minor change that most users may not even notice, but it highlights Apple’s effort to maintain the phone’s expected $799 starting price amid rising component costs.
The Overall Picture
Apple is drawing a clearer line between its standard and Pro models. The base iPhone 18 seems designed to be a practical, capable device focused on delivering Apple’s latest software and AI features, rather than pushing the boundaries of hardware.
If you don’t mind waiting until the spring of 2027, the inclusion of 12GB of RAM and the new A20 chip should make it a reliable choice, even if it misses out on the most advanced display technology.
For more daily updates, please visit our News Section.
The smart home and home appliance brand of Xiaomi, called Mijia, has introduced a new Mijia Smart Dishwasher Pro Built-in 18-Set in China. Now available through Xiaomi Youpin at a listed price of 6,999 yuan (~$1,025), the dishwasher supports up to 18 place settings and claims it can clean around 130 pieces of tableware in a single cycle.
Its internal layout uses a three-layer rack system, designed in what Xiaomi calls a “Chinese-style” configuration. The dishwasher uses a triple-spray-arm system paired with a five-stage vortex wash. Xiaomi says this setup helps push water into corners and tight spaces that are usually harder to reach. There’s also a BLDC dual-frequency motor delivering up to 52,000Pa of washing pressure.
The machine includes a built-in 450ml detergent tank, and a single refill can last up to three weeks, depending on usage. One of the more noticeable features is the projected floor display. Instead of checking a panel, users can see the washing progress projected onto the ground.
Wash cycles and sterilization
Drying and sterilization are handled through a combination of high-temperature cycles and airflow. The dishwasher supports temperatures up to 135°C for internal sterilization, alongside what Xiaomi describes as a dual-duct disinfection system.
There’s also an automatic door-opening feature to speed up drying by releasing moisture after a cycle ends. For faster use cases, it has a 59-minute wash-and-dry mode.
The dishwasher supports 16+4 washing programs that cover different cleaning needs. It also integrates with Xiaomi’s ecosystem, allowing control through the Mijia app or voice commands via XiaoAI-enabled devices.
In terms of build, the unit measures 598 × 775 × 570mm and is designed for embedded installation. It weighs around 45.5kg and runs on standard 220V power. Water consumption is rated at 12.4 liters per cycle, with energy usage at about 0.835 kWh per run, aligning with China’s efficiency standards.
Chip giant TSMC is aggressively expanding its advanced 2nm production capacity to meet the unprecedented demand for artificial intelligence (AI) chips and high-performance computing (HPC). The company has set up five state-of-the-art fabrication plants, all entering the ramp-up phase this year, gearing towards the most aggressive expansion in the company’s history.
At TSMC’s 2026 Technology Symposium held in Silicon Valley recently, Hou Yung-ching, Senior Vice President, Deputy Co-COO, and Chief Information Security Officer, revealed that the company is pushing forward with its expansion plan at “twice the speed.” He added that the 2nm process has officially entered mass production and its yield learning curve is superior to that of the 3nm generation, even though the newer node uses a more complex nanosheet architecture, demonstrating TSMC’s leadership in advanced processes.
Even with higher production capacity, there will still be a shortage of high-performance chips due to explosive demand. To counter that, major players including NVIDIA, Apple, Qualcomm, and AMD have reportedly secured large allocations of N2 capacity. Apple alone is reported to have secured more than half of the initial N2 capacity from TSMC.
Hou Yung-ching pointed out that multiple fabs simultaneously introducing new processes in the same year has never happened before. With the five 2nm fabs in operation, TSMC is expected to increase output capacity by up to 45% compared to the same period for 3nm fabs, a significant increase in capacity utilization. TSMC also plans to upgrade or install nine new factories along with capacity expansion projects each year to significantly ramp up its production capacity, effectively doubling the company’s historical expansion rate. The production is also being expanded at existing fabrication plants in Arizona, USA; Kumamoto, Japan; and Dresden, Germany.
Supported by strong demand, TSMC’s wafer shipments for AI accelerators are increasing by 11x, and demand for large-size chips featuring advanced packaging technologies is going up by 6x. And with continuous upgrades to 3D packaging technologies, TSMC has shortened the mass production time for SoIC chips by up to 75%, resulting in faster chip production. The overall advanced packaging capacity is estimated to grow by 80% in 2027.
TSMC is witnessing explosive demand for its high-performance node, pushing the company to expand its production capacity at a pace never seen before while simultaneously advancing large-scale future expansion plans. The company will continue to strengthen its leading advantage and domination in the semiconductor industry.
Belkin has introduced a new high-power desktop charging solution, expanding its range of multi-device chargers. The newly listed 2500W desktop charger is now available on JD.com for 329 yuan, with a slightly lower launch price of 326 yuan. This product is designed for users who need to power multiple devices at once without cluttering their workspace.
Compact Design with Multiple Ports
The charger features a compact desktop form factor with dimensions of 101 × 82.98 × 41.5 mm and comes in a matte black finish. Despite its small size, it offers a powerful and versatile setup. The front panel includes four USB ports, two USB-C ports rated at 70W each, and two USB-A ports offering 12W output. In addition, the charger includes three AC outlets, with two placed on the top and one at the back, making it suitable for both charging and powering devices.
High Power Output and Practical Features
One of the key highlights of this charger is its ability to support up to seven devices simultaneously. With a total power capacity of 2500W, it can handle everything from smartphones and laptops to household electronics. LED indicator lights on the top panel provide clear status updates, adding to its ease of use.
Low Power Alternative: 70W GaN Desktop Charger
Belkin’s 70W GaN 7-in-1 desktop charger (model SRZ001) offers a slightly lower power alternative. It also includes three AC outlets and four USB ports, with USB-C ports supporting up to 70W output and PPS charging. The device measures 96 × 83 × 42 mm, weighs 480 grams, and comes with a 1.5-meter cable.
Both chargers focus on convenience, multi-device support, and efficient power distribution. The 2500W model stands out for heavy-duty use, while the 70W GaN option is better suited for everyday charging needs.
Anker has introduced its first in-house AI chip platform called “Thus.” The new chip will officially debut on May 21, 2026, during its launch event in New York City. This marks the company’s move into custom silicon, focusing on bringing advanced AI features directly to compact devices like wireless earbuds.
Built for Speed and Efficiency
The Thus chip is based on Compute-in-Memory (CIM) architecture, which combines processing and memory into a single unit. Instead of moving data between separate components, it processes data where it is stored. This reduces latency, improves speed, and lowers power consumption, key for small, battery-powered devices. Anker claims the chip delivers up to 150× more AI computing power compared to its earlier audio products.
Smarter Audio with On-Device AI
A major highlight of the Thus chip is real-time AI processing directly on the device. This allows features like noise cancellation and voice enhancement to work faster without relying on cloud processing. It also improves privacy and ensures more stable performance in different environments.
First Product: AI-Powered Earbuds
The chip will first appear in a new flagship pair of earbuds launching alongside it. These earbuds are expected to feature advanced “Clear Calls” technology using AI-based environmental noise cancellation. The setup includes eight microphones and bone-conduction sensors to filter background noise and improve call clarity.
Anker plans to expand the Thus chip beyond audio products into mobile accessories and other smart devices. The goal is to bring faster, more efficient on-device AI to a wider range of everyday products.
Vivo has quietly launched the Vivo S50t smartphone in China. It may seem like a new smartphone altogether, but it’s essentially a reworked version of the Vivo S50 launched late in 2025. The differences are small. You might even miss them.
The biggest change is under the hood. Vivo has swapped faster UFS 4.1 storage for UFS 3.1 here. That’s not the kind of downgrade you’ll notice immediately in day-to-day use. Everything else remains largely intact.
The small storage change also affects the price. The 12GB RAM and 512GB storage model starts at 3,299 yuan, though it drops to 3,199 yuan for a limited time. The 16GB + 512GB version comes in at 3,599 yuan. The Vivo S50, in comparison, costs around 100 yuan for the 12/512GB variant.
Vivo S50t Specifications
The design hasn’t changed much either. The phone keeps a slim profile, measuring as thin as 7.49mm in some color options, with a satin-finish glass back and an aluminum frame. Vivo is offering it in four finishes: Confession, Serenity Blue, Inspiration Purple, and Space Black.
The display is a 6.59-inch AMOLED panel with a 1.5K resolution and support for 120Hz refresh rate, along with HDR and a P3 color gamut. It also has some eye-comfort features, including low blue light tech and high-frequency PWM dimming.
Inside, the phone runs on the Snapdragon 8s Gen 3 chip, paired with LPDDR5X RAM. It ships with OriginOS 6 based on Android 16. There’s also a large 6,500mAh battery, while the charging is capped at 90W wired, with no wireless charging support.
As for the camera, the rear setup includes a 50MP main sensor, an 8MP ultra-wide, and a 50MP periscope telephoto lens using Sony’s IMX882 sensor. The selfie is a 50MP unit. Both the front and rear cameras include dedicated flash units.
Other features include an ultrasonic fingerprint sensor, Wi-Fi 6, NFC, Bluetooth 5.4, and a range of standard sensors. There’s also an IR blaster and an X-axis linear motor.
Two flagship phones, two very different approaches to what a premium smartphone should be. The Huawei Pura 90 Pro leans into durability, refined camera control, and a polished ecosystem, while the Xiaomi 17 Pro goes all-in on cutting-edge hardware, performance, and standout features. This comparison matters for buyers deciding between reliability and raw innovation. With both devices sitting in a similar price bracket, the real question isn’t just which is better on paper, but which one actually delivers more value in everyday use.
Please note: Huawei Pura 90 Pro is expected to launch in the second week of May, so some specifications may still change or be refined closer to the official launch.
Disclaimer: Specs are based on available data. Actual performance may vary. Verify details from official sources before buying.
Design and Display
Build and Feel
Both phones use premium materials with glass and aluminum, but the experience differs slightly. The Huawei Pura 90 Pro feels more rugged with IP68/IP69 protection, giving it an edge in durability under harsher conditions. The Xiaomi 17 Pro, while also IP68 rated, focuses more on refinement with its Dragon Crystal Glass and slightly more modern finish. Xiaomi also introduces a secondary rear display, which adds a unique functional touch. Huawei leans toward a solid, dependable flagship feel, while Xiaomi feels more experimental and feature-rich.
Display Quality
Huawei offers a sharp LTPO OLED panel with smooth 120Hz refresh and balanced color output. However, Xiaomi pushes things further with higher brightness, Dolby Vision, HDR10+, and a much higher PWM dimming rate. The display feels more vibrant and versatile, especially for HDR content. The secondary display also adds usability benefits that stand out in daily use.
Verdict
Xiaomi 17 Pro delivers a more advanced and feature-packed display, while Huawei focuses on durability and consistency.
Specifications Including Battery
Performance
Huawei’s Kirin 9030S is capable of everyday tasks and optimized for HarmonyOS, but Xiaomi’s Snapdragon 8 Elite Gen 5 is on another level. It delivers significantly higher performance, better efficiency, and stronger GPU output for gaming and heavy workloads. The Xiaomi feels faster and more future-proof, especially with UFS 4.1 storage. Huawei remains smooth, but Xiaomi clearly targets power users.
Battery and Charging
Both phones offer large batteries, but Xiaomi takes the lead with a bigger capacity and much faster 100W wired charging. Wireless charging is equal on paper, but Xiaomi’s reverse wireless charging is far more powerful. Huawei still offers reliable endurance, but Xiaomi feels more aggressive and convenient for fast top-ups.
Verdict
Xiaomi 17 Pro dominates in performance and charging, making it the better choice for demanding users.
Camera
Main and Secondary Lenses
Huawei focuses on versatility with a variable aperture main sensor and strong 4x telephoto performance. It excels in controlled lighting and offers consistent image quality. Xiaomi, however, brings a more advanced camera system with a larger sensor, 5x periscope zoom, and Leica tuning. It also supports 8K recording and more advanced video formats, making it feel more complete. Xiaomi’s setup feels more flexible and modern overall.
Selfie Camera
Huawei’s 13MP ultrawide selfie camera is functional and supports 4K video, but Xiaomi’s 50MP front camera offers far more detail and better versatility. It feels more aligned with current flagship expectations, especially for content creators.
Verdict
Xiaomi 17 Pro delivers a more powerful and versatile camera system, while Huawei focuses on consistency and control.
Pricing
The Huawei Pura 90 Pro is priced at around $800 (₹75,000), while the Xiaomi 17 Pro comes in lower at about $700 (₹62,000). This creates a noticeable price gap despite Xiaomi offering more advanced hardware in several areas.
Is the Price Justified?
Huawei justifies its price with durability, optimized software, and a refined camera experience. However, Xiaomi clearly offers more aggressive value with a stronger chipset, better display, faster charging, and more advanced camera capabilities. The pricing strategy makes Xiaomi feel like a more competitive flagship option.
Verdict
Xiaomi 17 Pro offers significantly better value for money, while Huawei feels slightly overpriced for what it delivers.
Disclaimer: Prices are approximate and may vary based on country, region, launch timing, and applicable taxes. Always check whether the listed price is for a China unit or a global/international variant when purchasing.
Conclusion
Huawei stands out with its rugged IP69 rating, satellite messaging support, and variable aperture camera, which gives it a unique edge in durability and photography control. Xiaomi, on the other hand, pushes innovation with a secondary rear display, top-tier chipset, advanced video capabilities, and ultra-fast charging. It feels more forward-looking and feature-packed overall.
Verdict
Huawei Pura 90 Pro is ideal for users who prioritize durability and stable performance. Xiaomi 17 Pro is the better all-around flagship with stronger performance, better features, and higher value, making it the more sensible choice for most users.
Disclaimer: This comparison is based on the specifications provided and is intended for general informational purposes. Actual performance, camera results, battery life, and overall experience may vary depending on real-world usage, software updates, and individual preferences.
Huawei has started teasing the Nova 15 Max, confirming it will be unveiled at a global launch event in Bangkok on May 7, 2026. The phone will join the rest of the Nova 15 lineup, which already includes the standard, Pro, and Ultra models that debuted in China late last year.
The company has already shared a few official images and some early details. The Nova 15 Max is set to pack a massive 8,500mAh battery pack, which is unusually large even by current standards. If it performs as expected, it could easily stretch beyond a full day, possibly even two for lighter users.
Huawei is also highlighting a 50MP RYYB main camera, which should help with low-light performance, along with stereo speakers. The design is very different compared to the rest of the Nova 15 series, at least from what has been shown so far. Color options have been confirmed as well.
The Nova 15 Max is expected to be closely related to the Enjoy 90 Pro Max, which launched in China earlier this year. That device comes with a 6.84-inch AMOLED display, Kirin 8000 chipset, 40W charging, and basic but usable cameras.
So this looks like a familiar strategy. Take an existing model, tweak it slightly, and position it for global markets under a different name. In this case, the big selling point is clearly battery life.
The phone is expected to sit somewhere in the mid-range segment, aimed at users who care more about endurance and screen size than flagship-level performance.
Huawei is also expected to announce a few other products at the same event, including the Watch Fit 5 series and a new MatePad Pro Max tablet, so May 7 could end up being fairly packed.
With the launch just around the corner, more details around pricing, storage variants, and availability should not be too far away. If the battery holds up in real use, the Nova 15 Max could end up being one of the more interesting endurance-focused phones this year.
Xiaomi’s Android 17 Developer Preview program has just gone live, and it brings an unexpected upgrade to HyperOS 3.3. The company has restricted the beta program’s access to a limited number of high-end smartphones initially, with broader device support coming in the near future.
The Developer Preview program is currently available for four Xiaomi devices: Xiaomi 17, Xiaomi 17 Ultra, Xiaomi 15T Pro, and Leica Leitzphone powered by Xiaomi. If you’re rocking any of these devices, you can sign up for the testing program and get access to the upcoming features and upgrade well ahead of the public release. This release, however, signals a major shift in Xiaomi’s naming strategy for its HyperOS skin.
As spotted by Ximi Time, the Android 17 beta build for Xiaomi devices comes with HyperOS 3.3, skipping HyperOS 3.2 for some reason. This suggests Xiaomi won’t make the jump to HyperOS 4 but will pair HyperOS 3.3 with Android 17.
How to get Android 17 beta on your Xiaomi device
Remember that beta builds are prone to having bugs or unfinished features. Some apps may face compatibility issues. Therefore, it’s best to avoid such builds altogether or install them on a secondary device.
Before installing a beta build, it’s highly recommended to back up important data to cloud storage or copy it to a different device to be on the safe side.
Step 1: Ensure your phone is running the required firmware version.
Xiaomi 17: OS3.0.301.0.WPCMIXM
Xiaomi 17 Ultra: OS3.0.9.0.WPAMIXM
Leica Leitzphone powered by Xiaomi: OS3.0.9.0.WPAMIXM
Xiaomi 15T Pro: OS3.0.11.0.WOSMIXM
Step 2: Download the correct Android 17 beta build for your Xiaomi phone.
Step 3: Copy the downloaded ROM upgrade ZIP file to the internal storage (if it isn’t there already)
Step 4: Go to Settings > About phone > tap the Xiaomi HyperOS logo at the top of the page.
Step 5: Tap Xiaomi HyperOS at the top for 10 times > click the three-dots icon in the top-right corner > select Choose update package.
Step 6: Select the ROM upgrade file you downloaded in step 2 and install it.
This is a major upgrade, and so the installation time could be longer. It’s best to charge your device at least 40% before the installation. Also, ensure the device has at least 10GB of free space for a smoother installation and better performance.
If you face major issues or want to revert to a previous stable build for any reason, you can download the required firmware using the links given below and flash it on your phone the same way. However, this could result in data loss. So, back up your important data beforehand.
We’ll keep tracking the latest developments on Android 17 and post them in the Xiaomi section on this website. Remember to visit the page at least once in a while to get fresh details. Or, you can follow our Telegram channel to get instant updates.
A new leak suggests Xiaomi is getting ready to launch its next Pro smart band, likely to be called the Xiaomi Smart Band 10 Pro. The information comes from tipster Digital Chat Station, who says the device could arrive as early as May 2026.
The band is expected to come in a range of colors, including black, white, silver, orange, and pink. What stands out, though, is a white ceramic version. That is not something we usually see in this segment, and it could give the wearable a slightly more premium feel.
Build quality is “quite good,” according to the tipster. The regular version reportedly weighs under 40 grams, while the ceramic variant goes over 50 grams, which makes sense given the material.
For some context, the Band 9 Pro launched back in October 2024 with a 1.74-inch AMOLED display, slim bezels, and up to 21 days of battery life. It was much lighter at just 24.5 grams, so the near doubling in weight suggests Xiaomi may be trading some comfort for improved build, battery life, and additional features.
As for what is new this time, details are still limited. The Band 10 Pro is expected to bring some improvements in design and possibly display or health tracking.
The timing is interesting. Xiaomi is also rumored to be preparing the Xiaomi 17 Max for a late May launch, so there is a chance both devices could be announced together.
For now, this is still based on leaks, but if accurate, the addition of a ceramic option could help Xiaomi push the Mi Band slightly further upmarket without moving away from its usual value-focused positioning.
Motorola has introduced a Brilliant Collection version of the Motorola Signature, giving its ultra-premium phone a design built around Swarovski crystals, a Pantone color finish, and sustainability claims. The company has also launched the Moto Buds 2 Plus in the same new design.
The new edition uses PANTONE Violet Indigo with a silk-inspired rear material. Motorola says the design is inspired by constellations, with 20 hand-placed amethyst Swarovski Crystals arranged in a 3D-quilted pattern. The crystals are meant to catch light as the phone moves, while the darker violet finish gives the device a night-sky look.
This launch is part of Motorola Collections, a platform the company uses for limited design-led versions of select devices. Earlier collections included a Swarovski crystal edition in August and a FIFA World Cup 26 Collection.
The Motorola Signature itself sits in the brand’s high-end portfolio. Motorola says the phone offers what DXOMARK ranked as the best camera in its category. It is powered by the Snapdragon 8 Gen 5 Mobile Platform and includes what Motorola describes as the largest battery in its category among ultrathin phones.
The Brilliant Collection model also carries several durability and sustainability details. Motorola says the device uses more than 63 percent recycled metals and 100 percent recycled aluminum in the mid-housing. It also includes recycled plastics, with the upper speaker bracket made from 65 percent post-consumer recycled plastic and 20 percent Ocean Bound Plastic.
The phone uses silicon-carbon battery technology and is rated for a 1200-cycle battery life. Motorola says this helps maintain battery performance without affecting the ultrathin design. For durability, the device meets MIL-STD-810H military-grade standards, carries IP68 and IP69 ratings, and uses Corning Gorilla Glass Victus 2 for added protection.
Pricing & availability
The Motorola Signature and Moto Buds 2 Plus from the Brilliant Collection will be released in the coming weeks. In the UK, the bundle is priced at £1,199, which is around $1,616.
Xiaomi has officially teased its upcoming PC peripheral, the Xiaomi Gaming Mouse 2. According to a recent post from the company’s Weibo account, the new mouse is being developed with competitive players in mind, featuring what the company describes as esports-level tuning.
While the complete specifications haven’t been shared just yet, the promotional materials confirm that the device will be equipped with a new flagship sensor from PixArt. The exact model of the sensor remains unannounced.
Alongside the PixArt hardware, the mouse will include a high-end controller to manage inputs. Xiaomi’s current marketing for the device focuses on reliability and accuracy, using the tagline: “Precision earns you a spot. Stability wins you the game.”
To get an idea of what the Gaming Mouse 2 might offer, it is helpful to look at the company’s previous release. In September 2024, Xiaomi launched the Mouse X1. That model featured a lightweight 65-gram design and an optical sensor capable of 26,000 DPI. It also supported an 8,000Hz polling rate for quicker response times.
For battery life, the X1 included a 530mAh battery, which provided up to 110 hours of wireless use when connected via its 2.4 GHz USB receiver at a standard 1,000Hz polling rate.
Given the hardware included in the X1, the Gaming Mouse 2 will likely build on that foundation with the updated PixArt sensor and controller. Xiaomi hasn’t shared pricing or a specific release date yet, noting only that the device is coming soon. More technical details should become available as the launch approaches.
For more daily updates, please visit our News Section.
HP has launched new hardware in its HyperX gaming line, including a new controller and a refresh of the Cloud Stinger 3 headsets.
The new controller is called the HyperX Clutch Talon, which has tool-free customization, interchangeable sticks, D-pads, triggers, and back paddles. HP also says users can extend customization through 3D-printable parts.
The controller uses Hall Effect sticks and triggers, which are designed to reduce drift and improve precision during gameplay. It also includes three-stage trigger locks and reprogrammable back paddles for faster inputs. Platform support covers PC, Android, and Xbox, while dual wireless connectivity and up to 30 hours of battery life round out the feature set.
HP has also introduced the HyperX Cloud Stinger 3 and CloudX Stinger 3 headsets. The lineup includes wired and wireless options, with low-latency 2.4GHz wireless support on select models and Bluetooth support on the wireless version. The headsets feature stainless steel headband sliders, a lightweight build, memory foam ear cushions, and a noise-cancelling microphone with mute controls.
Battery life is one of the main upgrades on the Cloud Stinger 3 Wireless, which is rated for up to 80 hours. The headset family is built around comfort and durability, while keeping the entry price lower than many gaming headsets.
HP is also moving its HyperX NGENUITY software out of beta after an extended testing phase. The platform adds deeper control over HyperX gear, including audio tuning, microphone settings, device performance, and personalization tools.
The latest NGENUITY Audio Engine is powered by HEAR360 and includes parametric and graphic equalizers, game and chat balance, advanced spatial audio, and spatial chat. It also supports real-time dynamic microphone processing, voice monitoring, EQ presets, and AI noise reduction. Performance controls include adjustable actuation points, Rapid Trigger sensitivity, SOCD options, and mouse sensor tuning. Users also get a customizable dashboard, searchable remapping, and macro recording.
Pricing & availability
The HyperX Clutch Talon Controller is expected this summer on HyperX.com for $159.99. The Cloud Stinger 3 headsets are available now on HyperX.com starting at $49.99. NGENUITY is available to download today.
For more daily updates, please visit our News Section.
Headphone Zone has teamed up with ddHiFi to launch two new budget in-ear monitors in India. The Iris is priced at Rs. 2,999, while the Skyfall costs Rs. 3,999. Both models have been built for audiophiles and are available through Headphone Zone’s website.
The two IEMs were developed with Demond Ding, founder of ddHiFi. Headphone Zone says the project started with a simple question. Did India really need another budget IEM, or could the segment get something more interesting at an entry-level price?
Iris and Skyfall are built around a fully solid 3D-printed medical-grade resin shell. This type of construction is usually found on more expensive IEMs, including the Moondrop Blessing 3 and DITA Audio Project M. Headphone Zone is also using hand-painted marbled faceplates sealed under clear resin. Iris comes in marbled green, while Skyfall gets a marbled blue finish. Since the patterns are made by hand, each pair will look slightly different.
The Iris is the simpler of the two. It uses a single 10mm dynamic driver with a beryllium-plated diaphragm. Its tuning focuses on vocals and instruments, instead of the usual bass-heavy sound many budget IEMs chase. Headphone Zone says the Iris is better suited for rock, acoustic, pop, R&B, and jazz. It ships with a 3.5mm silver-plated OFC cable and uses a 0.78mm 2-pin connector. The company also says it pairs naturally with the Headphone Zone X ddHiFi Hi-Res DAC.
Skyfall sits slightly higher in the lineup and costs Rs. 3,999. It uses a hybrid setup with one 10mm nano-titanium dynamic driver and one custom balanced armature. A two-way crossover handles the pairing through electronic RC components and acoustic design. The sound is tuned to be warm, full-bodied, and smoother at the top end, making it better suited for longer listening sessions. Headphone Zone lists cinematic music, soundtracks, hip-hop, and electronic music as its ideal use cases.
Skyfall also gets a 4.4mm balanced high-purity silver-plated OFC cable with an aluminium shell. It is designed to pair with the Headphone Zone X ddHiFi Hi-Res DAC Pro.
For more daily updates, please visit ourNews Section.
There is an interesting leak about the Galaxy S27 Ultra’s camera system. Samsung may be removing a camera instead of upgrading it.
Samsung moved to a dual telephoto setup with the Galaxy S21 Ultra, enabling long-range zoom on its flagships. That shift is a big part of why the S Ultra lineup is still considered among the most capable camera phones today. It helps maintain clarity across different zoom levels without relying too heavily on cropping from the main sensor. If you haven’t guessed it already, the 3x telephoto lens is expected to be removed on the S27 Ultra.
According to reliable tipster Ice Universe, the 200MP main sensor will take on more of the workload. What does that actually mean? The main sensor would need to maintain image quality as you crop in, up to around 5x, where the periscope telephoto would take over.
While the 200MP figure still sounds impressive, there is a reason the Galaxy S26 Ultra uses 16-to-1 pixel binning, combining data from 16 pixels into one. The result, as you know, is a 12MP output. The phone can either crop into the 12MP binned output, or use the full 200MP image for more detail when zooming, which can introduce noticeable noise, especially in moderate to low light.
There is a third option, which is to rely on AI to manage that noise. But that approach also has its limits, often introducing artifacts. That is why Chinese smartphone makers like Oppo and Vivo are bundling their flagships with physical teleconverters instead of pushing digital zoom too far on 200MP sensors.
There have also been reports suggesting Samsung could use a larger 1/1.12-inch 200MP ISOCELL sensor, which would help with image quality overall. However, based on past trends, a significantly larger 200MP sensor from Samsung itself does not seem very likely either. The company started with the 1/1.22-inch ISOCELL HP1 in 2021, and this year’s HP5 measures 1/1.56-inch.
So why remove the 3x telephoto in the first place? A refreshed camera layout is reportedly being considered, and the reason may be the addition of magnets for Qi2 compatibility. Removing the 3x lens could free up internal space for a proper magnetic ring and better accessory support.
That leads to a bigger question. What matters more here: camera versatility or Qi2 and magnetic accessories? Or is this simply a cost-saving decision that also enables a new design direction?
Sony has launched the HT-B500 soundbar in China, a 3.1-channel audio system designed to enhance home entertainment setups. The soundbar is now available on JD.com at a price of 2,341 yuan ($342).
Sony HT-B500 Specifications
The Sony HT-B500 soundbar features a 3.1-channel audio configuration with a front-facing physical three-channel setup. It comes with a dedicated center channel speaker that enhances vocal clarity. The system also includes a powerful wireless subwoofer, which is engineered to produce deep and impactful bass.
The soundbar supports advanced audio formats such as Dolby Atmos and DTS:X. It equips Sony’s Vertical Surround Engine (VSE), which simulates overhead audio without requiring additional ceiling speakers. Alongside this, it features S-Force Pro Front Surround technology, which expands the soundstage horizontally.
Sony also integrates its one-touch 3D upmix surround technology into the HT-B500. This feature intelligently processes standard stereo or 2-channel audio sources and converts them into a more immersive 3D surround sound output. As a result, even streaming content with basic audio can feel richer and more spatial. The soundbar further comes with AI Voice Enhancement 3.0, which separates dialogue from background noise in real time.
In terms of connectivity and usability, the soundbar supports Bluetooth 5.3, enabling wireless audio streaming from smartphones, tablets, and laptops. It equips DSEE (Digital Sound Enhancement Engine) technology, which enhances compressed audio files by restoring lost details for improved sound quality. The device also features HDMI eARC output and optical input.
The HT-B500 sports a slim and minimalist design with a metal grille and rounded edges, making it suitable for both wall mounting and tabletop placement. It comes with a compact form factor that allows flexible placement in different room setups.
If you are still using the OnePlus 11 in 2026, it has aged well. The phone is now over 3 years old and likely still handles everyday tasks without much friction. Apps open quickly, scrolling feels smooth, and the charging speed is what you can rely on. In a lot of ways, the OnePlus 11 might not feel like a 2023 smartphone or outdated per se.
However, now is the right time to upgrade from it since it’s more about what happens next.
The upcoming OxygenOS 17 is expected to be its last major update for the OnePlus 11. That means it will no longer be moving forward with future Android versions.
At the same time, the Snapdragon 8 Gen 2 inside the OnePlus 11 is now a few generations behind. You might not feel the difference immediately, but it will start to appear in small ways, if it hasn’t. And it could be anything from slightly longer load times, less efficient battery use, or fewer performance gains in newer apps and games.
None of this makes the OnePlus 11 unusable. It just makes it easier to justify moving on.
What to look for if you’re coming from a OnePlus 11
If you’ve used a OnePlus phone for a while, your expectations are pretty clear, even if you don’t think about them directly.
You expect fast charging that actually changes how you use the phone. Plug in for a few minutes, and you’re good again. You expect performance that doesn’t need explaining. No stutters. No weird slowdowns. And you expect software that doesn’t constantly get in your way.
You might get that combination in the OnePlus ecosystem itself. Or if you want to move, we have those options too.
The List: OnePlus 15R
The OnePlus 15R could be an easy upgrade because you are sticking to the known OnePlus ecosystem. It runs on Snapdragon 8 Gen 5, which is a noticeable jump from the 8 Gen 2. Not just in peak performance, but in how stable everything feels. Its thermal management is also better if you are into gaming.
More importantly, you get a 48% bigger battery at 7400mAh.Even the charging is fast here at 120W, with 50% charging claimed in 15 min.
Moving on, the 15R also has a 165Hz AMOLED panel. In comparison, the OnePlus 11 has a 120Hz panel. While the difference may not be noticeable immediately since few apps support a 165Hz refresh rate, games like Call of Duty Mobile, Clash of Clans, Brawl Stars, and Real Racing 3 are optimized to make use of it.
Key Specs:
Snapdragon 8 Gen 5
7,400mAh battery
165Hz AMOLED display
55W fast charging
OxygenOS 16
Why OnePlus 11 users will like it: It feels familiar in the ways that matter. Fast, smooth, predictable. You don’t need to relearn anything.
Why they won’t: The cameras are fine. Not bad. But this isn’t the phone you buy if you’re obsessed with photography.
iQOO 15R
The iQOO 15R is the performance-focused alternative. Internally, it’s nearly identical to the OnePlus. Same chipset, same general performance ceiling. Even the camera setup mirrors the OnePlus. It has a 50MP main, 8MP ultrawide, and again, no telephoto. This seems to be a consistent trade-off across this segment.
The battery size is even bigger here at around 7,600mAh, and charging goes up to 100W. So just plug it in, and it fills up quickly.
The difference here is the display, which is a 144Hz AMOLED panel. Slightly lower refresh rate than the OnePlus options, but not something most people will notice.
Key Specs:
Snapdragon 8 Gen 5
~7,600mAh battery
144Hz AMOLED display
100W fast charging
Long software support window
Why OnePlus 11 users will like it: It delivers the same “fast and practical” experience, but with even bigger numbers.
Why they won’t: Software experience feels different, and the cameras are average.
Motorola Signature
The Motorola Signature is the outlier here. It’s thinner, lighter, and more design-focused than most phones in this category.
It still runs a Snapdragon 8 Gen 5 with 16GB RAM and 512GB storage as standard. What stands out is the design. It’s thinner than most phones in this category, lighter, and still manages to include a high-brightness display and strong durability ratings.
Key Specs:
Snapdragon 8 Gen 5
16GB RAM, 512GB storage
165Hz display
IP68/IP69 rating
Premium lightweight design
Why OnePlus 11 users will like it: It keeps a relatively clean Android experience, and it feels different in a good way.
Why they won’t: It’s expensive. And it doesn’t lean into fast charging the way OnePlus does.
Realme Neo 8
The Realme Neo 8 is another phone running on the same Snapdragon platform, but it’s closer to a flagship in terms of features.
The display is a 6.78-inch AMOLED panel with a 165Hz refresh rate and an unusually high peak brightness rating of 6500 nits. More importantly, this is one of the few phones here with a proper telephoto lens.
Its 50MP periscope camera offers 3.5x optical zoom, alongside a 50MP main sensor and an 8MP ultrawide. This alone makes it more versatile than the OnePlus and iQOO options.
Its battery capacity is also larger at 8000 mAh. The charging, however, is a bit slow at 80W, but given the battery size, it’s still practical. There’s also an RGB LED on the back for some extra visual flair.
Key Specs:
Snapdragon 8 Gen 5
16GB RAM, 1TB storage
165Hz display
IP68/IP69 dust and water resistance
RGB LED design with glass back and metal frame
Why OnePlus 11 users will like it: The camera system is more versatile, especially with the periscope zoom. The battery is big, too, and the display is bright and smooth, without any inconsistency.
Why they might not: Charging is slower than that of the OnePlus 11, and the RGB lighting and overall design might feel a bit loud if you prefer something minimal.
Best overall pick for a OnePlus 11 user
For most people, the answer is the OnePlus 15R.
Not because it’s the most powerful. It isn’t. Not because it has the best camera. It doesn’t.
It’s the best because it feels like a continuation. You get a much newer chip, a significantly larger battery, and the same general experience you’re already used to. There’s no adjustment period. No trade-offs that feel surprising.
For more daily updates, please visit our News Section.
OpenAI might be looking beyond just software. A new report suggests the company is exploring an “AI agent phone,” and the idea behind it is quite different from how smartphones work today.
The details come from analyst Ming-Chi Kuo, who claims OpenAI is thinking about a device where you don’t really move between apps the way you normally would. Instead, a built-in AI agent handles tasks for you, end to end.
So rather than opening your calendar, checking messages, and switching between apps to plan something, you would just ask. The AI would figure out the rest, pulling in the right information, suggesting options, and even completing actions if needed. It sounds simple on paper, but it is a big shift from the current app-based model.
We have seen early attempts at this before. The Rabbit R1 tried to reduce reliance on apps, though in a much more limited way. What OpenAI is reportedly working on seems more ambitious, basically bringing that idea into a full smartphone rather than a companion gadget.
On the hardware side, the report mentions collaborations with MediaTek and Qualcomm to build a chip that is better suited for AI-heavy tasks. Manufacturing could be handled by Luxshare, which already works with large-scale consumer electronics.
That said, this is not something arriving anytime soon. Kuo suggests specs and suppliers could be finalized around late 2026 or early 2027, with production possibly starting in 2028. So even in the best case, this is still a few years out.
There are also some obvious hurdles. Replacing apps, or even just reducing their role, means dealing with a lot of existing ecosystems and habits. People are used to how phones work, and changing that is not easy.
Still, if this direction holds, it gives a glimpse of where things might be heading. Less tapping through apps, more just asking for what you want and letting the system handle it.
Skyworth has officially released the A9H Wallpaper TV, a high-end RGB Mini LED television with an ultra-slim body. The TV is available in two sizes, 75 inches and 85 inches, and is priced at 10,499 yuan ($1,538) and 11,499 yuan ($1,684) respectively.
Skyworth A9H Wallpaper TV Specifications
True to its Wallpaper TV moniker, the A9H boasts an ultra-slim, 3.9cm-thin body that sits perfectly flush against the wall when mounted. It features a sleek 90-degree flat frame design, resembling a minimalist picture frame and offering a deliberately artistic touch to modern living spaces. The TV supports both true flush mounting and recessed installation.
Skyworth equips the A9H with a 4K RGB Mini LED panel featuring a resolution of 3840 x 2160 pixels. The 75-inch model includes 3,168 local dimming zones, while the 85-inch version offers 4,350 zones.
The TV supports a peak brightness of up to 4,500 nits and a refresh rate of up to 300Hz. Skyworth claims the display achieves 103% of the BT.2020 color gamut, offers a color accuracy of less than ΔE 0.6, and delivers a color volume of 140%.
The company integrates its Chameleon AI picture quality chip S7 to improve clarity, color accuracy, and brightness with real-time processing and AI light control. It also features a dual-layer anti-glare coating and wide viewing angle compensation for reduced reflections and consistent colors from any position.
Skyworth has partnered with Harman Kardon for a 7.1.2-channel sound system with dual soundbars and a maximum output of 270W.
In terms of system functionality, the A9H operates on a Coolita-based OS with AI-powered voice control and content recommendations. It offers access to over 1,000 artworks via an art display mode and gaming features like VRR and ALLM.
Skyworth designed the A9H with eye comfort in mind, reducing harmful blue light by up to 75% and eliminating flicker. Both models include 4GB of RAM and 64GB of storage, with USB expansion support for up to 2TB of additional storage.
For connectivity, these include HDMI 2.1, USB 3.0, AV input, RF input, and Ethernet port.
In related news, TCL recently announced the A400 Pro NXTVISION TV for Europe, featuring a 4K QD-Mini LED display with a 144Hz refresh rate.
For more daily updates, please visit our News Section.
Motorola recently unveiled the Motorola Edge 70 Pro in India. The Rs 38,999-priced phone packs a massive 6.8-inch AMOLED 144Hz screen, a Dimensity 8500 chip, 50-megapixel dual rear cameras, and a 6,500mAh battery. While the Edge 60 Pro from last year featured a telephoto camera, the Edge 70 Pro arrives without one.
The brand has now launched a slew of new phones for the global market, such as the Moto G37, Moto G37 Power, Moto G47, Moto G87, Razr 70, Razr 70 Plus, and Razr 70 Ultra. Alongside these devices, the Lenovo-owned brand has also unveiled the global version of the Edge 70 Pro. Here’s a look at how it differs from the Indian edition.
Global Motorola Edge 70 Pro specifications and price
Motorola Edge 70 Pro (Global)
Priced at 799 euros in Europe, the global version of the Motorola Edge 70 Pro features a 6.78-inch AMOLED panel offering a 1.5K resolution and up to 5000 nits of peak brightness. Under the hood, it features the Dimensity 8500 Extreme chip, paired with 12GB of LPDDR5X RAM and 512GB of UFS 4.1 storage.
It also supports 15W wireless charging and 10W reverse wireless charging, in addition to 90W wired charging for its 6,500mAh battery. The device supports eSIM + nano SIM functionality.
For photography, it features an additional 50-megapixel periscope telephoto camera with 3.5x optical zoom, alongside a 50-megapixel ultra-wide lens and a 50-megapixel primary camera. The global version measures 7.19mm in thickness and comes in four Pantone shades: Chicory Coffee, Zinfandel, Lily White, and Titan.
Motorola Edge 70 Pro (Global)Motorola Edge 70 Pro (Global)Motorola Edge 70 Pro (Global)Motorola Edge 70 Pro (Global)
In comparison, the Indian version of the Edge 70 Pro supports up to 5200 nits of brightness, and its display size is officially listed as 6.8 inches. It packs the same chipset and is available in 8GB and 12GB RAM variants with 256GB of internal storage. It houses the same battery but lacks wireless charging support. The Indian version also misses out on the periscope telephoto camera and eSIM support.
Motorola Edge 70 Pro Plus for the Indian market?
Recent reports have revealed that the Indian market may receive another model called the Motorola Edge 70 Pro Plus. In all likelihood, this model could be a rebranded version of the global Edge 70 Pro.
For more daily updates, please visit our News Section.
While most smartphones today can record audio and even generate AI-based transcripts, relying on a phone for long meetings or interviews is not always ideal. Notifications, incoming calls, battery drain, and limited recording flexibility can quickly become distractions. That is where the itel Zeno AI Weaver comes into play. Instead of juggling multiple apps, it combines recording, transcription, translation, and AI-generated summaries into a compact standalone gadget designed specifically for capturing conversations and turning them into organized notes.
Slim design that fits anywhere
itel Zeno AI Weaver
The first thing that stood out to me was the size. The recorder is the exact size of a standard debit or credit card, making it incredibly easy to carry around. It is also slim enough to slide into a pocket without adding bulk. Despite its compact form factor, the build does not come across as cheap and still feels sturdy in hand.
The bundled leather case adds a more premium feel while also protecting the device during daily use. It also includes a cutout at the bottom, allowing the charging connector to attach directly to the pogo pins on the recorder without removing the case.
One of the more practical additions is MagSafe compatibility. I used it attached to the back of the Motorola Signature during a couple of meetings, and it stayed securely in place. This made it easier to carry around compared to traditional bulky voice recorders.
itel Zeno AI Weaveritel Zeno AI Weaver
The front features a small display that shows the recording and battery status, with buttons positioned on either side of the device. The recessed button on the right acts as the power/function button. To power it on, you can press it once, while a long press of around seven seconds turns it off. Once the device is powered on, a long press on this button starts or stops recording, and the recorder vibrates to confirm the action. Since it is a multifunction button, you can also tap it once to check the battery and Bluetooth connection status.
Meanwhile, the switch-like button on the left is used to toggle between Call and Meeting modes. It is worth noting that switching modes while a recording is in progress automatically stops the ongoing recording. Personally, I found the Meeting mode more useful, as it recorded voices with better clarity.
Recording quality is surprisingly clear
itel Zeno AI Weaver
A voice recorder is only as good as its audio capture, and this is where the Zeno AI Weaver performed well. During testing, I used it in different environments, including a quiet room, a noisy café, and a crowded media briefing.
The multi-microphone setup with noise reduction did a good job isolating voices. Background chatter was reduced to a manageable level, making conversations easier to understand during playback. Even when multiple people spoke during meetings, voices remained reasonably clear.
The one-touch recording feature is convenient. Instead of opening an app and navigating through menus, I could simply start recording instantly. For journalists or professionals who need to capture sudden conversations quickly, this can be genuinely useful.
Battery life also turned out to be dependable. I did not need to charge it frequently during my usage period, and the claimed long standby time appears realistic for moderate users.
AI transcription makes the biggest difference
itel Zeno AI Weaver
The main reason to consider this recorder is its AI functionality. Through the companion AI Recorder app, recordings are automatically converted into text. I tested it with interviews and meeting discussions, and the transcription accuracy was fairly reliable in clear speaking conditions.
What I liked most was the flexibility of the summaries. Instead of getting only raw transcripts, the app can organize recordings into different formats such as meeting minutes, interview highlights, task lists, and structured notes.
For work-related discussions, this saved a surprising amount of time. Instead of replaying long recordings repeatedly, I could quickly scan the generated summaries and key points.
The translation support is also useful. I tested recordings containing mixed English and Hindi conversations, and the results were decent enough for reference purposes.
The app experience
itel Zeno AI Weaver
The AI Recorder app by Turing Intelligence acts as the control center for the device. Pairing was straightforward, and syncing recordings did not take long.
Inside the app, recordings are neatly organized with transcripts and summaries available in one place. Users can select a recording and tap on AI Templates to access options such as Brief Summary, Meeting Minutes, Bulleted Notes, Interview Notes, Follow-Up Email, Presentation, Create To-Dos, and more. Sharing files is simple, and exporting text-based summaries is useful if you need to send meeting notes quickly.
To view a translated version of a recording, users can open a recorded file, tap on View Transcript, and then select Translate from nearly 40 supported languages.
However, the biggest limitation is the subscription model. The itel Zeno AI Weaver comes with a free tier that includes up to 300 minutes of AI transcription and summaries per month, which should be enough for casual users or occasional meetings. However, users who rely heavily on transcription may need to consider the paid plans.
The Pro subscription, priced at around Rs 1,350 per month, unlocks features such as speaker identification, translation support, enhanced transcription accuracy, advanced AI summaries, and up to 1,200 transcription minutes per month. There is also an Unlimited plan priced at roughly Rs 2,050 per month that removes transcription limits altogether while adding extended cloud-based features.
As for the hardware itself, the recorder is currently available on Amazon India for around Rs 11,819. That additional subscription cost is something buyers should keep in mind before investing in the device.
Storage and usability
itel Zeno AI Weaver
The itel Zeno AI Weaver comes with 32GB of internal storage, which the company claims is enough for up to 40 hours of recordings stored directly on the device. The offline recording capability is another advantage because the recorder does not rely entirely on internet connectivity to capture audio.
I also appreciated that it works as a dedicated tool. While smartphones already offer recording and transcription features, having a separate device means fewer distractions and better focus during conversations.
Final thoughts
The itel Zeno AI Weaver feels less like a traditional recorder and more like a compact productivity assistant. Its biggest strengths are portability, clean audio capture, and AI-powered transcription tools that genuinely reduce manual work.
I would have appreciated a simpler and more direct name, such as “itel Zeno AI Recorder,” as it would immediately communicate what the product actually does. The term “Weaver” feels more abstract and may not instantly connect with users looking for an AI-powered voice recorder.
It is not a cheap purchase, especially once subscription costs are considered, but for journalists, students, researchers, and professionals who regularly deal with long conversations or meetings, it can become a useful everyday companion.
If your workflow involves constant note-taking, interviews, or discussions that need documentation, the Zeno AI Weaver offers a more efficient way to manage them without constantly staring at a notebook or phone screen.
For more daily updates, please visit our News Section.
Xgimi has officially launched the X50 Ultra and X50 Ultra Max projectors in China, marking its latest addition to the premium home theater market. The X50 Ultra starts at 15,499 yuan ($2,266), while the X50 Ultra Max is priced at 19,499 yuan ($2,850). Both models feature high-end specs, including 4K resolution, advanced image processing, and RGB pure laser light sources.
Xgimi X50 Ultra and X50 Ultra Max Specifications
The X50 Ultra Max uses a DLP projection system powered by a new 0.47-inch DMD chip with SST architecture. The projector delivers native 4K resolution at 3840 x 2160.
It achieves up to 7000 CVIA brightness and a native contrast ratio of 10,000:1, which increases to 100,000:1 with dynamic contrast processing. Xgimi equipped this projector with its self-developed X-Vision image processing chip, which uses intelligent optimization to enhance picture quality in real time.
The projector includes a bionic stepless aperture system (F/2.0 to F/7.0) for enhanced contrast and depth, along with a 70mm high-transmittance optical lens for optimal light efficiency and clarity. It offers a throw ratio of 0.98-2.0:1 with lossless optical zoom, preserving image quality at varying distances.
For sound, the projector features dual 12W Harman Kardon speakers with Dolby and DTS support. It is IMAX Enhanced and certified for Dolby Vision and HDR Vivid. The device supports gaming at 1080p with a 240Hz refresh rate and 4K at 60Hz, along with VRR and ALLM for low-latency performance.
The X50 Ultra shares many features with the Ultra Max but reduces brightness to 6000 CVIA and contrast to 9000:1 (90,000:1 with dynamic contrast). It uses the same MediaTek MT9681 processor, 4GB RAM, and 64GB storage. The system runs on GMUI 6 and supports multi-screen interaction through AirPlay, DLNA, and the Xgimi app.
Xgimi equipped both models with a wide array of ports, including three HDMI (one with eARC), USB 3.0, USB 2.0, optical audio out, LAN, and a standard audio jack. For wireless connectivity, these support Wi-Fi 6 and Bluetooth 5.2.
Xgimi designed the projectors with an all-metal chassis and a vertical grille design. Both models also support flexible placement with a vertical lens shift of ±130% and horizontal shift of ±50%. The devices operate at a noise level of up to 28dB and weigh 8.2 kg for the Ultra Max and 7.6 kg for the Ultra.
Flagship smartphones in this price range are no longer just about specs; they’re about personality and priorities. The Oppo Find X9s Pro and iQOO 15 take two very different approaches despite sitting at a similar price point in India. One leans heavily into camera innovation and a refined, compact feel, while the other pushes raw power, display tech, and performance-focused features. This comparison matters for buyers who want clarity between a balanced flagship experience and a spec-driven powerhouse, especially when both options look equally compelling on paper.
Major Features:
Feature
Oppo Find X9s Pro
iQOO 15
Winner
Display Type
LTPO AMOLED, 144Hz, 1800 nits peak
LTPO AMOLED, 144Hz, Dolby Vision, 6000 nits peak
iQOO 15 – Much brighter + better HDR support
Display Resolution
1216 × 2640 (~460 ppi)
1440 × 3168 (~508 ppi)
iQOO 15 – Sharper and higher resolution
Chipset
Dimensity 9500 (3nm)
Snapdragon 8 Elite Gen 5 (3nm)
iQOO 15 – More powerful CPU & GPU
GPU
Immortalis-G925
Adreno 840
iQOO 15 – Stronger graphics performance
RAM & Storage
Up to 16GB / 1TB, UFS 4.1
Up to 16GB / 1TB, UFS 4.1
Tie – Same configurations
Main Camera
200MP + 200MP (tele) + 50MP UW
50MP + 50MP (periscope) + 50MP UW
Oppo – Higher resolution + dual 200MP
Zoom
2.8x optical
3x optical (periscope)
iQOO 15 – Better optical zoom
Selfie Camera
32MP, 4K video
32MP, 4K video
Tie – Same specs
Video Recording
8K, 4K@120fps, Dolby Vision
8K, 4K@60fps
Oppo – Higher frame rate + Dolby Vision
Battery
7025 mAh
7000 mAh
Oppo – Slightly larger
Wired Charging
80W
100W
iQOO 15 – Faster charging
Wireless Charging
50W
40W
Oppo – Faster wireless
Build Protection
IP66/IP68/IP69
IP68/IP69
Oppo – Extra IP66 rating
Audio
Stereo speakers
Stereo + Hi-Res + Snapdragon Sound
iQOO 15 – Better audio support
Connectivity
Wi-Fi 7, BT 6.1
Wi-Fi 7, BT 6.0
Oppo – Newer Bluetooth
USB
USB-C (OTG)
USB-C 3.2 (OTG)
iQOO 15 – Faster data speeds
Special Features
Hasselblad tuning, XPAN
Bypass charging, color-changing back
Tie – Different advantages
Disclaimer: Specs are based on available data. Actual performance may vary. Verify details from official sources before buying.
Design and Display
Build and Feel
The Oppo Find X9s Pro leans toward a compact flagship approach with a refined, premium build and strong IP ratings, making it feel more manageable and comfortable for daily use. The iQOO 15, on the other hand, takes a bolder route with a larger footprint, premium materials, and even a color-changing rear panel option that adds visual flair. Both devices offer solid durability, but the iQOO feels more experimental, while the Oppo feels more polished and practical.
Display Quality
The Oppo features a sharp LTPO AMOLED panel with a 144Hz refresh rate and good peak brightness, delivering smooth visuals and balanced colors. However, the iQOO 15 pushes things further with higher resolution, significantly higher peak brightness, and support for Dolby Vision and advanced HDR formats. This results in a more immersive and vibrant viewing experience, especially for streaming and gaming.
Verdict
The Oppo Find X9s Pro is better suited for those who prefer a compact, balanced flagship feel. The iQOO 15 stands out for display excellence and visual impact, making it the more immersive option overall.
Specifications Including Battery
Performance
The Oppo Find X9s Pro runs on the Dimensity 9500, delivering flagship-level performance with strong efficiency and smooth multitasking. It feels fast and reliable for most users. The iQOO 15, powered by the Snapdragon 8 Elite Gen 5, clearly targets peak performance with higher clock speeds and a more powerful GPU. This translates into better sustained gaming performance and future-proofing. The difference is noticeable under heavy workloads, where the iQOO pulls ahead.
Battery and Charging
Both phones pack large silicon-carbon batteries, but Oppo slightly edges ahead in capacity. Still, iQOO compensates with faster 100W wired charging and useful features like bypass charging, which is especially beneficial for gamers. Oppo’s wireless charging is faster, making it more convenient for mixed usage. Each takes a different approach—one prioritizes endurance, the other flexibility and speed.
Verdict
The iQOO 15 is the stronger performer with better raw power and charging versatility. The Oppo Find X9s Pro remains a solid choice for balanced performance and slightly better battery endurance.
Camera
Main and Secondary Lenses
The Oppo Find X9s Pro takes a bold approach with dual 200MP sensors, focusing heavily on detail, zoom clarity, and advanced imaging features like Hasselblad tuning. It delivers a more “flagship camera-first” experience with strong computational photography. The iQOO 15 uses a triple 50MP setup with a periscope lens, offering consistent performance across all lenses. While it may not match Oppo’s sheer resolution, it provides reliable color balance and versatility. Oppo feels more experimental and premium, while iQOO feels controlled and consistent.
Selfie Camera
Both devices feature similar 32MP selfie cameras with 4K video support. The output is sharp and usable in most lighting conditions, with minimal difference between the two. Oppo’s tuning may lean slightly toward richer tones, while iQOO keeps things more neutral.
Verdict
The Oppo Find X9s Pro is the better choice for those who prioritize high-resolution photography and advanced camera features. The iQOO 15 delivers dependable, all-round camera performance without pushing extremes.
Pricing
The Oppo Find X9s Pro is priced at around $870 (₹73,000), while the iQOO 15 comes in at about $600 (₹73,000). Despite the large gap in USD pricing, both devices fall into a similar price bracket in India due to regional pricing differences, taxes, and market strategies. This makes the comparison more interesting, as buyers in India are essentially choosing between two differently positioned flagships at the same cost.
Value for Money
At this price point, the iQOO 15 offers exceptional value with a more powerful chipset, superior display, and faster charging. It feels like a performance-focused flagship at a competitive price. The Oppo Find X9s Pro justifies its pricing through premium camera hardware, compact design, and a more refined overall experience. It appeals more to users who prioritize photography and usability over raw specs.
Verdict
The iQOO 15 delivers better value on paper, especially for performance-focused users. The Oppo Find X9s Pro feels worth it for those who prioritize camera innovation and a more balanced flagship experience.
Disclaimer: While the iQOO 15 and OPPO Find X9s Pro share an identical base launch price of ₹72999 in India, their market positioning differs. The iQOO 15 is frequently available at a lower effective price through aggressive bank offers and discounts, whereas the OPPO Find X9s Pro often maintains its premium pricing and scales significantly higher for top-tier storage variants. Actual prices may vary based on retailer, current promotions, and specific model configurations.
Conclusion
Oppo Find X9s Pro stands out with its dual 200MP camera system, Hasselblad enhancements, and compact flagship approach. It feels like a device designed for photography enthusiasts who also want a manageable form factor. The iQOO 15, meanwhile, focuses on raw power, next-gen display technology, and gamer-friendly features like bypass charging. Its feature set feels more aggressive and performance-driven.
Verdict
iQOO 15 is the better choice for most users, offering stronger performance, a superior display, and better overall value at the same ₹73K price point. The Oppo Find X9s Pro still stands out for its advanced camera system and more refined, compact feel, but unless photography is the top priority, the iQOO 15 makes more sense as a complete and future-proof flagship.
Disclaimer: This comparison is based on the specifications provided and is intended for general informational purposes. Actual performance, camera results, battery life, and overall experience may vary depending on real-world usage, software updates, and individual preferences.
The Realme 16 series already has three members, and it’s soon set to become four. The upcoming Realme 16T has made an early appearance on Geekbench, revealing what we can expect under the hood.
According to the listing, the Realme 16T (model number RMX5268) is powered by the MediaTek Dimensity 6300. That’s actually a downgrade over last year’s Realme 15T, which uses MediaTek Dimensity 6400.
The Geekbench data shows a CPU setup with two performance cores clocked at 2.4GHz and six efficiency cores at 2.0GHz. Graphics duties are handled by the Mali-G57 MC2 GPU. The tested unit comes with 8GB of RAM and runs Android 16.
If that configuration sounds familiar, that’s because it is. The Realme 15T’s chipset, for instance, offered slightly higher clock speeds at 2.5GHz on its performance cores, alongside the same GPU. As a result, the differences here may come down to optimization rather than raw performance.
What else do we know
Outside of benchmarks, earlier leaks from tipster Abhishek Yadav point to multiple variants for the 16T. The phone is expected to ship in three configurations: 6GB RAM with 128GB storage, 8GB with 128GB, and 8GB with 256GB.
As for the design, the phone is said to come in Starlight Red, Starlight Black, and Aurora Green shades. These names don’t confirm much on their own, but they hint at glossy or gradient finishes.
Realme 16
There’s no official launch date yet; however, the phone is expected to arrive as soon as next month.
Alongside it, Realme could also announce the Realme P4R smartphone, which will come in Silver Glare, Titanium Glare, and Lavender Glare. Its base variant could start at 4GB RAM and 128GB storage, with additional options of 6GB/128GB and 6GB/256GB. We will keep you in the loop with new details.
For more daily updates, please visit our News Section.
Choosing between the Oppo Find X9s and Pixel 10 isn’t just about specs; it’s about what kind of smartphone experience matters more. One pushes raw power, battery, and cutting-edge hardware, while the other focuses on software intelligence, camera consistency, and long-term reliability. For buyers in the premium mid-range segment, this comparison highlights whether performance-driven value or refined smart features make more sense in daily use.
Major Features:
Feature
Oppo Find X9s
Google Pixel 10
Winner
Display
6.59″ AMOLED, 1216×2640, 120Hz, 3600 nits peak
6.3″ OLED, 1080×2424, 120Hz, 3000 nits peak
Oppo – Higher resolution & brighter
Protection
Gorilla Glass 7i
Gorilla Glass Victus 2
Pixel – Stronger glass protection
OS
Android 16, ColorOS 16
Android 16, 7 major updates
Pixel – Longer software support
Chipset
Dimensity 9500s (3nm)
Tensor G5 (3nm)
Oppo – Higher clock speeds
Storage
UFS 4.1
UFS 3.1 / 4.0
Oppo – Faster storage standard
Rear Camera
50MP + 50MP (3x) + 50MP UW
48MP + 10.8MP (5x) + 13MP UW
Oppo – Higher resolution sensors
Video
4K@120fps
4K@60fps
Oppo – Higher frame rate
Selfie
32MP, 4K video
10.5MP, 4K video
Oppo – Higher resolution
Battery
7025 mAh
4970 mAh
Oppo – Much larger battery
Charging
80W wired
30W wired + wireless + reverse
Oppo – Faster wired charging
Wireless Charging
No
Yes (15W, Qi2)
Pixel – Wireless support
Connectivity
Wi-Fi 7, Bluetooth 6.1, IR
Wi-Fi 6e, Bluetooth 6.0
Oppo – Newer standards + IR
Extras
Infrared port
Satellite SOS, Circle to Search
Pixel – Unique smart features
Price
$730 / ₹60,000
$800 / ₹70,000
Oppo – More affordable
Disclaimer: Specs are based on available data. Actual performance may vary. Verify details from official sources before buying.
Design and Display
Build and Feel
The Oppo Find X9s leans toward a more rugged and futuristic approach with higher durability ratings, including IP66/IP68/IP69 protection. It feels engineered for tougher environments while still maintaining a premium finish. The Pixel 10, on the other hand, focuses on refined minimalism with Gorilla Glass Victus 2 on both sides and a clean aluminum frame. It looks more polished and subtle, which may appeal to users who prefer a classic flagship aesthetic. The Oppo feels slightly more experimental, while the Pixel feels more mature and balanced.
Display Quality
Oppo clearly pushes boundaries with a larger AMOLED panel, higher resolution, and an impressive peak brightness of 3600 nits. This makes it more immersive and easier to use outdoors. The Pixel 10 counters with HDR10+ support and a more color-accurate OLED panel, though its brightness and resolution are slightly lower. The Pixel’s display feels more tuned for consistency, while Oppo’s feels more aggressive and vibrant.
Verdict
Oppo wins for sheer display power and durability, while Pixel 10 offers a more refined and color-accurate experience.
Specifications Including Battery
Performance
The Oppo Find X9s runs on the Dimensity 9500s built on a 3nm process, paired with UFS 4.1 storage, delivering strong raw performance and faster data speeds. It is clearly optimized for heavy multitasking and gaming. The Pixel 10’s Tensor G5 focuses more on AI-driven performance and efficiency rather than raw power. While it may not dominate in benchmarks, it offers smoother real-world optimization and long-term software support with up to seven Android upgrades. Oppo feels faster under load, while Pixel feels smarter in daily use.
Battery and Charging
Oppo takes a massive lead with its 7025 mAh battery and 80W fast charging, making it ideal for heavy users and quick top-ups. The Pixel 10’s 4970 mAh battery is smaller but adds wireless charging, reverse charging, and bypass charging, improving versatility. Oppo prioritizes endurance, while Pixel focuses on convenience and balance.
Verdict
Oppo wins for performance and battery power, but the Pixel 10 stands out for efficiency and long-term reliability.
Camera
Main and Secondary Lenses
Oppo offers a powerful triple 50MP setup, including a telephoto lens with 3x optical zoom and a strong ultrawide sensor. It delivers consistency across all lenses and supports high frame rate 4K video. The Pixel 10, however, focuses on computational photography with its 48MP main sensor and 5x telephoto lens. Features like Pixel Shift and Ultra-HDR enhance real-world shots significantly. While Oppo provides hardware strength, Pixel leans heavily on software processing, often producing more balanced and natural images.
Selfie Camera
Oppo includes a higher resolution 32MP selfie camera with wider video capabilities, making it more suitable for content creators. The Pixel’s 10.5MP front camera may seem modest, but it benefits from better image processing and consistent color tones. Oppo feels sharper, while Pixel feels more natural.
Verdict
Pixel 10 wins for overall photography experience, while Oppo leads in hardware versatility and video flexibility.
Pricing
The Oppo Find X9s is priced around $730 (₹60,000), while the Pixel 10 comes in higher at approximately $800 (₹70,000). This places Oppo in a more aggressive value position, especially considering its larger battery, faster charging, and stronger hardware specifications. The Pixel 10 justifies its higher price through software support, AI features, and camera optimization.
Is the Price Justified?
Oppo feels like a performance-focused deal, offering flagship-level specs at a slightly lower price. It is clearly aimed at users who want maximum hardware for their money. The Pixel 10, however, feels like a long-term investment with better software longevity and smarter features. The extra cost reflects a more refined ecosystem rather than raw specifications.
Verdict
Oppo offers better value for money, while Pixel 10 justifies its price with software and camera excellence.
Disclaimer: Prices are approximate and may vary based on country, region, launch timing, and applicable taxes. Always check whether the listed price is for a China unit or a global/international variant when purchasing.
Conclusion
The Oppo Find X9s stands out with its massive battery, ultra-fast charging, and powerful hardware setup, making it ideal for power users and gamers. It also includes features like an infrared port and advanced connectivity options that add practical value. The Pixel 10 differentiates itself with long-term Android updates, AI-powered features like Circle to Search, satellite SOS, and a cleaner software experience. It feels more future-proof and ecosystem-driven.
Verdict
Oppo Find X9s is the better choice for users who prioritize performance, battery life, and raw specifications. Pixel 10 is more suitable for those who value camera intelligence, software longevity, and a refined daily experience.
Disclaimer: This comparison is based on the specifications provided and is intended for general informational purposes. Actual performance, camera results, battery life, and overall experience may vary depending on real-world usage, software updates, and individual preferences.
The new Rapoo P101 aims to deliver a premium-style magnetic charging experience without carrying a premium price tag. Priced at Rs 1,299 during the ongoing sale, this 10,000mAh power bank offers Qi2 wireless charging, strong magnetic alignment, and 22W wired fast charging in a compact form factor. I spent some time using it with both the iPhone 17 and the Motorola Signature, and here’s what I found.
Compact design with strong magnetic hold
Rapoo P101 Qi2 magnetic power bank
One of the first things I noticed about the P101 was its magnetic grip. Once attached to the phone, it stays in place properly without shifting around too much. That matters because weak magnetic alignment can easily interrupt wireless charging during daily use.
The power bank itself is fairly compact considering it packs a 10,000mAh battery. At around 189g, it does add noticeable weight to the phone, but it still feels manageable for travel or daily commuting. The rounded edges also make it easier to hold while attached to the device.
Rapoo P101 Qi2 magnetic power bank
Rapoo says it supports MagSafe and Pixelsnap compatibility, which should help it work well with a wide range of compatible devices.
Wireless charging performance
Rapoo P101 Qi2 magnetic power bank
The P101 supports up to 15W Qi2 wireless charging. During my testing with the iPhone 17, the charging speed felt fairly consistent.
I started charging the phone at 20 percent battery, and after 15 minutes, it reached 36 percent. That works out to roughly 1 percent per minute during the test. Considering the iPhone 17 reportedly features a 3,692mAh battery, the wireless charging performance felt decent for a compact magnetic power bank.
Rapoo P101 Qi2 magnetic power bank
The charging experience was also stable. I did not notice random disconnects or interruptions while using it magnetically attached to the phone. However, as can be seen above, the iPhone 17 displayed “slow charger”, which is fairly common with wireless charging accessories and does not necessarily reflect inconsistent performance in day-to-day use.
Wired charging is noticeably faster
Rapoo P101 Qi2 magnetic power bank
Where the P101 becomes more impressive is wired charging. The USB-C port supports up to 22W output with PD and PPS support.
Using wired charging on the iPhone 17, the battery went from 36 percent to 70 percent in 20 minutes, which felt significantly quicker than the wireless mode.
I also tested it with the Motorola Signature, which packs a 5,200mAh battery. Wireless charging performance there was slower, moving from 6 percent to 11 percent in around 20 minutes. However, once again, wired charging delivered much better results, taking the phone from 51 percent to 75 percent in the same 20-minute period.
Rapoo P101 Qi2 magnetic power bank
So while the wireless charging is convenient for casual top-ups, the wired mode is clearly the better option when you need faster charging in a short amount of time.
Useful features for daily use
Rapoo P101 Qi2 magnetic power bank
The P101 also includes useful additions like multiple charging protocol support including PD3.0, PPS, QC3.0, and Apple charging standards.
The P101 has LED indicators that make it easy to understand its charging status at a glance. During use, I noticed that the indicator glows green while charging devices through the wired connection, while a blue light appears during wireless charging
Rapoo has included several safety protections, too, including temperature control and short-circuit protection, which is reassuring for long-term use. The power bank can be charged via an 18W charger, and it takes nearly 3 hours to achieve a full charge.
Final thoughts
Rapoo P101 Qi2 magnetic power bank
For Rs 1,299, the Rapoo P101 feels like a solid value-focused magnetic power bank. The Qi2 support, reliable magnetic hold, and especially the fast wired charging performance make it practical for everyday use.
Wireless charging speeds are decent rather than exceptional, particularly on larger battery phones, but the convenience factor is strong. If you want a compact magnetic power bank that also doubles as a fast wired charger when needed, the P101 does a good job balancing both.
For more daily updates, please visit our News Section.
The global version of the iQOO Z11 has now surfaced on its first benchmark, and it looks a bit different from the one that launched in China.
A new Geekbench listing for the device, carrying the model number I2512, confirms that the phone will run on Qualcomm’s Snapdragon 7s Gen 4 globally. Its Chinese counterpart uses a MediaTek Dimensity 8500 chip instead.
What the Geekbench listing reveals
The listing confirms the chip identity through the CPU and GPU combo. The chipset is built around an octa-core CPU configuration consisting:
1 core clocked at 2.71GHz
3 cores at 2.40GHz
4 cores at 1.80GHz
Graphics duties are handled by the Adreno 810 GPU, paired with 12GB of RAM. The device is also listed as running Android 16.
In terms of raw numbers, the phone posts a single-core score of 1,214 and a multi-core score of 3,091 on Geekbench.
Despite the chipset, the global model may share the same battery and charging specs. The Chinese Z11 packs a massive 9,020mAh unit. It also supports 90W wired charging and includes features like reverse charging.
Certifications hint at a wider launch
The global iQOO Z11 has already appeared on multiple certification platforms, including Indonesia’s SDPPI and Thailand’s NBTC. These are usually early signs that a launch isn’t too far off.
iQOO Z11 (China)
What’s missing, at least for now, is any listing in India. That could mean a delayed rollout, or simply that iQOO is prioritizing other devices first. There’s also the possibility that the company is spacing out releases to avoid overlap with upcoming Vivo-branded phones.
Either way, the Geekbench adds another piece to the puzzle. The global iQOO Z11 is on the way. It just might not be the same phone that debuted in China.
For more daily updates, please visit our News Section.
Login
